Noble House 301073 Operating instructions

Brand
Noble House
Model
301073
Type
Operating instructions

This manual is also suitable for

Label Picture Description QTY
A Backrest Panel 1
B Seat Panel 1
Assembly Instructions
Caution : You must read this before you proceed
Dining Chair
CAUTION : This chair is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Noble house Home Furnishings LLC
Page 1 OF 6
C
Left Arm Leg with Pre-
attached
Levellers
1
D
Right Arm Leg with
Pre-attached
Levellers
1
E Seat Cushion 1
Label Picture Description QTY
①
Bolts(M8*22mm) 5
②
Washers(8mm) 5
③
Spring
Washers(8mm)
5
④
Bolts(M6*22mm) 5
⑤
Washers(6mm) 5
⑥
Spring
Washers(6mm)
5
⑦
Allen Key(8mm) 1
⑧
Allen Key(6mm) 1
Noble house Home Furnishings LLC
Page 2 OF 6
Overview
Before
Beginning
Assembly:
This chair has multiple parts and may require up to 30 minutes to
assemble.
To give you an overview of the chair parts, the above picture is to
help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself
with the parts and steps before assembly.
FRONT FACING
Backrest Panel(A)
Seat Panal(B)
Pre-attached
Right Arm Leg with
Pre-attached
Seat Cushion(E)
Noble house Home Furnishings LLC
Page 3 OF 6
Step 1
Step 2
Step 3
Turn the Left Arm Leg with Pre-attached Levellers(C) upside down
on to a soft surface.
Attach Backrest Panel (A) to the Left Arm Leg with Pre-attached
Levellers(C) using bolts(④), spring washers(⑥) and washers(⑤)
with allen key(⑧).
Do not fully tighten at this stage.
Unpack and place all parts on a clean soft surface.
Then attach Chair Seat Panel(B) to Left Arm Leg with Pre-attached
Levellers(C) using bolts(①), spring washers(③) and washers(②)
with allen key(⑦).
Do not fully tighten at this stage.
A
C
⑦
C
A
B
Noble house Home Furnishings LLC
Page 4 OF 6
Step 4
Step 5
Stand the chair rightside up.
Place the Seat Cushion(E) on the Chair.
Adjust the Pre-attached levellers at the bottoms of the chair legs
until the chair is level with the ground.
Your chair is ready for using.
Caution: This Chair can only be used on a flat, level surface.
Repeat the same assembly process for the Right Arm Leg with Pre-
attached Levellers(D).
DO NOT fully tighten at this stage.
⑦
Noble house Home Furnishings LLC
Page 5 OF 6
Noble house Home Furnishings LLC
Page 6 OF 6
Label Picture Description QTY
A Table Top 1
B
Table Top Extension
Leaf
1
C
Inner Table Leg with
Pre-attached Leveller
2
D
Outer Table Leg with
Pre-attached Leveller
2
Assembly Instructions
Caution : You must read this before you proceed
Extension Table
CAUTION : This table is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Noble house Home Furnishings LLC
Page 1 OF 7
Label Picture Description QTY
① Bolt(M6*22mm) 22
② Washer(6mm) 31
③ Spring Washer(6mm) 27
④ Bolt(M6*80mm) 3
⑤ Nut(6mm) 3
⑥ Spanner 2
Before
Beginn
ing
Assem
bly:
Noble house Home Furnishings LLC
Page 2 OF 7
Step 1
This table has multiple parts and may require up to 30 minutes to
assemble.
To give you an overview of the table parts, the above picture is to
help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with
the parts and steps before assembly.
Unpack and place all parts on a clean soft surface.
Overview
FRONT FACING
Table Top(A)
Table Top Extension Leaf
Inner Table Leg
with Pre
-
attached
Leveller(C)
Outer Table
Leg with Pre
-
attached
Leveller (D)
Noble house Home Furnishings LLC
Page 3 OF 7
Step 2
Step 3
Fix the Inner Table Leg with Pre-attached Leveller(C) and Outer
Table Leg with Pre-attached Leveller(D) with bolts(④), washers(②),
spring washers(③) and nuts(⑤) by spanner(⑥).
Do not over tighten.
Fix the bolts(①), washers(②), spring washers(③) to the unit by
spanner(⑥).
Do not over tighten.
Repeat the same assembly process for the other Inner Table Legwith
Pre-attached Leveller(C) and Outer Table Leg with Pre-
attachedLeveller(D).
DO NOT fully tighten at this stage.
C
D
⑥
② ③ ⑤
②
④
② ③ ①
②③①
C
D
⑥
② ③ ⑤
②
④
② ③ ①
②③①
Noble house Home Furnishings LLC
Page 4 OF 7
Step 4
Step 5
Turn the table upside down on to a soft surface that does not scratch
the tabletop.
Attach Inner Table Leg with Pre-attached Leveller(C) and Outer
Table Leg with Pre-attached Leveller(D) to the mounting position on
the table top(A) with bolts(①), spring washers(③) and washers(②)
by spanner(⑥).
Do not over tighten.
Caution: you may need 2 adults to turn the table top A upside
down.
Turn the Table rightside up.
Adjust the pre-installed Leveller until the Table is level with the
ground.
Then, proceed to tighten all Bolts and Nuts.
Your table is ready for use.
Caution: This Table can only be used on a flat, level surface.
A(Table Top)
Table Leg
⑥
①
③
②
Adjust height
for balance
Adjust low
for balance
Noble house Home Furnishings LLC
Page 5 OF 7
Step6
Step 7
To shorten the Table, pull the table top apart, take Table Top
Extension Leaf(B) away, then towards the table top.
Your table is ready to use.
To expand the Table, pull the table top apart, place Table Top
Extension Leaf (B) into the middle leaf slot.
Adjust the direction/angle to tightly fit into the housing in the Table
Top.
B
B
Noble house Home Furnishings LLC
Page 6 OF 7
Noble house Home Furnishings LLC
Page 7 OF 7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Noble House 301073 Operating instructions

Brand
Noble House
Model
301073
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents