V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Laredo Sunset featured in this document.
for use with nominal 2x4 (1-1/2" x 3-1/2")
1
Installation Instructions, Rail Saddles
Installation Instructions,
4x4 Post Base with 2 Rail Saddles (4X4-TRS-LS) (56630)
4x4 Post Base with 2 Rail Saddles (4X4-TRS-IW) (51730)
4x4 Post Base with Rail Saddle (4X4-TRS-LS) (56631)
4x4 Post Base with Rail Saddle (4X4-TRS-IW) (51731)
6x6 Post Base with 2 Rail Saddles (6x6-TRS-LS) (56672)
6x6 Post Base with 2 Rail Saddles (6x6-TRS-IW) (51772)
6x6 Post Base with Rail Saddle (6x6-TRS-LS) (56671)
6x6 Post Base with Rail Saddle (6x6-TRS-IW) (51771)
2x4 Top Rail Saddle (2x4-TR) (56641)
can be
configurated
as corner too
can be
configurated
as inline too
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
6x6
4x4
OZCO
3
Installation Instructions, Rail Saddles
56631
56641
51730
51731
51771
51772
56630
56671
56672
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Suggested Tools
(others may be required)
4
Installation Instructions, Rail Saddles
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Base Mounting-56630 & 56631
(select fastener that suits your installation)
5
Installation Instructions, Rail Saddles
1x
or
or
4x
4x
Mount Base to Surface
4x
1x
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
step 1
6
Installation Instructions, Rail Saddles
Laredo Sunset 4x4 style shown
=
=
=
=
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Laredo Sunset 4x4 style shown
step 2 5XX30 & 5XX72
7
Installation Instructions, Rail Saddles
inline configuration
corner configuration
Tool Required
3/8" Driver
(HCN)
(OWT Timber Screw)
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
step 3 5XX30 & 5XX72
8
Installation Instructions, Rail Saddles
Laredo Sunset 4x4 style shown
Tool Required
Torx T25 driver
Screw
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Laredo Sunset 4x4 style shown
step 2 5XX31 & 5XX71
9
Installation Instructions, Rail Saddles
Tool Required
3/8" Driver
(HCN)
(OWT Timber Screw)
6x6
Rail Saddle
compression
plate
Rail Saddle compression plate ONLY
standard
compression
plate
DO NOT
use lower mounting holes
holes
mounting
use upper
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
step 3 5XX31 & 5XX71
10
Installation Instructions, Rail Saddles
Laredo Sunset 4x4 style shown
Tool Required
Torx T25 driver
Screw
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
56641 installation
11
Installation Instructions, Rail Saddles
shown with 56607
(sold separately)
Laredo Sunset 4x4 style shown
Tool Required
Torx T25 driver
Screw
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Special Instructions-mounting next to wall
12
Installation Instructions, Rail Saddles
additional instructions
center post as shown in •
previous steps
install 1 compression plate •
with fasteners
remove, reposition & reinstall •
post/compression plate as
shown with plate facing wall
complete assembly as shown•
this procedure applies to all OZCO
Post Bases & Post Anchors utilizing
compression plates (56607 shown)
Laredo Sunset 4x4 style shown
step 2
step 3
step 1
base mounting
38
1.50
step 4
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Installation Idea's-5XX41
13
Installation Instructions, Rail Saddles
relief cut
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Porch standalone
14
Installation Instructions, Rail Saddles
Laredo Sunset 4x4 style shown
5XX31
5XX30
(inline
configuration)
5XX41
5XX30
(corner
configuration)
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Laredo Sunset 4x4 style shown
Multi-level
15
Installation Instructions, Rail Saddles
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/23/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/23/2016 . Please visit OZCOBP.com to get current information.
Stairs
16
Installation Instructions, Rail Saddles
Laredo Sunset 4x4 style shown
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
OWT Ornamental Wood Ties 51771 Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
OWT Ornamental Wood Ties 56630 Specification
-
OZCO 56607 Dimensions Guide
-
-
OZCO 56650 Operating instructions
-
OWT Ornamental Wood Ties 16621 Installation guide
-
-
-
-
OWT Ornamental Wood Ties 51709 Installation guide
-
Other documents
-
OZCO 51731 4″x4″ Post Base Single Rail Saddle – IW Operating instructions
-
OZCO 16649 3/4″ x 4″-6″ OWT Timber Bolt Operating instructions
-
OZCO 16622 Hammered Dome Cap Nut Operating instructions
-
OZCO 56661 Gate T Hinge Operating instructions
-
Oz-Post 50130-1 Installation guide
-
OZCO 56676 8″ Post to Beam Flush – LS Operating instructions
-
OZCO 56667 4″ “T” Tie Plate – LS Operating instructions
-
OZCO 56637 Installation guide
-
OZCO 57704 Plant Hanger Hook Installation guide
-
OZCO 56636 Post to Beam Bolt Offset – LS Operating instructions
