S P E C F I L E
ET-PKV100S
Ceiling mount bracket for low ceilings
As of September 2011
SFL11A023
1 / 1
Weights and dimensions shown are approximate. Specifications subject to change without notice.
145
4–∅ 9 (∅ 11/ 32 )
Projector
72
(2-27/32)
171
(6-23/32)
88
(3-15/32)
(5-23/32)
132
(5-3/16)
94
(3-11/16)
82
(3-7/32)
256 (10-3/32)
Specifications
Vertical correction angle: ±15°
Horizontal slant correction angle: ±15°
Horizontal turn correction angle: 360°
Dimensions (W × H × D): 90 × 95 × 110 mm
(3-17/32˝ × 3-3/4˝ × 4 -11/32 ˝)
Weight: Approx. 1.2 kg* (2.6 lbs*)
Applicable bracket assembly: ET-PKV100B
The illustration shows the ceiling mount bracket when it is combined with the
ET-PKV100B and the PT-VW330/VX400 is attached.
Parts
Projector mount bracket . . . . . . . . . . . . . . . . . . . 1
Hexagonal torque wrench . . . . . . . . . . . . . . . . . . 1
*
Average value. May differ depending on models.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is used when mounting a Panasonic projector to low ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKV100B bracket assembly.
C a u t i o n :
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.