Alcatel Omni Office
4125 Conference
Module
Quick Guide
Key Description
On / Off
Mute (Micro Tuning)
Reduces Speaker Volume
Increases Speaker Volume
Tuning the Sound Quality
Additional Guides available at
http://www.swcomms.co.uk/resource-
centre/user-guides-and-manuals
Service Desk 01392 330033
email: [email protected]
Customer Service 01392 315315
email: [email protected]
Issue 9 25.2.16
Configuration
Configure your phone with the “headset mode”:
Adjusting the microphone sensitivity
(during the call)
Press and hold the mute button for 3
seconds until the LEDs start to flash and you hear
a tone.
Increase the microphone volume using
+ and reduce it using -.
Press the mute button to conclude setting
the selected microphone
Tuning the sound manually
The Conferencing Module adjusts itself
automatically when you switch it on to eliminate
echo. If despite this, you still experience reduced
sound quality, it can be turned manually at any
time : press trim, a short noise is heard.
Switching between telephone/external module
hands-free
Press the hands-free/loudspeaker key of
your phone to switch between the phone hands-
free and the Conferencing Module hands-free.
/