Panasonic ET-PKE12B Datasheet

Category
Projector mounts
Type
Datasheet
S P E C F I L E
ET-PKE12B
Bracket assembly
As of January 2012
SFL12A001
1 / 1
Weights and dimensions shown are approximate. Specifications subject to change without notice.
116. 5
(4-19 /32 )
482 (18-31/32)
598 ( 23-17/32)
Specifications
Dimensions (W × H × D): 482 × 116.5 × 598 mm
(18-31/32 × 4-19/32 × 23-17/32 inches)
Weight: Approx. 8.5 kg* (18.7 lbs*)
Applicable ceiling mount bracket: ET-PKE16H/PKE16S
Applicable projector: PT-EX12K
Parts
Projector mount bracket (bracket assembly) . . . . 1
Fixer plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Washer-fitted hexagonal bolts (M8 × 16) . . . . . . 12
Washer-fitted pan head hexagonal screws
(M5 × 12) . . . . . . . . . . . . . . . . . . . . . . . . . 4
Protection sheet . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
*
A
verage value. May differ depending on models.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This bracket assembly is used when mounting a Panasonic
’s applicable
projector to ceilings.
N
OTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKE16H/PKE16S ceiling mount bracket.
C a u t i o n :
Mounting should be done by a qualified technician.
Make sure that the mounting (ceiling) area has sufficient strength.
Read the enclosed mounting instructions thoroughly before starting.
Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
  • Page 1 1

Panasonic ET-PKE12B Datasheet

Category
Projector mounts
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI