Focal Point Dart FDALS Installation guide

Brand: Focal Point

Model: Dart FDALS

Type: Installation guide

IS0551 REV. B 2016 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 1 of 2

FOLLOW FOCAL POINT

INSTRUCTIONS FOR

UNIVERSAL SUSPENSION

SYSTEM ASSEMBLY.

SEE IS0166

1112

dart™ suspended

FDALS

focal point

Luminaires must be installed by a qualiﬁed electrician (check with local and national codes for proper installation).

To prevent electrical shock, disconnect electrical supply before installation or servicing.

114

make electrical connections

U - individUal

s - start of rUn

i - intermediate

e - end of rUn

level

configurations are run specific, please consult factory drawings before beginning installation.

individual

insallations follow

steps 1, 2, 6, 7

key

power off

power on

attention

see additional instrUctions

AVOID ALL CONTACT WITH LED SURFACE,

LEDs ARE EASILY DAMAGED!

LOOSEN CABLE GRIPPER. DO NOT REMOVE.

Contractor is responsible for adequately reinforcing walls and/or ceilings to support luminaire weight. Focal Point, LLC accepts no responsibility for inadequately reinforced walls

and/or ceilings. The information contained in this drawing is the sole property of Focal Point, LLC. Any reproduction in part or whole without the written permission of Focal Point, LLC

is prohibited. Covered by US Patents: D645,192 S & D645,193 S. Covered by European Patent: (D)00170300.

DRIVER SERVICE

AVOID ALL CONTACT WITH LED SURFACE,

LEDs ARE EASILY DAMAGED!

REMOVE OPTIONAL BEAM SMOOTHING DIFFUSER

EMERGENCY

SEE BATTERY MANUFACTURER

INSTRUCTIONS

emergency maximUm moUnting height:

7.50'

Focal Point Dart FDALS Installation guide

Focal Point Dart FDALS Installation guide

Focal Point Dart FDALS Installation guide

Related papers