Haworth 6100-0095
The Haworth 6100-0095 is a commercial-grade electric height-adjustable table designed for use in offices, conference rooms, and other commercial settings. It is certified to UL962 and CAN/CSA C22.2 No. 68 safety standards, ensuring its safe operation.
Key Features
- Electric height adjustment allows you to easily change the height of the table using the control module or programmable switch.
- The table has a maximum load capacity of 250 lbs, including the surface.
- The electrical rating is 120V, 60Hz, 6.5A.
- The table comes with a grounding plug for safety.
- It is available in various sizes and configurations to suit different needs and spaces.
Haworth 6100-0095
The Haworth 6100-0095 is a commercial-grade electric height-adjustable table designed for use in offices, conference rooms, and other commercial settings. It is certified to UL962 and CAN/CSA C22.2 No. 68 safety standards, ensuring its safe operation.
Key Features
- Electric height adjustment allows you to easily change the height of the table using the control module or programmable switch.
- The table has a maximum load capacity of 250 lbs, including the surface.
- The electrical rating is 120V, 60Hz, 6.5A.
- The table comes with a grounding plug for safety.
- It is available in various sizes and configurations to suit different needs and spaces.
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
51 of 22245-789 6100-0095
PLANES LT
PLANES LT
Pages 2 Thru 15
Pages 16 Thru 22
AFTER 9/2020
BEFORE 9/2020
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
(A) FIGURE 1
GROUNDED
PIN
2 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
IMPORTANT SAFETY INSTRUCTIONS
For use with Planes LT Electric Height Adjustable Table
For Commercial Use Only
This product is conforms to UL962 and is certied to CAN/CSA C22.2 No. 68
Electrical Rating: 120V, 60Hz, 6.5A
Maximum load including surface: 250 lbs
When using an electrical furnishing, basic precautions should always be followed, including the
following:
Read all instructions before using this table.
DANGER - To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning or servicing.
WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS:
1. Unplug from outlet before putting on or taking o parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids,
or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped into water. Return the furnishing to a
service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect, turn all controls to the o position, then remove plug from outlet.
9. WARNING: RISK OF ELECTRIC SHOCK - CONNECT THIS FURNISHING TO A PROPERLY GROUNDED
OUTLET ONLY. SEE GROUNDING INSTRUCTIONS.
10. WARNING: RISK OF ELECTRIC SHOCK, FIRE, AND INJURY. REVIEW THE ASSEMBLY INSTRUCTIONS TO
CONFIRM THAT THE APPROPRIATE CRITICAL COMPONENTS AND ACCESSORIES ARE BEING USED WITH THE
FURNISHING.
SAVE THESE INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accor-
dance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualied electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do
not modify the plug provided with the product - if it will not t the outlet, have a proper outlet installed by a qualied
electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in sketch A (see
Figure 1). Make sure that the product is connected to an outlet having the same conguration as the plug. No adapter should
be used with this product.
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
S-1
M
Control Module
3 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
Tools Required
#2
2mm
2.5mm
4mm
5mm & 6mm
Freestanding Tables
Installation Instructions
PLANES® LT
FOR ELECTRIC TABLESFREE STANDING TABLE - RECTANGLE
CUSTOMER SERVICE PHONE: 1-800-426-8562
#10 x 1" Pan Head Screw
(S-1)
S-1
S-24
S-24
H
K
S242
S-24
J
A
Scale 1 : 1
0 11/2
1/4 1/4
(S242)
Flat Head M10 X 25mm
6mm
M8 x 12mm
Button Head Screw
(S-24)
5mm
T40
OR
P
N
Standard Switch
Programmable
Switch
OR
S-1
T40
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
S-1
FOR EXTENDED TOPS
FREE STANDING TABLE - 90°
S-1
S-24
S-24
S-24
K
K
S242
J
H
B
A
USE TEMPLATE
WHEN INSTALLING
CORNER LEG!
IMPORTANT!
4 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
42-70” 52-70” 52-58” 52-58”
23-29” 23-29”
23-29”
46-70”
RECTANGLUAR (2 LEG) TABLE 90° (3 LEG) TABLE 120° (3 LEG) TABLE
#10 x 1" Pan Head Screw
(S-1)
(S242)
Flat Head M10 X 25mm
6mm
M8 x 12mm
Button Head Screw
(S-24)
5mm
T40
OR
S-1
S-1
L
L2
A2
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
S242
FREE STANDING TABLE - 120°
5 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
S-24
S-1
S-24
K
S-1
S-24
K
J
B
H
A
USE TEMPLATE
WHEN INSTALLING
CORNER LEG!
IMPORTANT!
42-70” 52-70” 52-58” 52-58”
23-29” 23-29”
23-29”
46-70”
RECTANGLUAR (2 LEG) TABLE 90° (3 LEG) TABLE 120° (3 LEG) TABLE
#10 x 1" Pan Head Screw
(S-1)
(S242)
Flat Head M10 X 25mm
6mm
M8 x 12mm
Button Head Screw
(S-24)
5mm
T40
OR
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
6 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
K
S241
J
Install foot (K)
1
CHECK FOR PARTS TO MATCH
2Install bracket (H)
H
S-24
S-24
J
DSL
DOUBLE STAGE
SSE
SINGLE STAGE
(S242)
Flat Head M10 X 25mm
6mm
M8 x 12mm
Button Head Screw
(S-24)
5mm
T40
OR
SSE
DSL
SSE
SSE
DSL
DSL
OR
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
7 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
Locate column (J) and predrill if necessary
3
H
A
J
42-70” 52-70” 52-58” 52-58”
23-29” 23-29”
23-29”
46-70”
RECTANGLUAR (2 LEG) TABLE 90° (3 LEG) TABLE 120° (3 LEG) TABLE
C-LEG T-LEG
30”
1.84”
1.82”
24” C
L
C
L
OR
NOTE: Only predrill if
necessary and use bracket (H)
as template.
1/4”
1/8”
Drill
1
H
H
B
B
3-3/4” - 6” Maximum 3.80” - 6” Maximum
3-3/4” - 6” Maximum 3.80” - 6” Maximum
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
8 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
Install top (A)
4
RECTANGLE TOPS 90° TOPS
120° TOPS
A
A
S-1
S-1
S-1
J
J
J
A
#10 x 1" Pan Head Screw
(S-1)
CHECK ALL LEGS (J)
ARE LEVEL!
IMPORTANT!
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
FOR EXTENDED TOPS ONLY
L2
L2
9 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
Install extend top (A)
5
#10 x 1" Pan Head Screw
(S-1)
#10 x 1" Pan Head Screw
(S-1)
Install rail (L2)
6
S-1
S-1
L
Table Width/
Length
64”
70”
L-Channel
Length
51”
57”
L-Channel Chart
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
10 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
7
8
FOR ELECTRIC TABLES
J
X
S-1
H
A
OR
S-1
2
3
#10 x 1" Pan Head Screw
(S-1)
J
H
OR G
F
1
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
1 2 3
4
FOR ELECTRIC TABLES
1 2 3
S
1 42 3
S
S
123
PRESET SWITCH INSTRUCTIONS
OR
Position top to desired height Press "S" button Press & hold desired button
Repeat for each setting
Initial Calibration
After assembly all electric tables must be calibrated to insure smooth and trouble free movement.
1. Lower the table to the lowest height by pressing the down arrow on the switch.
2. Continue to press the down arrow for 5 to 10 seconds.
NOTE: The table will readjust itself if needed.
Saving a height position with the preset switch
1. Position the top to the desired height
2. Press the S button
3. Within 5 seconds press the desired number key (1-4) until a double click is heard.
NOTE: The readout will show for example S(number) until the double click is heard and then the height readout will return
Changing from inches to centimeters
The table ships set to read in inch increments but can be changed on site to read in centimeters.
Press the 1, 2 and up arrow buttons simultaneously
Use the up and down arrow keys until the readout shows S 5
Press the S button to complete
Use the same procedure to switch back to inches
Moving to a preset height
Press the appropriate number button.
Continue to press the button until the saved position is reached.
11 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
24” DEPTH TOPS
ALIGN WITH EDGE OF WORKSURFACE
MEASURE FROM EDGE OF WORKSURFACE
7”
24” 30”
30” DEPTH TOPS
9-1/8”
OR
TEMPLATE FOR 90° TABLES
12 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
Scale 1 : 1
0 11/2
1/4 1/4
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
7”
9-1/8”
24”
30”
TEMPLATE FOR 90° TABLES
13 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
Scale 1 : 1
0 11/2
1/4 1/4
1/4”
1/8”
Drill
1/4”
1/8”
Drill
1/4”
1/8”
Drill
1/4”
1/8”
Drill
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
24” DEPTH TOPS
30” DEPTH TOPS
ALIGN WITH EDGE OF WORKSURFACE
ALIGN WITH EDGE OF WORKSURFACE
MEASURE FROM EDGE OF WORKSURFACE
7”
7”
30”
24”
OR
14 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
TEMPLATE FOR 120° TABLES
Scale 1 : 1
0 11/2
1/4 1/4
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
24” DEPTH TOPS
30” DEPTH TOPS
15 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
TEMPLATE FOR 120° TABLES
Scale 1 : 1
0 11/2
1/4 1/4
7”
7”
1/4”
1/8”
Drill
1/4”
1/8”
Drill
1/4”
1/8”
Drill
1/4”
1/8”
Drill
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
GROUNDED
PIN
(A) FIGURE 1
16 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
IMPORTANT SAFETY INSTRUCTIONS
For use with Planes LT Electric Height Adjustable Table
For Commercial Use Only
This product is conforms to UL962 and is certied to CAN/CSA C22.2 No. 68
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this table.
DANGER - To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning.
WARNING - TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
1. Unplug from outlet before putting on or taking o parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recom-
mended by the manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn all controls to the o position, then remove plug from outlet.
9. WARNING: RISK OF ELECTRIC SHOCK - CONNECT THIS FURNISHING TO A PROPERLY GROUNDED
OUTLET ONLY. SEE GROUNDING INSTRUCTIONS.
10. WARNING: RISK OF ELECTRIC SHOCK, FIRE, AND INJURY. REVIEW THE ASSEMBLY INSTRUCTIONS TO
CONFIRM THAT THE APPROPRIATE CRITICAL COMPONENTS AND ACCESSORIES ARE BEING USED WITH THE
FURNISHING.
SAVE THESE INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualied electrician or serviceman if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product - if it will not t the outlet, have a proper outlet installed by a
qualied electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in sketch A
(see Figure 1). Make sure that the product is connected to an outlet having the same conguration as the plug. No adapter
should be used with this product.
Electrical Rating: 120V, 60Hz, 6.5A
Maximum load including surface: 250 lbs
Scale 1 : 1
0 11/2
1/4 1/4
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
S-1
S-1
P
N
Standard Switch
Programmable
Switch
OR
S-1
M
Control Module
17 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
Tools Required
#2
2mm
2.5mm
4mm
5mm & 6mm
Freestanding Tables
Installation Instructions
PLANES® LT
FOR ELECTRIC TABLES
CUSTOMER SERVICE PHONE: 1-800-426-8562
#10 x 1" Pan Head Screw
(S-1)
S-1
S240
S240
H
K
S-82
(S-82)
Button Head M10 X 12mm
S-24
J
A
E
M8 x 12mm
Button Head Screw
(S-24)
5mm
M8 x 16mm Button Head
(S240)
5mm
WHEN USING RAIL (E)
MAKE SURE TO USE
LONGER SCREWS (S240)
IMPORTANT!
Scale 1 : 1
0 11/2
1/4 1/4
5245-789
FREE STANDING TABLE - RECTANGLE
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
18 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
Incremental Column
Electric Single Stage - Standard Touch Pad Actuator
Electric Single Stage - Programmable Touch Pad Actuator
Electric Dual Stage High - Programmable Touch Pad Actuator
Electric Dual Stage High - Standard Touch Pad Actuator
Electric Dual Stage Low - Standard Touch Pad Actuator
Electric Dual Stage Low - Programmable Touch Pad Actuator
Electric Control
Module
WHITE
BLACK
BLACK
VIOLET
VIOLET
BROWN
BROWN
Color
Code Label
COLOR CODED PARTS CHART
Column
WW
X
23" OR 29"
CHART
A
E
RAILSACTUAL
TOP SIZE
23" or 29"
X
34"
40"
46"
52"
58"
64"
70"
26.9"
32.9"
38.9"
44.9"
50.9"
56.9"
62.9"
NOTE: When using
L-rail (E)
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
K
S-82
19 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
(S-82)
Button Head M10 X 12mm
J
H
S-24
S240
J
E
Install foot (M)
1
2Install support rail (E)
M8 x 16mm Button Head
(S240)
5mm
M8 x 12mm
Button Head Screw
(S-24)
5mm
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
20 of 22 6100-0095 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
Install top (A)
4
#10 x 1" Pan Head Screw
(S-1)
S-1
A
5245-789
STATE: PRODUCTION ECO/ECN: 245-789A EFF DATE: 01/16/2023
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
Haworth 6100-0095
The Haworth 6100-0095 is a commercial-grade electric height-adjustable table designed for use in offices, conference rooms, and other commercial settings. It is certified to UL962 and CAN/CSA C22.2 No. 68 safety standards, ensuring its safe operation.
Key Features
- Electric height adjustment allows you to easily change the height of the table using the control module or programmable switch.
- The table has a maximum load capacity of 250 lbs, including the surface.
- The electrical rating is 120V, 60Hz, 6.5A.
- The table comes with a grounding plug for safety.
- It is available in various sizes and configurations to suit different needs and spaces.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Haworth 6100-0051 Operating instructions
-
Haworth 6100-0189 Operating instructions
-
Haworth 6100-0018 Operating instructions
-
Haworth 7029-9930 Operating instructions
-
Haworth 7029-9932 Operating instructions
-
Haworth 7021-6844f Operating instructions
-
Haworth 6100-0128 Operating instructions
-
Haworth 6100-0060 Operating instructions
-
Haworth 7029-9903a Operating instructions
-
Haworth 6100-0059 Operating instructions
