Firesense 62109 User manual

Brand
Firesense
Model
62109
Type
User manual
OUTDOOR KD Chair
ITEM # 62109
1
Owner’s Manual
· Read instructions,cover to cover-
· Have 2 adults on hand for assembly-
· Do not assemble on flooring or carpet-
· Assemble on a clean non-marring surface (packing foam)-
· Save all packaging until finished-
PACKAGE CONTENTS
2
A
B
C
D
PART
DESCRIPTION
QUANTITY
Backrest panel
Left Arm with pre-attached leg levellers
Chair seat panel
Right Arm with pre-attached leg levellers
HARDWARE CONTENTS
E
F
Wrench
Qty. 2
Bolt (6*55mm)
Nut (M6)
Washer(M6)
Spring Washer(M6)
Qty. 4 of each
Bolt(6*55),Nut(M6),Washer(M6),Spring Washer(M6)
Wrench
G
Bolt(M6*35),Washer(M6)
Bolt (6*35mm)
Qty.
H
Seat cushion
Washer(M6)
4 of each
3
ASSEMBLY INSTRUCTION
Hardware Used
Hardware Used
x 2
A
D
C
1.Place the Right Arm flat on the ground.
Attach the Chair Seat Panel (D) to the Right arm (C) using
Bolts(E) , Nuts,Spring Washers and Washers with
the Wrench(F).Attach the Backrest Panel(A) to the Right
arm (C) using Bolts(G)
with the Wrench(F).
DO NOT OVERTIGHTEN.
E
Bolt (6*55mm)
Nut (M6)
Washer(M6)
Spring Washer(M6)
F
G
x 2
Wrench x 2
E
Bolt (6*35mm)
G
B
E
G
2.Attach the Left arm (B) to the Chair Seat Panel (D) using
Bolts(E) , Nuts, Spring Washers and Washers with
the Wrench(F). Attach the Left arm (B) to the Backrest
Panel(A) using Bolts(G) with the Wrench(F).
DO NOT OVERTIGHTEN
x 2
E
Bolt (6*55mm)
Nut (M6)
Washer(M6)
Spring Washer(M6)
F
G
x 2
Wrench x 2
Bolt (6*35mm)
Washer(M6)
Washer(M6)
4
ASSEMBLY INSTRUCTION
H
3.Turn the Chair rightside. Adjust the pre-installed
Levellers until the chair is level with the ground , tighten
all screws and bolts.
4.TO put the Seat cushion on.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Firesense 62109 User manual

Brand
Firesense
Model
62109
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents