Midmark Procenter Systems Installation guide

Type
Installation guide

This manual is also suitable for

Midmark Procenter Systems: The Procenter is a versatile and reliable dental delivery system designed to enhance your practice's efficiency and patient care. Its innovative features include easy installation, precise leveling adjustments, secure umbilical positioning, and convenient accessory connections. The system's modular design allows for seamless integration of various accessories, ensuring a personalized and efficient workflow. This user-friendly system is ideal for dental professionals seeking to optimize their operatory setup and deliver exceptional patient experiences.

Midmark Procenter Systems: The Procenter is a versatile and reliable dental delivery system designed to enhance your practice's efficiency and patient care. Its innovative features include easy installation, precise leveling adjustments, secure umbilical positioning, and convenient accessory connections. The system's modular design allows for seamless integration of various accessories, ensuring a personalized and efficient workflow. This user-friendly system is ideal for dental professionals seeking to optimize their operatory setup and deliver exceptional patient experiences.

1
© Midmark Corporation 2003 SF-1661
2
1
3
4
DA134100i
003-1149-00 Rev. VA1 (7/7/2017)
Attention!
Do not remove tape or packaging
until Step 2 is complete.
LR Mounted Procenter, Asepsis 21 or
International (Whip) Delivery Unit Installation
Step 3: Install two stop pins.
Tip: Move stop pins under trim ring,
then down into holes.
Step 1: Remove connection box cover.
Step 4: Screw bottle into cap.
Step 2: Attach arm to casting.
Do not tighten bolt!
Parts Bag Contents
Stop Pins .................... 2
Special Tools
Level
Torque Wrench
Note: Procenter delivery unit shown
Style G
2
© Midmark Corporation 2003 SF-1661
2
4
1
3
DA134200i
Step 8: Loosen three button head screws.
Adjust three leveling screws until unit is level.
Tighten three button head screws.
Leveling Screws
Step 7: Remove bottom cover.
Step 6: Tighten bolt to
110-130 ft-lbs.
Step 5: Adjust three screws
until arm is level.
Step 9: Replace bottom cover.
Button Head Screws
Note: Steps 7 - 9 are Procenter delivery unit only.
3
© Midmark Corporation 2003 SF-1661
Step 10: Connect like-colored tubing.
Step 13: Position umbilical in notch
of connection box.
Step 14: Install connection box cover.
Attention!
Connect wire harnesses and tubing before placing umbilical in notch of connection box.
Accessories
Step 11: Connect accessory
wire harness to
J4 or J5 on PCB.
Chair Position Touch Pad
Step 12: Connect touch
pad wire harness
to J2 or J3 on PCB.
Connect ground wire.
Caution
Connect ground wire to ensure system ground continuity.
Failure to do so may result in electric shock.
Color Page
4
© Midmark Corporation 2003 SF-1661
2
4
1
3
DA134400i
Attention!
Perform these steps after installation of entire operatory is complete.
Step 15: Remove flex arm end cap.
Slide cover back.
Step 16: Remove wire tie from lock pawls.
5
© Midmark Corporation 2003 SF-1661
Midmark Corporation
60 Vista Drive
P.O. Box 286
Versailles, OH 45380-0286
937-526-3662
Fax 937-526-5542
www.midmark.com
For Units Having Deluxe Rheostat with Chip Air Foot
Control Only:
Make Chip Air Connection in Delivery Head.
A) Cut green 1/8" Coolant Air Supply tubing.
B) Locate clear 1/8” tubing coming into the unit head.
C) Use barbed tee and sleeves to tee the 1/8" clear tubing
into the 1/8" green coolant air tubing.
Deluxe Rheostat
with Chip Air
Unit Foot Control
Chip Air
1/8” Green
1/8” Clear
Color Page
6
© Midmark Corporation 2003 SF-1661
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Midmark Procenter Systems Installation guide

Type
Installation guide
This manual is also suitable for

Midmark Procenter Systems: The Procenter is a versatile and reliable dental delivery system designed to enhance your practice's efficiency and patient care. Its innovative features include easy installation, precise leveling adjustments, secure umbilical positioning, and convenient accessory connections. The system's modular design allows for seamless integration of various accessories, ensuring a personalized and efficient workflow. This user-friendly system is ideal for dental professionals seeking to optimize their operatory setup and deliver exceptional patient experiences.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI