2. Q-tran
  3. Q-TRAN NEXUS Q-CAP Flexible Fixtures
Q-TRAN NEXUS Q-CAP Flexible Fixtures

Q-tran Q-TRAN NEXUS Q-CAP Flexible Fixtures, NEXUS Q-CAP Flexible Fixtures Operating instructions

  • Hello! I've reviewed the installation instructions for the Q-Tran Flexible Fixture NEXUS WSC-02. This document covers both VHB mounting and mounting with White snug clips, emphasizing a 12-inch spacing for the clips. I am now ready to answer any questions you have about the installation process or features.
  • How often should the white snug clip be placed?
    What type of screw is used to mount the white snug clip?
    What is the first step of VHB mounting?
© 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-08-09-21
INSTALLATION Q-CAP Flexible Fixtures: NEXUS
1.
1.
2.
2.
3.
3.
12"
.07"
VHB MOUNTING
Align fixture to white snug clips matching distances. Press fixture into white snug clips.
Mount white snug clip with provided flat head screw.
Peel off secondary backing.Remove the backing from the adhesive and apply firm pressure to
the bonding surface.
Adhere to mounting surface.
#4x5/8" Flat head screw
INCLUDED HARDWARE
.21
"
.625"
WHITE SNUG CLIP
.25”
.44”
.50”
NOTE: White snug clip should be placed every 12"
WSC-02
/