Troy-Bilt 12AV566N211, 12AV566M011 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 12AV566N211 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
Use cable tie to
secure cables
to lower handle.
1
2
3
4
Refer to Operator’s Manual for instructions on attaching the grass catcher.
(A) Move
hairpin clip to
inside hole.
(B) Insert
carriage bolt
and tighten
with wing nut.
Repeat on
opposite side.
778-1147512AV566
Starter
Rope
Blade Control Handle
© 2007
Star Knobs
(A) Hold blade
control handle
against upper
handle.
(B)(C) Slowly slip
starter rope into
rope guide.
(D) Tighten rope
guide wing knob.
(A) Lift handle to
extended position.
(B) Tighten star
knobs.
A
B
A
C
D
B
A
B
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with gas to within 1/2-inch of
top of tank.
Fill engine with entire contents of oil bottle
supplied.
5
6
Need Help?
Call 1-888-TO-HELP-U
Gas Cap
Oil Fill
Depress blade control handle and hold.
8
7
Pull recoil starter with quick, full arm stroke.
If engine does not start after ten seconds of
repeated pulls, wait a few minutes and repeat.
/