V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
56677
Typical Installation
Laredo Sunset shown
upper fasteners sold separately;
OWT Timber Screws or OWT Timber Bolts
51777
Installation Instructions,
56677 8” Post to Beam Coupler (P2B-SB-LS)
51777 8” Post to Beam Coupler (P2B-SB-IW)
Installation Instructions, 56677
1
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
2 great styles
Same functionality
choose your
connection lifestyle
both styles available for
most products
Ironwood
(517XX series)
Laredo Sunset
(566XX series)
Laredo Sunset & Ironwood
Laredo Sunset & Ironwood
3
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
kit contains 2 assemblies
127
5.00
314
12.35
56677
Installation Instructions, 56677
4
1.47 MIN
1.88 MAX
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
127
5.00
51
48
2.00
1.88
305
12.00
kit contains 2 assemblies
56677
Installation Instructions, 56677
5
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
Suggested Tools
(others may be required)
Installation Instructions, 56677
6
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
beam width
mark location
to mount ledge
step 1
Installation Instructions, 56677
7
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
step 2
Installation Instructions, 56677
8
Tool Required
3/8" Driver
(Hex Cap Nut) provided
(OWT Screw) provided
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
both sold separately
OWT Timber
Screw
56621
beam
rests on
ledge
(HCN)
Tool Required
3/8" Driver
(OWT Timber Screw)
step 3 Timber Screws
Installation Instructions, 56677
9
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
step 3 Timber Bolts
Installation Instructions, 56677
10
beam
rests on
ledge
Tool Required
3/8" Driver
(HCN)
(Timber Bolt)
OWT Timber Bolt
sold separately
see Installation Instructions,
OWT Timber Bolts BEFORE
proceeding
/
