Troy-Bilt 12AG836G211, 12AG836E011 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 12AG836G211 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
Secure cable to lower handle with
cable tie provided.
1
2
3
4
Refer to Operator’s Manual for instructions on attaching the grass catcher.
Insert carriage bolts and tighten with star knobs.
Repeat on opposite side.
12AG836E011
12AG836G211
778-11133A
© 2006
Starter
Rope
Blade Control Handle
Star Knobs
A
C
D
B
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Tighten rope guide wing knob.
A
B
Lift handle to extended position.
Tighten star knobs.
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with gas to within 1/2 inch of
top of tank.
Fill engine with entire contents of oil bottle
supplied with your mower.
5
6
Gas Cap
Oil Fill
Need Help?
Call 1-888-TO-HELP-U
Depress blade control handle and hold.
8
7
Pull starter rope with quick, full arm stroke.
If engine does not start after ten seconds of
repeated pulls, wait a few minutes and repeat.
Electric start battery must be charged for 8-10 hours
before initial use. See Maintenance Section in Operators
Manual.
/