Noble House 297261 User guide

Brand
Noble House
Model
297261
Type
User guide
Caution : You must read this before you proceed.
LAUGHLIN KD LOVESEAT FOR SET
Assembly instructions
1 of 5
CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the
process of assembly.
1 of 5
Parts list
Assembly Preparation
Before Beginning Assembly:
2 of 5
NO. Picture QTY
A1
B1
C1
D1
E9
9
9
9
F
Nuts(8mm)
Studs(8*30mm)
Description
Chair seat Panel
Backrest Panel
Left Arm with pre-attached
Levellers.
Spring Washers(8mm)
Right Arm with pre-attached
Levellers
Washers(8mm)
Hard ware
2 of 5
G9
H1
I1
Spanner
Nut Cap
Unpack and place all parts on a clean soft surface.
Assembly Step
Screwdriver
3 of 5
Place the Right Arm flat (C) on the ground.
Attach Studs (E) with Screwdriver (I) to the contact points on the Right arm.
Place Chair Seat Panel (B) and Backrest Panel(A) to the Right arm (C)
through the Studs (E).
Align the nut hole and attached with Washers and Spring Washers and Nuts
(F) with the Spanner(H).
Put on the Nut caps(G)
DO NOT OVERTIGHTEN, yet.
3 of 5
Attach Studs (E) with Screwdriver (I) to the contact points on the Left arm (D)
Place Chair Seat Panel (B) and Backrest Panel(A) to the Left arm (D) through
the Studs (E).
4 of 5
Turn the Chair rightside.
Adjust the pre-installed feet Levellers until the chair is level with the ground.
Then, proceed to tighten up all screws and bolts.
Your Chair is ready for use.
()
Align the nut hole and attached with Spring Washers and Washers and Nuts
(F) with the Spanner(H).
Put on the Nut caps(G)
DO NOT OVERTIGHTEN, yet.
4 of 5
5 OF 5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Noble House 297261 User guide

Brand
Noble House
Model
297261
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents