Troy-Bilt 12AV556O711 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 12AV556O711 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
A
B
C
D
A
A
B
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Insert carriage bolt and tighten with wing nuts.
Move hairpin clip to inside hole.
Secure cable to lower handle with
cable tie provided with unit.
Lift handle to extended position.
Tighten star knobs.
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Tighten rope guide wing knob.
Starter
Rope
Blade Control Handle
Star Knobs
778-11110© 2006 12AV556O711
IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
Push primer five times.
Fill tank with gas to within 1/2 inch of top of tank.
Depress blade control handle and hold.
Fill engine with entire contents of oil
bottle supplied with your mower.
Pull starter rope with quick, full arm stroke.
If engine does not start after five pulls,
repeat steps seven thru nine.
Call 1-888-TO-HELP-U
Need Help?
(1-888-864-3578)
Gas Cap
Oil
Primer
/