MOUNTUP MU0028-B User manual

Brand
MOUNTUP
Model
MU0028-B
Type
User manual

MOUNTUP MU0028-B is a versatile TV mount designed for safe and convenient TV viewing. It supports TVs ranging in size from 23 to 55 inches and weighing up to 100 pounds, making it suitable for most modern TVs. The mount features a sturdy construction with a solid steel frame and durable hardware, ensuring可靠性 and longevity.

One of the key features of the MOUNTUP MU0028-B is its full-motion design, which allows for a wide range of adjustments to optimize your viewing experience. It offers smooth tilting, swiveling, and extending movements, providing you with the flexibility to find the perfect angle and position for your TV. The mount can be tilted up to 5 degrees forward or 13 degrees backward to reduce glare or improve viewing comfort. Additionally, it can be swiveled up to 45 degrees left or right, allowing you to adjust the TV's orientation without straining your neck.

MOUNTUP MU0028-B is a versatile TV mount designed for safe and convenient TV viewing. It supports TVs ranging in size from 23 to 55 inches and weighing up to 100 pounds, making it suitable for most modern TVs. The mount features a sturdy construction with a solid steel frame and durable hardware, ensuring可靠性 and longevity.

One of the key features of the MOUNTUP MU0028-B is its full-motion design, which allows for a wide range of adjustments to optimize your viewing experience. It offers smooth tilting, swiveling, and extending movements, providing you with the flexibility to find the perfect angle and position for your TV. The mount can be tilted up to 5 degrees forward or 13 degrees backward to reduce glare or improve viewing comfort. Additionally, it can be swiveled up to 45 degrees left or right, allowing you to adjust the TV's orientation without straining your neck.

Step 1-1
Select TV screw diameter Step 2A Wall plate installation (wood stud)
Thread screws by hand into the threaded holes on the back of your TV to select which screw
diameter fits your TV.
Hardware Wall /Product)
Lag Bolts ST8x65mm
x4 x1
BA
Open-end wrench
Hardware Included
M6M4 M8
Step 1-2 Select TV screw length
Correct Correct
Too Long
Too Short
Step 1-3
Attach the bracket
CAUTION: Ensure bracket is securely fastened before moving on to the next step.
Philips Screws
M6 x 15mm
M6 x 30mm
Philips Screws
M4 x 12mm
M4 x 30mm
Washers
Ø6mm
M4-5-6
Spacers
L10mm
x4
x4 x4x4
Philips Screws
M8 x 25mm
M8 x 45mm
x4
x4 x8 x4
Spacers
L5mm
x8
TV Screws / Washers
M-A M-B M-C M-D M-E M-F
Top of TV
Top of TV
Velcro cable ties X5 Bubble level X1 Mounting template X1
V6
Safety Caution
Must Check Before Getting Started
Installation Tools (Not Included)
Band
Tape
2M
Socket
Wrench
ScrewdriverPencil Electrodrill
Stud
Finder
HammerAwl Wood
Drill Bit
Masonry
Drill Bit
Wood Stud Installation Concrete Installation
1/2"
(13mm)
3/8"
(10mm)
7/32"
(5.5mm)
MAX:600mm/24"
MAX:
400mm/16"
Max:
(45.5KG)
100LBS
(a) For Flat Back
(b) For Round Back / Extra Space
No!
No!
When attaching brackets to the flat screen, be careful not to over tighten screws and
be sure that screws do not bottom out in the mounting holes.
Arm and Wall Plate
Brackets
Arm Extensions
01 x1
03 x2
Front Support
02 x1
04 x2
04
M-E
Not for M8 screws
M-A
Use the shorter screws
M-B
M-C
04
M-E
M-D
M-F
Not for M8 screws
M-A
Use the longer screws
M-B
M-C
Wrench
05 x1
Side Cover
06 x2
Front Cover
07 x1
Min. 8"
Min. Wood Stud Size:
nominal 2”(51mm) actual 1 1/2”(38mm)
Min. Wood Stud Size:
nominal 4”(102mm) actual 3 1/2”(89mm)
(203mm)
Solid concrete wall
CAUTION: DO NOT install into drywall alone.
<16mm(5/8")
Drywall with wood studs
16"(406mm)
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the installation, assembly
or use of this product, please contact us.
● This product is designed for use in wood stud or solid concrete wall.
- DO NOT install into drywall alone.
● The wall must be capable of supporting five times the weight of the TV and mount combined.
● Incorrect installation may result in product damage or body injury.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage,
please contact us.
INSTALLATION INSTRUCTION
Max:600x400mm /24x16"
Min:150x100mm/6x4"
MU-680C-A-DY
Max:
(45.5KG)
100LBS
Locate your studs. Verify and mark the
center of the studs by finding the stud
edges using an awl, a thin nail, and an
edge-to-edge stud finder.
A-3
A-2
A-1
7/32 in
Ø5.5 mm
2.75in (70 mm)
IMPORTANT:
Pilot holes must be drilled
to a depth of 2 3/4 in (70 mm). Be sure to drill
into the center of the stud.
Position the mounting template
at your desired height and line up
the holes with your stud center line.
Level the mounting template and
mark the pilot hole locations.
Max 406mm (16”)
Mounting template
Bubble Level
V2
Drill pilot holes using a 7/32 in.
(5.5 mm) diameter drill bit.
Warm Tips
You could also refer to the Video Guide about installation on our product page.
If you have any questions, please feel free to contact us via Amazon.
2
1
5
4
3
Loosen
Tighten
± 3°
Step 3 Install front support and extensions
Step 2B Wall plate installation (concrete)
01 A
01
Install wall plate using lag bolts and anchor (not included) with Socket
Wrench, NO Electrodrill. Tighten the lag bolts until they are pulled firmly
against the wall plate
A
05
Use the included wrench when have not
socket wrench in hand.
05
Drill pilot
holes
2.75in 70 mm
Ø 10 mm
Ø 10 mm
3/8in
B-2
B-1
B-3
Position the mounting template
at your desired height , level the
mounting template and mark the
pilot hole locations x4.
No!
2
To prevent the TV falling
down, the Arrow Must
Keep UP at this step!! UP
V2
Mounting template
Bubble Level
01
Contact us to have
these additional pieces
shipped directly to you.
Concrete wall anchor 4pcs (NOT INCLUDED)
Ø10*61mm
A
A
A-4
To prevent the TV falling down, the
Arrow Must Keep UP at this step!!
No!
01 A
01
Install wall plate using lag bolts with Socket Wrench, NO Electrodrill. Tighten the
lag bolts until they are pulled firmly against the wall plate
A
2
01
UP
05
Use the included wrench when have not socket wrench in hand.
05
Adjustments
3-2 P1
P2
Hang 02 onto 01 and using a screwdriver to secure with pre-assembled screws
and washer .
Step 4 Hang TV with brackets onto the arm extensions
TV leveling adjustment (-3°/+3°)
-13°
+5°
Tilting Adjustment
B
Loosen
Tighten
(Tilting)
Tilting Angle Adjustment (+5° / -13°)
Loosen 2 tilting bolts, pull TV to your
desired angle, then fasten tilting nuts with
open-end wrench.
02 01
3-1
2. Remove the
pre-assembled screws x4
3. Insert the arm extension
Assemble the side covers
and the arm extensions with
the preassembled screws
Install the extensions to front support with the pre-assembled screws.
P1 P2
Secure TV with brackets
against the wall plate
with the pre-assembled
screws [S]
04
01
S3
[S3]
04
04
01
S3
±3°
03 02
Back view
1. Loosen a little
[02] [03]
02 03
[03]
06
07
Fasten the all 8 screws.
Attach the front cover to
the front support
2. Push
1. Hang
Step 3 Install front support and extensions Product dimensions
MAX:
400mm/16"
MIN:
100mm/4"
Φ
9mm/0.4"
MAX:600mm/24"
MIN:150mm/6"
162mm
/6.4"
130mm
5.1"
34mm/1.3"
433mm/17"
406mm/16"
305mm/12"
203mm/8"
330mm/13"
57mm/2.2"
77mm/3" ~ 407mm/16"
+5°
-13°
P1 P2
Loosen 2 leveling bolts on the rear of TV plate with the open- end
wrench , adjust to level, and retighten to secure.
B
±45°
±3°
76
8
11
10
9
  • Page 1 1
  • Page 2 2

MOUNTUP MU0028-B User manual

Brand
MOUNTUP
Model
MU0028-B
Type
User manual

MOUNTUP MU0028-B is a versatile TV mount designed for safe and convenient TV viewing. It supports TVs ranging in size from 23 to 55 inches and weighing up to 100 pounds, making it suitable for most modern TVs. The mount features a sturdy construction with a solid steel frame and durable hardware, ensuring可靠性 and longevity.

One of the key features of the MOUNTUP MU0028-B is its full-motion design, which allows for a wide range of adjustments to optimize your viewing experience. It offers smooth tilting, swiveling, and extending movements, providing you with the flexibility to find the perfect angle and position for your TV. The mount can be tilted up to 5 degrees forward or 13 degrees backward to reduce glare or improve viewing comfort. Additionally, it can be swiveled up to 45 degrees left or right, allowing you to adjust the TV's orientation without straining your neck.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents