Otsein-Hoover LB LTOH46 C User manual

LB LTOH46 C
Otsein-Hoover
Brand
Otsein-Hoover
Model
LB LTOH46 C
Category
Washing machines
Type
User manual

This manual is also suitable for

31 32
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
This Instruction Manual
contains everything you need to
know about the everyday
running of your machine. Keep
it for future reference.
An Installation and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The ma-
nual also contains information
about possible working
problems, advice about the
wash load, an explanation of
label symbols and hints about
how to remove stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
7.- WHEEL TROLLEY (Mod. LTOH 66 C)
INDEX
GUARANTEE .............................................................................
33
TECHNICAL DATA .......................................................................
34
OPENING THE LID – LOADING ................................................
35
DETERGENT DISPENSER ........................................................
36
VARIABLE CAPACITY
(Mod. LTOH 46 C - Mod. LTOH 66 C) ..........................................
37
PROGRAMME SELECTION .......................................................
37
CONTROL DESCRIPTION
Mod. LTOH 44 - LTOH 54 .............................................................
38
Mod. LTOH 46 C - LTOH 66 C .....................................................
40
TABLE OF PROGRAMMES .......................................................
43
pág.
EN
✆ 902.100.150
When contacting a OTSEIN/HOOVER or one of its Technical
Assistance Centre always refer to the model (see control panel) and
the registration and series numbers which are indicated at the bottom
of the machine under the lower panel or on the warranty certificate.
That is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
GUARANTEE
1.
The appliance comes with a guarantee certificate.
2.
Complete part B and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
3.
Do not forget to send part A of the Guarantee
Certificate to be validated within 15 days of purchase.
SERVICE
33 34
B
A
4,5
230
280
500
30
1.850
2.300
10
0,05 min.
0,8 max.
400
74
1,21
C
4,5
230
280
500
30
1.850
2.300
10
0,05 min.
0,8 max.
400
74
1,21
C
LTOH 44
LTOH 46 C
TECHNICAL DATA
Load capacity .........................................................
kg.
Voltage ......................................................................
V.
Wash motor power rating ........................................
W.
Spin motor power rating ..........................................
W.
Electropump power rating .......................................
W.
Heating element power rating .................................
W.
Max. power input .....................................................
W.
Fuse .........................................................................
A.
Water pressure .....................................................
MPa
Spin speed ...............................................
r.p.m./min
Water consumption (60º C programme) ..................
lit.
Energy consumption (60º C programme) ............
kWh
Energy efficiency rating ................................................
4,5
230
360
560
30
1.850
2.300
10
0,05 min.
0,8 max.
500
74
1,21
C
LTOH 54
4,5
230
360
560
30
1.850
2.300
10
0,05 min.
0,8 max.
600
74
1,21
C
LTOH 66 C
35 36
OPENING THE DRUM
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the first
shutter fits correctly into the slot. Release.
5.
Ensure that both shutters are perfectly aligned and properly
closed.
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE MACHINE
OR LAUNDRY COULD GET DAMAGED.
2 min.
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
FRONT OF THE
WASHING
MACHINE
D
C
FRONT OF THE
WASHING
MACHINE
D
C
FRONT OF THE
WASHING
MACHINE
C
B
D
WASHING
MACHINE LID
A
FRONT OF THE
WASHING
MACHINE
C
D
I
II
MAX.
MAX.
MAX.
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is 60
gm of detergent (for 4,5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The compartment is for bleach. The recommended quantity is 7 cl.
• The compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 5 cl.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
MAXIMUM
(wash)
MAXIMUM
(bleach and scenting agent)
MAXIMUM
(prewash)
RECOMMENDED
CONTROL DESCRIPTION
PROGRAMME SELECTOR KNOB ............................................
SPIN EXCLUSION BUTTON ......................................................
1/2 LOAD BUTTON ....................................................................
COLD WASH BUTTON ..............................................................
ON/OFF PILOT LIGHT ...............................................................
ON/OFF BUTTON ......................................................................
SELECTOR MARK .....................................................................
A
D
E
F
G
H
L
37 38
VARIABLE CAPACITY
(Mod. LTOH 46 C - Mod. LTOH 66 C)
This washing machine automatically adapts the water level to the type and quantity of clothes
to be washed. So it is possible to obtain a «customised» wash, even in terms of energy. This
system reduces water and energy consumption and provides an appreciable reduction in
wash time.
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT
ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
(Mod. LTOH 46 C - Mod. LTOH 66 C)
• Select the wash temperature by means of the corresponding control knob.
• Select the different options available by pressing the corresponding buttons.
LTOH 44
LTOH 54
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
To select the desired wash programme, turn this control until
the selector mark (L) coincides with the programme number
or symbol.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the Start/Stop key. Press again to recommence once the
modification has been completed.
D
. SPIN EXCLUSION BUTTON
This button excludes the spin cycle from the wash programme. This option is
recommended for special fabrics.
E
. 1/2 LOAD BUTTON
The water load for a small wash may be reduced by pressing the 1/2 load
button. This saves water, detergent and electricity. The amount of detergent
used should be reduced in proportion to the load.
IMPORTANT: NEVER PRESS THE HALF LOAD BUTTON WHEN
WASHING PURE NEW WOOL AND VERY DELICATE FABRICS.
F
. COLD WASH BUTTON
When pressed, your washing machine washes with cold water.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
CONTROL DESCRIPTION
PROGRAMME SELECTOR KNOB ............................................
- PROGRAMME STAGE DISPLAY .................................
- TIME REMAINING DISPLAY ........................................
TEMPERATURE SELECTOR KNOB .........................................
SPIN EXCLUSION BUTTON ......................................................
FLOT BUTTON (ANTICREASING) .............................................
ON/OFF PILOT LIGHT ...............................................................
ON/OFF BUTTON ......................................................................
SELECTOR MARK .....................................................................
39
40
PROGRAMAS
MARCHA
PARADA
EXCLUSION
CENTRIFUGADO
MEDIA
CARGA
FRIO
A
f
t
B
D
E
G
H
L
LTOH 46 C
LTOH 66 C
USE OF THE SELECTION CONTROLS
E
. FLOT BUTTON (Anticreasing)
The Flot button only works in programmes (5-6-7-8-9-10) for mixed, synthetic
and very delicate fabrics.
When the button is pressed, the machine stops in the last rinse of these
programmes, leaving the wash soaking with a high water level.
To complete these programmes, spin the wash by pressing the button again to
release it.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
41
42
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
To select the desired wash programme, turn this control until
the selector mark (L) coincides with the programme number
or symbol.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the Start/Stop key. Press again to recommence once the
modification has been completed.
f
. PROGRAMME STAGE DISPLAY
This displays the current programme stage throughout the programme selected.
WASH: STOP WITH WATER IN DRUM:
RINSE: END OF PROGRAMME:
FINAL SPIN:
t
. TIME REMAINING DISPLAY
This displays the Approx. time remaining in minutes to the end of the
programme.
B
. TEMPERATURE SELECTOR KNOB
To select the desired wash temperature, turn this control until
the selector mark (L) coincides with the desired temperature.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark (L).
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
D
. SPIN EXCLUSION BUTTON
This button excludes the spin cycle from the wash programme. This option is
recommended for special fabrics.
PROGRAMAS
TEMPERATURA
ANTI
ARRUGAS
MARCHA
PARADA
EXCLUSION
CENTRIFUGADO
DELICATE SYNTHETICS
Curtains, skirts, blouses, shirts
WOOL
(“Machine washable”)
DELICATE RINSE
GENTLE SPIN
43 44
1
2
*
3
4
MAX.
TEMP.
SEL.
ºC
From cold
to…
40º
From cold
to…
40º
—
—
From cold
to…
60º
From cold
to…
60º
From cold
to…
50º
From cold
to…
40º
—
—
—
From cold
to…
90º
From cold
to…
90º
From cold
to…
60º
From cold
to…
40º
—
—
—
1,5
1
—
—
4,5
4,5
3,5
3,5
—
—
—
FAST BLENDS
Shirts, sheets, baby clothes, whites
FAST SYNTHETICS
Shirts, blouses, fast coloured skirts
MIXED SYNTHETIC
Lightly soiled clothes of all types
FAST WASH PROGRAMME
DELICATE RINSE
GENTLE SPIN
EMPTYING
Emptying only
PRE-WASH, Wash, 3 rinses, final gentle spin.
Wash, 3 rinses, final gentle spin
Wash, 3 rinses, final gentle spin
FAST WASH PROGRAMME. Short wash, 3 rinses,
final gentle spin
3 rinses. Final gentle spin
Rinse. Final gentle spin
Emptying (e.g. after stopping with water in drum)
TABLE OF PROGRAMMES
PROG.
SEL.
I
II
MAX.
LOAD
IN kg.
TYPE OF FABRIC
PROGRAMME FOR
WASHING POWDER
LOAD
Cotton, linen
Cotton, fast blends
Cotton, blends
Cotton
Cotton, linen
WHITE (PRE-WASH)
Sheets, white & fast coloured tablecloths,
serviettes, lingerie
SOILED WHITE
Sheets, white & fast coloured tablecloths,
serviettes, lingerie
FAST COLOURS
Medium soiled coloured clothes
FAST WASH PROGRAMME
Non fast colours, jeans
BLEACH/ WHITENING
Organic stains
VIGOROUS RINSE
VIGOROUS SPIN
NORMAL FABRICS
•
•
•
•
•
•
•
•
•
•
•
•
•
2
2
2
2
—
—
SYNTHETIC FABRICS
Fast blends
Synthetics
(Rayon, acrylics)
Delicate
synthetics
Blends, synthetics,
delicate items
Clothes requiring
no spin
•
•
•
•
•
•
•
•
•
Synthetics
(Rayon, acrylics)
Wool
Blends,
Synthetics,
Delicate items
•
•
•
•
•
HIGHLY DELICATE
FABRICS
1
2
3
4
PRE-WASH, Main wash, 4 rinses, final vigorous spin.
Main wash, 4 rinses, final vigorous spin
Short wash, 4 rinses, final vigorous spin
FAST WASH PROGRAMME. Short wash, 4 rinses,
final vigorous spin
Bleach in pre-wash
4 rinses. Final vigorous spin
Vigorous spin
5
6
7
8
Z
PRE-WASH. Short wash with abundant water, 3
rinses, gentle spin.
Short wash with abundant water, 3 rinses, gentle spin
3 rinses, gentle spin
Gentle spin
144´
128´
88´
72´
46´
42´
8´
91´
76´
64´
56´
29´
12´
2´
42´
31´
21´
4´
NOTES:
1. For highly soiled clothes, it is advisable to
reduce the load to no more than 3 kg.
2. For automatic whitening in programmes 1
and 2, pour bleach into the bleach
drawer .
3. Programmes 1-5-9 have pre-wash.
4. The washing machine is designed to
incorporate fabric softener automatically in
the last rinse of each washing cycle.
5. Mod. LTOH 44 - LTOH 54.In programmes
5-6-7-8-9-10, the washing machine stops with
water in the drum at the end of the rinse cycle
to prevent creasing.
The cycle may be ended in two ways:
- Move the programme selector forward one
step.
- Select programme Z (emptying). In this
case, disconnect the START/STOP key
before making the selection on the control.
6. Programme duration is given AS A
GUIDELINE ONLY. This time may vary either
way depending on the temperature selected,
the amount and type of clothes and the
installation conditions (water temperature,
ambient temperature, mains water pressure,
etc.)
MOD. LTOH 44-LTOH 54-LTOH 46 C-LTOH 66 C
•
•
•
9
10
TEMP.
ºC
90º
90º
60º
40º
—
—
—
60º
60º
50º
40º
—
—
—
40º
40º
—
—
PROG.
SEL.
PROGRAMME STEPS
As a
guideline
Prog.
Time in
min.
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly soiled or are
particularly delicate.
Programme
*
, as per EN standard 60456 (Mod. LTOH 46C-LTOH 66C).
Programme
, as per EN standard 60456 (Mod. LTOH 44-LTOH 54).
5
6
*
7
8
Z
9
10
*
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Otsein-Hoover LB LTOH46 C User manual

LB LTOH46 C
Otsein-Hoover
Brand
Otsein-Hoover
Model
LB LTOH46 C
Category
Washing machines
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents