2. OZCO
  3. 56670 Joist Hanger Flush 8″-10″ – LS

OZCO 56670 Joist Hanger Flush 8″-10″ – LS, 51770 Joist Hanger Flush 8″-10″ – IW Operating instructions

  • Hello! I've reviewed the Installation Instructions for the OZCO JHF-810-LS and JHF-810-IW Joist Hangers. This document details the features, styles, and installation processes for these products, including information about the required tools, flush, and angled installations. I am ready to answer your questions about these joist hangers.
  • What tools are required for installation?
    What are the two styles available?
    Can the joist hangers be installed at an angle?
    What is the effective date of these instructions?
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
Typical Installation
Laredo Sunset shown
Installation Instructions,
56670 8-10" Joist Hanger Flush (JHF-810-LS)
51770 8-10" Joist Hanger Flush (JHF-810-IW)
Installation Instructions, 56670 1
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
Laredo Sunset & Ironwood
Laredo Sunset & Ironwood
3
2 great styles
Same functionality
choose your
connection lifestyle
both styles available for
most products
Ironwood
(517XX series)
Laredo Sunset
(566XX series)
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
kit contains 4 assemblies
70
2.74
168
6.62
151
5.94
1.50 MIN
1.90 MAX
56670
Installation Instructions, 56670 4
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
69.60
2.74
166.15
6.54
51770
Installation Instructions, 56670 5
kit contains 4 assemblies
158.77
6.25
1.50 MIN
2.00 MAX
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
Suggested Tools
(others may be required)
Installation Instructions, 56670 6
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
Tool Required
1/4" Driver
Screw
Typical Installation & Basic Assembly
Installation Instructions, 56670 7
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
Tool Required
3/8" Driver
Cap (finger tight)
OWT Timber Screw
Tool Required
1/4" Driver
Screw
relief cuts
angle as desired
5XX69 angled
installation shown; same
for other joist hangers
rafter flush to beam
beam
rafter
5XX39 5XX40 5XX70
5XX69
Angled Rafter Installation
Installation Instructions, 56670 8
/