Haworth 6100-0275 Operating instructions

Brand
Haworth
Model
6100-0275
Type
Operating instructions
Assembly Instructions
Congratulations on your
purchase of a new
Collaborate Fabric Screen!
For assembly assistance, visit haworth.com, call 800 426 8562, or email suppor[email protected]
Ready to assemble your new screen?
Follow all the steps carefully before using your screen.
That’s it! Now you’re ready to use your new screen.
Collaborate
36” to 48”
S331
S329
D
F
E
H
#10-24 x 1/2" Screw
(S154)
Tools Required
Collaborate Assembly Instructions
Customer Service: 800 426 8562 E.C.O. No 5_46395 Part No 6100-0275 Rev 1 Page 2 of 8

 
 
Assembly Overview
#2
1/4-28 Square Nut
3/16”(S329)
(S330)
1/4-28 x 2" Button Head Screw
3/8” Wrench
9/16” Wrench
Magnetic Tip 5/32” & 7/32”
Allen Wrench
A
K
K
F
G
S330
D
S154
S154
NOTE: Install fabric (A)
before installing support
legs (D).
(S331)
3/8-16 x 1/2" Button Head Screw
Collaborate Assembly Instructions
Customer Service: 800 426 8562 E.C.O. No 5_46395 Part No 6100-0275 Rev 1 Page 3 of 8
(A) Fabric Surface Easel
(S154) #10-24 x 1/2” Screws - Qty. 12
(S330) 1/4-28 x 2” Button Head Screws - Qty. 4
(G) Caster (Locking) - Qty. 2
(H) Casters (Non-Locking) - Qty. 2
(D) Support Legs - Qty. 2 Front, 2 Back
(E) Metal Straps - Qty. 2
(S331) 3/8-16 x 1/2” Button Head Screws - Qty. 8
(F) Covers - Qty. 4 (K) Horizontal Frame - Qty. 2
(L) Glides - Qty. 4
(J) Vertical Frame - Qty. 2
(S329) 1/4-28 x Square Nuts - Qty. 4
Non-Monitor
Monitor
Pin
NOTE: Longer leg is used
with Monitor applications.
No Pin
Easel without Accessaries
Support Leg
Holes - Qty 6
(per side)
36, 42, 48”
width
42”, 45”,
66”, 69”
height
NOTE: Longer straps
are use with Monitor
applications.
16” - Short Leg
22-3/4” - Long Leg
(OPTIONAL)
(OPTIONAL)
(OPTIONAL)
OR
Collaborate Assembly Instructions
Customer Service: 800 426 8562 E.C.O. No 5_46395 Part No 6100-0275 Rev 1 Page 4 of 8
#10-24 x 1/2" Screw
(S154)
1Assemble frame (J & K)
K
A
J
K
J
K
S154
S154
NOTE: Frame (J) orientation
doesn’t matter.
NOTE: Install screws (S154)
in the order as shown.
2
2
3
3
3
3
1
1
21
2
1
2Slide fabric (A) over frame (K & J)
NOTE: Make sure
these holes are
facing out.
NOTE: Make sure
these holes are
facing out.
Collaborate Assembly Instructions
Customer Service: 800 426 8562 E.C.O. No 5_46395 Part No 6100-0275 Rev 1 Page 5 of 8
3Loosely install legs (D)
Install metal straps (E)
4
1/4-28 Square Nut
3/16”(S329)
(S330)
1/4-28 x 2" Button Head Screw
S329
S331
S330
D
D
D
E
E
A
A
NOTE: Align holes in fabric (A)
with frame holes (J).
NOTE: Install metal straps (E) with
only 2 screws (S331). DO NOT
install screws in the slotted holes in
this step.
NOTE: DO NOT install
screws in the slotted
holes in this step.
(S331)
3/8-16 x 1/2" Button Head Screw
TIGHTEN
DO NOT TIGHTEN
DO NOT TIGHTEN
TIGHTEN
1
Collaborate Assembly Instructions
Customer Service: 800 426 8562 E.C.O. No 5_46395 Part No 6100-0275 Rev 1 Page 6 of 8
5Squeeze support legs (D) together and install screws (S331 )
Tighten all screws (S330) and nuts (S329)
6
A
A
S331
S331
D
(S331)
3/8-16 x 1/2" Button Head Screw
NOTE: Gap is expected.
Make sure gap is even.
1/4-28 Square Nut
3/16”(S329)
(S330)
1/4-28 x 2" Button Head Screw
1
1
2
1
2
SQUEEZE
SQUEEZE
SQUEEZE
GAP
TIGHTEN
TIGHTEN
SQUEEZE NOTE: Squeeze with
your hands to help
even out gap.
Collaborate Assembly Instructions
Customer Service: 800 426 8562 E.C.O. No 5_46395 Part No 6100-0275 Rev 1 Page 7 of 8
LOCKING
NON-LOCKING
LOCKING
NON-LOCKING
7Install casters (G & H)
Rotate easel (A) onto casters
8
G
H
A
A
L
G
GLIDE
CASTER
OR
Collaborate Assembly Instructions
Customer Service: 800 426 8562 E.C.O. No 5_46395 Part No 6100-0275 Rev 1 Page 8 of 8
9Install all 4 covers (F)
F
NOTE: If needed tap with
a plastic hammer only.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Haworth 6100-0275 Operating instructions

Brand
Haworth
Model
6100-0275
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents