Collaborate Assembly Instructions
Customer Service: 800 426 8562 E.C.O. No 5_46395 Part No 6100-0277 Rev 1 Page 3 of 15
(N) Easel Handlebars - Qty. 2
(P) Monitor Brackets
(Left & Right) - Qty. 2
(M) Easel Monitor Tubes - Qty. 2
(S154) #10-24 x 1/2” Screws - Qty. 26
(S330) 1/4-28 x 2” Button Head Screws - Qty. 4
(F) Covers - Qty. 4
(E) Metal Straps - Qty. 2
(R) Spring Plunger - Qty. 1
(S) Remote Holder - Qty. 1
(K) Horizontal Frame - Qty. 2 (L) Glides - Qty. 4
(J) Vertical Frame - Qty. 2
(S329) 1/4-28 x Square Nuts - Qty. 4
(S331) 3/8-16 x 1/2” Button Head Screws - Qty. 8
42, 48 width
66”, 69”
height
(G) Caster
(Locking) - Qty. 2
(OPTIONAL) (OPTIONAL)
(H) Casters
(Non-Locking) - Qty. 2
(OPTIONAL)
NOTE: Longer straps
are use with Monitor
applications.
22-3/4” - Long Leg
OR
(A) Fabric Surface Easel
Easel with Monitor Mount
Easel Mounting
Holes - Qty 4
Support Leg Holes
- Qty 4 (per side)
FOR EASEL WITH MONITOR MOUNT ACCESSORY
41.68” & 47.68”
Sock width
75.9” & 78.9”
Sock height
(D) Support Legs - Qty. 2 Front, 2 Back
Monitor
NOTE: Longer leg is used
with Monitor applications.
Non-Monitor
Pin
No Pin