MOUNTUP MU0037 User manual

Brand: MOUNTUP

Model: MU0037

Type: User manual

MOUNTUP MU0037 is a versatile TV wall mount designed for hassle-free installation and optimal viewing experiences. It supports a wide range of TVs with VESA patterns from 100x100mm to 400x400mm and weighing up to 66lbs. The mount features a gas spring mechanism that allows effortless height adjustment and smooth tilting, ensuring the perfect viewing angle for your TV. With its sturdy construction and pre-assembled components, the MOUNTUP MU0037 ensures a quick and secure installation process.

Upper Arm

01 x1 02 x1 3A x2 3B x2 04 x2 05 x1

TV Plate Extenders Wall Plate

Cover

Step 3-2

Attach the brackets

Min: 100x100mm /4x4"

Max: 400x400mm/16x16"

WMA-44MU-DY

Hardware Included

Step 2 Mesure your TV pattern

Step 1-1 Select TV screw diameter

Capatity:

(5~30KG)

11~66LBS

Safety Caution

Please read this instruction carefully before installation.

If you do not understand these instructions or have doubts about the safety of the installation, assembly

or use of this product, please contact us.

● This product is designed for use in wood stud or solid concrete wall.

- DO NOT install into drywall alone.

● The wall must be capable of supporting five times the weight of the TV and mount combined.

● Incorrect installation may result in product damage or body injury.

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage,

please contact us.

Must Check Before Getting Started

Installation Tools (Not Included)

Band

Tape

Socket

Wrench

ScrewdriverPencil Electrodrill

Stud

Finder

HammerAwl Wood

Drill Bit

Masonry

Drill Bit

Wood Stud Installation Concrete Installation

1/2"

(13mm)

3/8"

(10mm)

7/32"

(5.5mm)

MAX:400mm/16"

MAX:

400mm/16"

Min. 8"

(203mm)

Solid concrete wall

CAUTION: DO NOT install into drywall alone.

Max:

(30KG)

66LBS

Bubble Level ×1

INSTALLATION INSTRUCTION

Nuts Bolts

6B 6C

Hardware (Wall /Product)

Lag Bolts 5/16 x 2½ in

x2 x1

Open-end wrench

Philips Screws

M6 x 15mm

M6 x 30mm

Philips Screws

M4 x 12mm

M4 x 30mm

Washers

Ø6mm

M4-5-6

Spacers

L10mm

x4 x4x4

Philips Screws

M8 x 25mm

M8 x 45mm

x4 x8 x4

Spacers

L5mm

TV Screws / Washers

M-A M-B M-C M-D M-E M-F

Measure and note the width and the height

of the square or rectangle formed from the

VESA holes pattern .

Step 2 Mesure your TV Pattern

2M2M

100mm 4in.

130mm 5 1/8in.

200mm 8in.

300mm 11 3/4in

340mm 13 3/4in.

400mm 16in.

Step 1-1 Select TV screw diameter

Thread screws by hand into the threaded holes on the back of your TV to select which screw

diameter fits your TV.

M6M4 M8

Correct Correct

Too Long

Too Short

Step 1-2 Select TV screw length

When attaching brackets to the flat screen, be careful not to over tighten screws and

be sure that screws do not bottom out in the mounting holes.

Step 3-1 Select TV Plate Configuration

Select the configuration A , B , C, D, or E to use based on the measurement from Step 2.

For VESA:

300x300mm, 400x400mm

For VESA:

400x300mm

For VESA:

100x100mm, 130x130mm,200x100mm, 200x200mm

200 mm

100 mm

130 mm

200 mm

100 mm

130 mm

VESA

(WxH) Configuration VESA

(WxH) Configuration

100mm x 100mm A 300mm x 200mm C

130mm x 130mm A 300mm x 300mm E

200mm x 100mm A 400mm x 200mm C

200mm x 200mm A 400mm x 300mm D

200mm x 300mm B 400mm x 400mm E

200mm x 400mm B

For VESA:

400x200mm, 300x200mm

For VESA:

200x300mm,

200x400mm

200 mm

400 mm

300 mm

200 mm

400 mm

300 mm

400 mm

300 mm

400 mm

300 mm

Step 3-2 Assemble TV Plate and Extenders

If your TV hole pattern is greater than 200x200mm, attach extenders [3A] and [3B] to TV plate

[02] using Nut [4A] and Bolt [4B].

M-A

Use the shorter screws

M-B

M-C

M-E

Not for M8 screws

Use the longer screws

Not for M8 screws

M-FM-D

(b) For Round Back / Extra Space

6A 6B

M-A

M-B

M-C

M-E

Top of TV

Step 3-3 Attach the TV Plate

(a) For Flat Back

Min. Wood Stud Size:

nominal 2”(51mm)

actual 1 1/2”(38mm)

Min. Wood Stud Size:

nominal 4”(102mm)

actual 3 1/2”(89mm)

<16mm(5/8")

Drywall with wood studs

No!

Wrench

Allen key

Warm Tips

You could also refer to the Video Guide about installation on our product page.

If you have any questions, please feel free to contact us via Amazon.

Step 4A Wall plate installation (Wood Stud)

A-1

A-2

Locate your studs. Verify and mark

the center of the stud by finding the

stud edges using an awl, a thin nail,

or an edge-to-edge stud finder.

Position the upper arm at your desired

height and line up the holes with your stud

center line. Level the wall plate and mark the

pilot hole locations x2.

A-3

Lift and hang TV assembly onto arm and wall plate.

Secure the TV plate to the

arm and wall plate with the

removed screws and

washers from the previous

step.

Cable Management

Product Dimensions:

5-1

5-2

5-3

Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.

IMPORTANT:

Pilot holes must be drilled to a depth

of 2 3/4 in (70 mm). Be sure to drill into the center of the stud.

7/32 in

Ø5.5 mm

A-4 01 A

Install wall plate using lag bolts

with Socket Wrench, NO Electrodrill.

Tighten the lag bolts until they are

pulled firmly against the wall plate

Position the wall plate at

your desired height , level

the wall plate and mark the

pilot hole locations x2.

B-1

Step 4B Wall plate installation (concrete or brick)

Step 5 Lift and Hang TV with Brackets onto Wall Bracket

Install wall plate using lag

bolts and anchors (not

included) with Socket

Wrench, NO Electrodrill.

Tighten the lag bolts until

they are pulled firmly against

the wall plate . Tighten the

lag bolts until they are

pulled firmly against the wall

plate

B-2

Drill pilot holes

2.75in 70 mm

Ø 10 mm

3/8in

Remove 2 preassembled screws and washers before

hang TV on to the wall bracket, and save them for

using to next step.

B-3

No!

2.75in (70 mm)

Level

directly to you.

Concrete wall anchor 2pcs (NOT INCLUDED)

Ø10*61mm

Attach the

wall plate

covers

Push

Attach the

wall plate

covers

Push

STEP 6 Adjust Gas Spring Tension

For proper functioning of this mount, You might need to adjust tension in upper arm depending on

different weight of TV.

Attention: The lower nut

will turn when the bolt is

adjusted, it’s naturalDO NOT

stop it turning.

Level

(Tilting Adjustment)

-15°

+5°

Adjustments

Loosen the screws Level the TV

± 3°

(Leveling) Leveling adjustment (-3°/+3°)

If needed, TV can be leveled ±3 degrees via adjusting the 2 screws with

the open end wrench.

Tighten the

screws

180 °

230mm/9.1"

MAX285mm/11.2”

MIN244mm/9.6” 225mm/8.9"

225mm/8.9"

200mm/7.9"

100mm/3.9"

200mm/7.9"

100mm/3.9"

161mm/6.3"

92mm/3.6"

MAX307mm/12.1”

MIN60mm/2.4”

247mm/9.7"

180 °180 °

+ 5.5°

-15.2°

- 3°/+ 3°

400 mm/16”

300 mm/12”

push the

cables into

Through the cables

36mm/1.42" 8mm/0.31"

Ø8.5mm/0.33"

8.5mm/0.33"

120mm/4.73"

126mm/

4.97"

Remove the cover to

put the cables into if

necessary

                             

     (AT LEAST)

As for how many circles the screw should be turned, refer to below diagram.

          

IMPORTANT NOTICE:

The gas spring is

pre-set to minimum

tension. Once TV is

hanged on, hold TV

with both hands and

DO NOT let go

suddenly or

immediately. instead,

leave TV in a slow &

gentle way while

observing whether

the arms will fall

down wildly.

Situation 1: Arm falls down

Upper Arm with TV falls down and fails to stay where intended.

Solution: Turn the inside screw clockwise(“+”direction) to

increase gas spring tension till the arm can stay as intended.

Situation 2: Arm rises up

Upper Arm with TV rises up and fails to stay where intended.

Solution: Turn the inside screw counterclockwise(“-”direction) to

decrease gas spring tension till the arm can stay as intended.

(Tilting)

Tilting Angle Adjustment (+5° / -15°)

Loosen 2 tilting bolts, pull TV to your desired

angle, then fasten tilting nuts with open-end

wrench.

MOUNTUP MU0037 User manual

MOUNTUP MU0037 User manual

MOUNTUP MU0037 User manual

Related papers

Other documents