Noble House 2794 Operating instructions

Brand
Noble House
Model
2794
Type
Operating instructions

This manual is also suitable for

1 OF 4
Caution : You must read this before you proceed.
ROUND PHENIX TABLE
CAUTION : This table is NOT a TOY.
Keep your child / children at bay during the assembly process.
Assembly Preparation
Before Beginning Assembly:
Assembly Instructions
2 OF 4
NO. Picture QTY
A 1
B 4
C 1
8
8
8
8
8
8
J 1
Washer(8mm)
Table Top
Table Leg with pre-attached Levellers
Support Ring
Spring Washer(8mm)
Hex Bolt(25mm)
Assembly Step
I
Parts list
Description
Loosely affix the Support Ring(C) to Table Leg with pre-attached Levellers (B)
using Washers,Spring Washers,and Hex Bolts(H), with the Spanner(J).
DO NOT OVERTIGHTEN.
Unpack and place all parts on a clean, soft surface.
Hard ware
H
Washer(8mm)
Spring Washer(8mm)
Hex Bolt(30mm)
Spanner
H
J
3 OF 4
Repeat Step 2 to attach the remaining 3 Legs(B) to the Support Ring(C)
DO NOT OVERTIGHTEN.
Lay the Table Top(A), facedown, onto a flat, soft, clean surface.
Attach the Table Legs(B) to the the Table Top(A) using Washers, Spring
Washers, and Nuts(I) with the Spanner(J).
Tighten all these Nuts and Washers in a sequential manner.
DO NOT OVERTIGHTEN.
Stand the table rightside up.
Now tighten up all screws.
Adjust the pre-attached Levellers in the legs to attain evenness.
Your table is now ready for use.
H
I
4 OF 4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Noble House 2794 Operating instructions

Brand
Noble House
Model
2794
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents