2. OZCO
  3. 56668 4″ Flush Inside 45 Angle Bracket – LS

OZCO 56668 4″ Flush Inside 45 Angle Bracket – LS Operating instructions

  • Hello! I've reviewed the OZCO installation instructions for the Flush Inside 45 connectors, specifically the Laredo Sunset FI45-LS-4 and Ironwood FI45-IW-4 models. These instructions cover the assembly and tools needed for a 45-degree flush inside connection using the provided OWT hardware. I'm ready to answer your questions about these connectors.
  • What styles are available for the Flush Inside 45 connectors?
    How many assemblies are included in a kit?
    What tools are required for installation?
V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/3/2016 . This information is updated periodically
and should not be relied upon after 2 years from 8/3/2016 . Please visit OZCOBP.com to get current information.
Typical Installation
Laredo Sunset shown
4” Flush Inside 45 (FI45-LS-4)
4” Flush Inside 45 (FI45-IW-4)
Installation Instructions,
56668
51768
Installation Instructions, 56668 1
V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/3/2016 . This information is updated periodically
and should not be relied upon after 2 years from 8/3/2016 . Please visit OZCOBP.com to get current information.
2 great styles
Same functionality
choose your
connection lifestyle
both styles available for
most products
Ironwood
(517XX series)
Laredo Sunset
(566XX series)
Laredo Sunset & Ironwood
Laredo Sunset & Ironwood
3
V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/3/2016 . This information is updated periodically
and should not be relied upon after 2 years from 8/3/2016 . Please visit OZCOBP.com to get current information.
91
3.57
91
3.57
45°
56668
7
Installation Instructions, 56668
kit contains 4 assemblies
75
2.95
V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/3/2016 . This information is updated periodically
and should not be relied upon after 2 years from 8/3/2016 . Please visit OZCOBP.com to get current information.
75
2.95
kit contains 4 assemblies
51768
7
Installation Instructions, 56668
91
3.57
91
3.57
45°
V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/3/2016 . This information is updated periodically
and should not be relied upon after 2 years from 8/3/2016 . Please visit OZCOBP.com to get current information.
Suggested Tools
(others may be required)
Installation Instructions, 56668 6
V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/3/2016 . This information is updated periodically
and should not be relied upon after 2 years from 8/3/2016 . Please visit OZCOBP.com to get current information.
Typical Installation & Basic Assembly
Installation Instructions, 56668 7
Tool Required
3/8" Driver
Hex Cap Nut
OWT Timber Screw
Tool Required
1/4" Driver
Screw
/