Noble House 300209 Operating instructions

Brand
Noble House
Model
300209
Type
Operating instructions

This manual is also suitable for

Label Picture Description QTY
A Backrest Panel 1
B Chair Seat Panel 1
C
Right Leg with Arm
(with pre-attached
Levellers)
1
D
Left Leg with Arm(with
pre-attached Levellers)
1
Assembly Instructions
Caution : You must read this before you proceed
CHAIR
Parts list
CAUTION : This chair is NOT a TOY.
Keep your child / children at bay during the assembly process.
Page 1 OF 6
Label Picture Description QTY
①
Bolt(M8*35mm) 9
②
Washer(8mm) 9
③
Spring Washer(8mm) 9
④
Nut(8mm) 9
⑤
Rubber Cap 9
⑥
Spanner 1
⑦
Screwdriver 1
Hardware
Before beginning assembly:
Assembly Preparation
Page 2 OF 6
Step 1
This Chair has multiple parts and may require up to some 30 minutes
to assemble.
To give you an overview of the Chair parts, the above picture is to help
you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with
the parts and steps before assembly.
Unpack and place all parts on a clean, soft surface.
Overview
Backrest Panel(A)
Right Leg with Arm
(with pre-attached
Levellers)
（
C)
Left Leg with Arm
(with pre-
attached
FRONT FACING
Chair Seat Panel
(B)
Page 3 OF 6
Step 2
Step 3
Place the Left Leg with Arm (D) on the floor and lock the mounting positions with
four bolts(①) by using Screwdriver(⑥)
DO NOT fully tighten at this stage.
Step 3.1 Attach Backrest Panel (A) to the Left Leg with Arm (with pre-attached
Levellers)(D) using Bolt(①),Washer(②) Spring Washers(③) and Nuts(④) with
Screwdriver(⑦)
Step 3.2 Then attach Chair Seat Panel(B) to Left Leg with Arm (with pre-
attached Levellers)(D) using Bolt(①),Washer(②) Spring Washers(③) and
Nuts(④) with Screwdriver(⑦)
DO NOT fully tighten at this stage.
⑦
③
②
①
Page 4 OF 6
Step 4
Step 5
Repeat the same assembly process for the Right Leg with Arm (with pre-
attached Levellers)(C).
DO NOT fully tighten at this stage.
Stand the chair rightside up.
Now, fully and securely, tighten all nuts, at all joints.
Add Rubber Caps( ⑤ ) on all bolt ends to protect skin or clothing from
getting snagged.
Adjust the Pre-attached levellers at the bottoms of the chair legs until the chair is
level with the ground.
Your chair is ready for use.
Caution: This Chair can only be used on a flat, level surface.
Adjust height
for balance
Adjust low for
balance
⑦
④
③
②
①
Page 5 OF 6
Page 6 OF 6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Noble House 300209 Operating instructions

Brand
Noble House
Model
300209
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents