Aqueon LED Widescreen Aquarium Kit Setup Manual

Type
Setup Manual
Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
Surface should be able to easily
support more than 200 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
Gravel depth should measure
about 1" - 3" from the bottom.
Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
Surface should be able to easily
support more than 200 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
Gravel depth should measure
about 1" - 3" from the bottom.
See reverse for additional information.
Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
Surface should be able to easily
support more than 200 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
Gravel depth should measure
about 1" - 3" from the bottom.
Place plants and décor items into
aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
Assemble lter and insert rinsed
lter cartridge according to
included lter instructions.
• Place lter in center of back
of frame.
Read and follow included heater
instructions.
• Consult your retailer for ideal
temperature setting. Adjust heater
dial as directed.
Place heater next to lter
and suction to back of aquarium.
Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
Gravel depth should measure
about 1" - 3" from the bottom.
Place plants and décor items into
aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
Assemble lter and insert rinsed
lter cartridge according to
included lter instructions.
• Place lter in center of back
of frame.
Read and follow included heater
instructions.
• Consult your retailer for ideal
temperature setting. Adjust heater
dial as directed.
Place heater next to lter
and suction to back of aquarium.
Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
Surface should be able to easily
support more than 200 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
Gravel depth should measure
about 1" - 3" from the bottom.
Add Water Conditioner as directed
Pour room-temperature water into
aquarium over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
Add water conditioner.
Assemble lter and insert rinsed
lter cartridge according to
included lter instructions.
• Place lter in center of back
of frame.
Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
Surface should be able to easily
support more than 200 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
Carefully pour rinsed gravel
into middle of aquarium.
• Spread gravel evenly
around aquarium bottom.
Gravel depth should measure
about 1" - 3" from the bottom.
Add Water Conditioner as directed
Pour room-temperature water into
aquarium over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
Add water conditioner.
Assemble lter and insert rinsed
lter cartridge according to
included lter instructions.
• Place lter in center of back
of frame.
Read and follow included heater
instructions.
• Consult your retailer for ideal
temperature setting. Adjust heater
dial as directed.
Place heater next to lter
and suction to back of aquarium.
R49980
Place light hood on aquarium, making
sure lter and heater cords ow through
opening in back of light hood to ensure
proper tight t.
Plug in lter, light hood and heater using
the “drip loop” method. (see above)
Remove insert from back of light hood
Pour room-temperature water into
aquarium over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
Add water conditioner.
Assemble lter and insert rinsed
lter cartridge according to
included lter instructions.
• Place lter in center of back
of frame.
Read and follow included heater
instructions.
• Consult your retailer for ideal
temperature setting. Adjust heater
dial as directed.
Place heater next to lter
and suction to back of aquarium.
R49980
Turn off light, unplug and remove light hood.
Place sh, while in bag from store, into
aquarium. Let sit for 20 minutes.
• Open bag and add about 1/2 cup of aquarium
water. Wait 5 minutes. Repeat once.
Carefully allow sh to enter aquarium.
Replace light hood and plug in.
Assemble lter and insert rinsed
lter cartridge according to
included lter instructions.
• Place lter in center of back
of frame.
Read and follow included heater
instructions.
• Consult your retailer for ideal
temperature setting. Adjust heater
dial as directed.
Place heater next to lter
and suction to back of aquarium.
R49980
Turn off light, unplug and remove light hood.
Place sh, while in bag from store, into
aquarium. Let sit for 20 minutes.
• Open bag and add about 1/2 cup of aquarium
water. Wait 5 minutes. Repeat once.
Carefully allow sh to enter aquarium.
Replace light hood and plug in.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Aqueon LED Widescreen Aquarium Kit Setup Manual

Type
Setup Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI