Otsein-Hoover LB LTD 584 H User manual

Otsein-Hoover
Brand
Otsein-Hoover
Model
LB LTD 584 H
Category
Washing machines
Type
User manual

This manual is also suitable for

27
EN
When contacting a OTSEIN/HOOVER or one of its Technical
Assistance Centre always refer to the model (see control panel) and
the registration and series numbers which are indicated at the bottom
of the machine under the lower panel or on the warranty certificate.
That is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
This Instruction Manual
contains everything you need to
know about the everyday
running of your machine. Keep
it for future reference.
An Installation and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The ma-
nual also contains information
about possible working
problems, advice about the
wash load, an explanation of
label symbols and hints about
how to remove stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
7.- WHEEL TROLLEY (Depending on model)
28
INDEX
GUARANTEE .............................................................................
29
TECHNICAL DATA .......................................................................
30
OPENING THE LID – LOADING ................................................
31
DETERGENT DISPENSER ........................................................
32
PROGRAMME SELECTION .......................................................
33
CONTROL DESCRIPTION ..........................................................
34
TABLE OF PROGRAMMES .......................................................
37
page
29
SERVICE
B
A
GUARANTEE
1.
The appliance comes with a guarantee certificate.
2.
Complete part B and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
3.
Do not forget to send part A of the Guarantee
Certificate to be validated within 15 days of purchase.
30
TECHNICAL DATA
Load capacity ................................................................
kg.
Voltage .............................................................................
V.
Wash motor power rating ...............................................
W.
Spin motor power rating .................................................
W.
Electropump power rating ..............................................
W.
Heating element power rating ........................................
W.
Max. power input ...........................................................
W.
Fuse ................................................................................
A.
Water pressure ...........................................................
MPa
Spin speed ......................................................
r.p.m./min
Water consumption (60º C programme) ........................
lit.
Energy consumption (60º C programme) ..................
kWh
Energy efficiency rating .......................................................
4,5
230
360
560
30
1.950
2.300
10
0,05 min.
0,8 max.
600
65
1,21
C
600 r.p.m.
4,5
230
360
560
30
1.950
2.300
10
0,05 min.
0,8 max.
500
65
1,21
C
500 r.p.m.
31
OPENING THE DRUM
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the
first shutter fits correctly into the slot. Release.
5.
Ensure that both shutters are perfectly aligned and properly
closed.
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE
MACHINE OR LAUNDRY COULD GET DAMAGED.
2 min.
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
A
FRONT OF THE
WASHING MACHINE
C
B
D
WASHING MACHINE
LID
FRONT OF THE
WASHING MACHINE
D
C
FRONT OF THE
WASHING MACHINE
D
C
FRONT OF THE
WASHING MACHINE
C
D
32
I
II
MAX.
MAX.
MAX.
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is
60 gm of detergent (for 4,5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The compartment is for bleach. The recommended quantity is 7 cl.
• The compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 5 cl.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
MAXIMUM
(wash)
MAXIMUM
(bleach and scenting agent)
MAXIMUM
(prewash)
RECOMMENDED
33
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS
NOT ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
If your model offers this function:
• Select the wash temperature by means of the corresponding control knob.
• Select the different options available by pressing the corresponding buttons.
34
A
f
t
B*
D*
G
H
L
CONTROL DESCRIPTION
PROGRAMME SELECTOR KNOB ............................................
- PROGRAMME STAGE DISPLAY .................................
- TIME REMAINING DISPLAY ........................................
TEMPERATURE SELECTOR KNOB .........................................
BUTTONS ...................................................................................
ON/OFF PILOT LIGHT ...............................................................
ON/OFF BUTTON ......................................................................
SELECTOR MARK .....................................................................
35
USE OF THE SELECTION CONTROLS
THE FOLLOWING TABLE SHOWS THE SYMBOLS USED ON THE WASHING
MACHINE AND ALSO INDICATES THEIR FUNCTION. THE SYMBOLS MARKED
WITH (*) ARE ONLY USED ON SOME MODELS.
A
. PROGRAMME SELECTOR KNOB
To select the desired wash programme, turn this control
until the selector mark (L) coincides with the programme
number or symbol.
ALWAYS ROTATE the control in a clockwise direction,
never in an anticlockwise direction. Do not press the “on”
button (H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the Start/Stop key. Press again to recommence once the
modification has been completed.
f
. PROGRAMME STAGE DISPLAY
This displays the current programme stage throughout the programme
selected.
WASH: STOP WITH WATER IN DRUM:
RINSE: END OF PROGRAMME:
FINAL SPIN:
t
. TIME REMAINING DISPLAY
This displays the Approx. time remaining in minutes to the end of the
programme.
Programme duration is given AS A GUIDELINE ONLY. This time may vary
either way depending on the temperature selected, the amount ant type of
clothes and the installation conditions (water temperature, ambient
temperature, mains water pressure, etc.)
*B
. TEMPERATURE SELECTOR KNOB
To select the desired wash temperature, turn this control
until the selector mark (L) coincides with the desired
temperature.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark (L).
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended
for each cycle in the table of programmes.
PROGRAMAS
TEMPERATURA
36
USE OF THE SELECTION CONTROLS
THE FOLLOWING TABLE SHOWS THE SYMBOLS USED ON THE WASHING
MACHINE AND ALSO INDICATES THEIR FUNCTION. THE SYMBOLS MARKED
WITH (*) ARE ONLY USED ON SOME MODELS.
D
. SPIN EXCLUSION BUTTON
This button excludes the spin cycle from the wash programme. This option is
recommended for special fabrics.
D
. 1/2 LOAD BUTTON
The water load for a small wash may be reduced by pressing the 1/2 load
button. This saves water, detergent and electricity. The amount of detergent
used should be reduced in proportion to the load.
IMPORTANT: NEVER PRESS THE HALF LOAD BUTTON WHEN
WASHING PURE NEW WOOL AND VERY DELICATE FABRICS.
*D
. FLOT BUTTON (Anticreasing)
This button works in all programmes except the «29 minute cycle». When it
is pressed, the machine stops on the last rinse, leaving the clothes soaking in
a full drum of water.
To complete the programme and spin the clothes, press the button to release
it.
DO NOT PRESS THIS BUTTON IF THE «VIGOROUS SPIN»
(COTTON) PROGRAMME IS SELECTED.
*D
. COLD WASH BUTTON
When pressed, your washing machine washes with cold water.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
EXCLUSION
CENTRIFUGADO
MEDIA
CARGA
FRIO
ANTI
ARRUGAS
MARCHA
PARADA
37
5
6
7
8
Z
MAX.
TEMP.
SEL.
ºC
•
TEMP.
ºC
TABLE OF PROGRAMMES
HEAVILY SOILED
COLOUREDS
ACRYLICS
WOOL
GENTLE RINSE
GENTLE LAST RINSE
GENTLE SPIN
EMPTY
Drain off water
60º
50º
40º
40º
—
—
—
—
INTENSIVE HEAVILY SOILED
NORMAL
FAST COLOUREDS
DELICATE COLOUREDS
BLEACH/WHITENER
Organic stains
VIGOROUS RINSE
VIGOROUS LAST RINSE
VIGOROUS SPIN
PROG.
SEL.
1
2
3
*
4
I
II
4,5
4,5
4,5
3,5
—
—
—
—
MAX.
LOAD
IN KG
TYPE OF
FABRIC
PROGRAMME
PRODUCTS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
2
2
1
—
—
—
—
•
•
•
•
•
•
•
•
•
•
90º
90º
60º
40º
—
—
—
—
The first programmes in each group are longer and therefore ensure a more efficient wash at the same
temperature. Select the later programmes for lightly soiled or particularly delicate clothes.
Programme , as per standard EN 60456 (temperature selector knob).
Programme
*
, as per standard EN 60456.
FAST WASH PROGRAMME
29-minute cycle 2
29´
50º
COTTON
SYNTHETICS
DELICATES
From cold
to…
50º
From cold
to…
90º
From cold
to…
90º
From cold
to…
60º
From cold
to…
40º
—
—
—
—
From cold
to…
60º
From cold
to…
50º
From cold
to…
40º
From cold
to…
40º
—
—
—
—
38
REMARKS
1. For highly soiled clothes, use a maximum load of 3 kg.
(
*
)2. In programmes 5, 6, 7 and 8 the washing machine stops with water in the drum at
the end of the rinse cycle to prevent creasing.
To finish the cycle, select programme Z to drain the drum. Another option is to select
programme: gentle spin.
Always turn the machine off with the ON/OFF button before selecting
programme.
3. In programmes 1 and 2, add bleach in the appropriate compartment for automatic
whitening.
4. This machine is designed to use fabric softener in the last rinse automatically in all
washing cycles.
(
*
) Only available in some models.
29-MINUTE FAST PROGRAMME
This programme runs through a complete washing cycle for up to 2 kg of
clothes at 50 ºC in just 29 minutes.
Pour washing powder/liquid into the pre-wash compartment (compartment
I).
The maximum amount of bleach which can be used is shown on the specific
indicator provided.
The 29-minute fast programme can also be used as a pre-wash cycle with
particularly heavily soiled clothes. Just select the desired main programme
afterwards.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Otsein-Hoover LB LTD 584 H User manual

Otsein-Hoover
Brand
Otsein-Hoover
Model
LB LTD 584 H
Category
Washing machines
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents