Focal Point Seem 4 LED Direct Suspended / Surface Mount FSM4LS Installation guide

Focal Point
Brand
Focal Point
Model
Seem 4 LED Direct Suspended / Surface Mount FSM4LS
Category
Signal cables
Type
Installation guide

This manual is also suitable for

Focal Point Seem 4 LED Direct Suspended / Surface Mount FSM4LS is a suspended or surface-mounted luminaire designed for commercial or residential applications. It features a sleek, modern design with a choice of flush or pop-down lenses to suit various lighting needs.

This versatile fixture offers multiple mounting options, including individual, continuous runs, or as an end or intermediate unit. The included universal suspension system allows for easy installation and adjustment.

The Seem 4 LED is equipped with advanced LED technology, providing energy efficiency and long-lasting performance. Its high-quality reflectors optimize light distribution, ensuring even illumination. The fixture is also dimmable, allowing for precise light control to create the desired ambiance.

Focal Point Seem 4 LED Direct Suspended / Surface Mount FSM4LS is a suspended or surface-mounted luminaire designed for commercial or residential applications. It features a sleek, modern design with a choice of flush or pop-down lenses to suit various lighting needs.

This versatile fixture offers multiple mounting options, including individual, continuous runs, or as an end or intermediate unit. The included universal suspension system allows for easy installation and adjustment.

The Seem 4 LED is equipped with advanced LED technology, providing energy efficiency and long-lasting performance. Its high-quality reflectors optimize light distribution, ensuring even illumination. The fixture is also dimmable, allowing for precise light control to create the desired ambiance.

©2023 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference
1 of 4
IS0518 REV. M
Seem® 4 LED
Suspended | FSM4LS
• Luminaires must be installed by a qualified
electrician (check with local and national
codes for proper installation).
• To prevent electrical shock, disconnect
electrical supply before installation or
servicing.
• Contractor is responsible for adequately
reinforcing walls and/or ceilings to support
fixture weight.
• Focal Point, LLC accepts no responsibility
for inadequately reinforced walls and/or
ceilings.
• The information contained in this drawing
is the sole property of Focal Point, LLC. Any
reproduction in part or whole without the
written permission of Focal Point, LLC is
prohibited.
POWER OFF
POWER ON
ATTENTION
SEE ADDITIONAL
INSTRUCTIONS
32
BEFORE YOU BEGIN COMPONENT KEY
INSTRUCTION KEY
FOCAL POINT
U - Individual
S - Start of run
I - Intermediate
E - End of run
Flush Lens
Joiner Bracket
(11849)
Joiner
Bracket
(11920)
Cable Gripper (73014)
& Nylon Nut (70044)
Joiner Pin
(W5687)
Reflector (70008)
(6-32 X 5/16 Pan-head
machine screw)
Pop-Down Lens
(indivudual housings
only up to 8’)
SHIPPED IN HARDWARE BAG
PARTS SHIPPED INSTALLED
TWO CABLE GRIPPERS EACH FOR
INDIVIDUAL AND START, ONE FOR
INTERMEDIATE AND END HOUSINGS.
FOLLOW FOCAL POINT
INSTRUCTIONS FOR UNIVERSAL
SUSPENSION SYSTEM ASSEMBLY.
SEE IS
1
INDIVIDUAL INSALLATIONS FOLLOW STEPS , , , ,  & 
2 of 4
IS0518 REV. M ©2023 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference
9
65
711
8
4
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
10 11
11 12
MAKE ELECTRICAL CONNECTION
14
13 SECURE REFLECTORS TO HOUSING
 SCREWS PER REFLECTOR
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
FLUSH LENS
3 of 4
IS0518 REV. M ©2023 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference
15
11
14
USE IMPRINT ON .” POPDOWN LENSES
TO ENSURE ALL LENSES ARE INSTALLED
FACING THE SAME DIRECTION
POPDOWN LENS
DRIVER SERVICE
11
11111
32 SECURE REFLECTORS TO HOUSING
 SCREWS PER REFLECTOR
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
EMERGENCY
SEE BATTERY MANUFACTURER
INSTRUCTIONS
emergency maximum mounting height:
19.00'
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
ASYMMETRIC LENS
ASYMMETRIC LENS
DISTRIBUTION DIRECTION
ASYMMETRIC ROOM FILL
LENS DISTRIBUTION
DIRECTION
14 14
4 of 4
IS0518 REV. M ©2023 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference
ACUITY nLIGHT
123
5
4
1 2 3
4 5
SEGMENTED
NETWORK
CABLE
CONNECTION
POINTS FOR
SEGMENTED
NETWORK CABLE
SEE MANUFACTURER’S
INSTRUCTIONS
WATTSTOPPER
HUBBELL NX
1
CONNECT
CAT CABLE
BY OTHERS
CONNECT
CAT CABLE
BY OTHERS
CAT CABLE
BY OTHERS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Focal Point Seem 4 LED Direct Suspended / Surface Mount FSM4LS Installation guide

Focal Point
Brand
Focal Point
Model
Seem 4 LED Direct Suspended / Surface Mount FSM4LS
Category
Signal cables
Type
Installation guide
This manual is also suitable for

Focal Point Seem 4 LED Direct Suspended / Surface Mount FSM4LS is a suspended or surface-mounted luminaire designed for commercial or residential applications. It features a sleek, modern design with a choice of flush or pop-down lenses to suit various lighting needs.

This versatile fixture offers multiple mounting options, including individual, continuous runs, or as an end or intermediate unit. The included universal suspension system allows for easy installation and adjustment.

The Seem 4 LED is equipped with advanced LED technology, providing energy efficiency and long-lasting performance. Its high-quality reflectors optimize light distribution, ensuring even illumination. The fixture is also dimmable, allowing for precise light control to create the desired ambiance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents