2. OZCO
  3. 56640 Joist Hanger Tab Connectors 6″- 8″ – LS

OZCO 56640 Joist Hanger Tab Connectors 6″- 8″ – LS Operating instructions

  • Hello! I've reviewed the OZCO installation instructions for JHT-68-LS and JHT-68-IW joist hanger tabs. This document outlines the installation process and notes the tools required. I'm ready to answer your questions about these products.
  • What are the two styles available for the joist hanger tabs?
    What size of driver is needed for screw installation?
    What size of driver is needed for OWT Timber Screw?
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
Installation Instructions,
56640 6-8" Joist Hanger Tab (JHT-68-LS)
51740 6-8" Joist Hanger Tab (JHT-68-IW)
1
Installation Instructions, 56640
Typical Installation
Laredo Sunset shown
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
2 great styles
Same functionality
choose your
connection lifestyle
both styles available for
most products
Ironwood
(517XX series)
Laredo Sunset
(566XX series)
Laredo Sunset & Ironwood
Laredo Sunset & Ironwood
3
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
1.50 MIN
1.88 MAX
kit contains 6 assemblies
56640
Installation Instructions, 56640 4
70
2.74
117
4.62
95
3.75
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
kit contains 6 assemblies
1.50 MIN
2.00 MAX
70
2.74
117
4.62
95
3.75
51740
Installation Instructions, 56640 5
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
Suggested Tools
(others may be required)
6
Installation Instructions, 56640
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
Tool Required
1/4" Driver
Screw
flush with
bottom of
beam
beam
step 1
Installation Instructions, 56640 7
V2.00 - Installation Instructions, Specifications and Project Plans are effective 1/15/2018 . This information is updated periodically
and should not be relied upon after 2 years from 1/15/2018 . Please visit OZCOBP.com to get current information.
Tool Required
3/8" Driver
Cap (finger tight)
OWT Timber Screw
5XX39 5XX40 5XX70
5XX69
relief cuts
angle as desired
rafter flush to beam
beam
rafter
Angled Rafter Installation
Installation Instructions, 56640 8
Tool Required
1/4" Driver
Screw
5XX69 angled
installation shown; same
for other joist hangers
/