OZCO 16649 3/4″ x 4″-6″ OWT Timber Bolt Operating instructions

Type
Operating instructions

This manual is also suitable for

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/22/2016 . This information is updated periodically
and should not be relied upon after 2 years from 4/22/2016 . Please visit OZCOBP.com to get current information.
Installation Instructions,
1/2" OWT Thru-Bolt Timber Fasteners
1
Installation Instructions, .50 OWT Thru-Bolt
Timber Fasteners
Optimum Size Selection Table
width range Timber Bolt
1.5-4" 56694
4.25-6" 56695
6.25-8" 56696
8.25-10" 56697
10.25-12" 56698
Timber Bolts may be
installed as a standalone
fastener or with many
OZCO connector options
Timber Bolts are usable .25" past documented range, however use
table for best selection
Recommended MAX tightening torque: 5in/lbs
Width range tolerance: +.25"/-.0Timber Bolts with 2 connectors: custom widths are possible when
eliminating 1 connector & stud
for heavier duty applicatons,
see 3/4" OWT Thru-Bolt Timber Fasteners
connectors
stud
How does it work?
excess threads are concealed
carriage bolts
compare to
no exposed dangerous edges
5 width ranges to choose from
tightens from the inside
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/22/2016 . This information is updated periodically
and should not be relied upon after 2 years from 4/22/2016 . Please visit OZCOBP.com to get current information.
Application Idea's...
8
Installation Instructions, .50 OWT Thru-Bolt
Timber Fasteners
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/22/2016 . This information is updated periodically
and should not be relied upon after 2 years from 4/22/2016 . Please visit OZCOBP.com to get current information.
Suggested Tools
(others may be required)
Installation Instructions, .50 OWT Thru-Bolt
Timber Fasteners 4
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/22/2016 . This information is updated periodically
and should not be relied upon after 2 years from 4/22/2016 . Please visit OZCOBP.com to get current information.
Prevent Unsightly Breakouts
drill most of the way from one
side DO NOT breakout then
repeat from opposite side
Drill 1/2" hole(s) as level as possible to ensure
straight path to align with hole from opposite side
secure boards
together while
drilling
step 1 & 2
Installation Instructions, .50 OWT Thru-Bolt
Timber Fasteners 5
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/22/2016 . This information is updated periodically
and should not be relied upon after 2 years from 4/22/2016 . Please visit OZCOBP.com to get current information.
step 3
Installation Instructions, .50 OWT Thru-Bolt
Timber Fasteners 6
Remove HCN's & Bolts,
rotate to match widths
then slide into drilled hole
shown completely installed
width
width
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/22/2016 . This information is updated periodically
and should not be relied upon after 2 years from 4/22/2016 . Please visit OZCOBP.com to get current information.
see torque
spec on
page 1
Tool Required
1/4" Driver
(Small Timber Bolt)
see torque spec on page 1
step 4 & 5
Installation Instructions, .50 OWT Thru-Bolt
Timber Fasteners 7
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/22/2016 . This information is updated periodically
and should not be relied upon after 2 years from 4/22/2016 . Please visit OZCOBP.com to get current information.
Cap (finger tight)
4mm Hex
Tool Required
1/4" Driver
step 6
Installation Instructions, .50 OWT Thru-Bolt
Timber Fasteners 8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

OZCO 16649 3/4″ x 4″-6″ OWT Timber Bolt Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI