WALI 1342LM Installation guide

WALI
Brand
WALI
Model
1342LM
Category
Flat panel wall mounts
Type
Installation guide
1342LM
WARNING
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. This product is designed to be installed on wood stud walls, solid concrete walls or brick
walls. Do not mount on drywall alone. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
TV Wall Mount
75x75\100x100
100x200\200x200
M4x10 Bolt
e (x8)
Adapter
d (x2)
VESA Plate
b (x1)
Adapter
c (x2)
Wall Plate &
Articulating Arms
a (x1)
Bolt Cover
o (x2)
M4x6 Bolt
n (x2)
Cable Tie
t (x3)
M4 Nut
f (x8)
Lag Bolt Washer
q (x2)
Wrench
p (x1)
Concrete Anchor
s (x2)
Lag Bolt
r (x2)
M8x20 Bolt
k (x4)
INSTALLATION MANUAL
1-844-SATTLER (18447288537)
[email protected]
www.walielectric.com
(15kg/33lbs)
RATED
MAX 39”
TIPOVER WARNING
● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.
Supplied Parts List
Install the Wall Plate to the Wall
1
Option A : Brick Mount Option B : Wood Mount
a
r
65mm
4mm
60m m
65m m
10m m
q
a
r
qs
M4x14 Bolt
h (x4)
M5x14 Bolt
i (x4)
M6x14 Bolt
j (x4)
D5 Washer
l (x4)
D8 Washer
m (x4)
3 4
5 6
7 8
2 0mm
200mm
100mm
c
e
f
c
d
Thi s w ay u p!
200mm
170mm
160mm
200mm
c
e
f
c
c
cd
b
For VESA 200x200mm Mounting Holes
Attach VESA Plate to the Mounting Hole of TV
2
For VESA 75x75mm and 100x100mm Mounting Holes
For VESA 100x200mm Mounting Holes
For VESA 200x200mm Mounting Holes
cb
c
c
c
b
d
d
d
d
d
e
e
dc
c
c
d
d
c
h k
f
f
lm(if necessary)
to
h k
to
lm(if necessary)
Attach the VESA plate to the socket on the Articulating Arm and ensure the stability.
Loosen the nut (if needed) as the image shown with Wrench . Fix the Bolt Cover onto the front of the mount part.
Tighten the VESA plate using M4x6 Bolt .
Notice: Please do not rotate the monitor before you tighten the bolts.
3.1
3.2
ba
b
b
b
n
n
a
p
p
t
t
o
o
This way up!
Ignore this step if you could adjust the tilt angle smoothly.
Manage wires with included Cable Ties .
360°
± 90°
± 90°
Manually swivel, tilt, and rotate the monitor for the best viewing angle.
For Flat Back TV
h to
j
b
This way up!
  • Page 1 1
  • Page 2 2

WALI 1342LM Installation guide

WALI
Brand
WALI
Model
1342LM
Category
Flat panel wall mounts
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents