ZENEC Z-E1010 User manual

Z-E1010
ZENEC
Brand
ZENEC
Model
Z-E1010
Type
User manual

ZENEC Z-E1010 is a multimedia device that combines navigation, entertainment, and communication features to enhance your driving experience. With its large touchscreen display, you can easily access a variety of functions, including:

  • Navigation: Get turn-by-turn directions, real-time traffic updates, and points of interest with the pre-installed iGO navigation software.

  • Entertainment: Enjoy your favorite music, videos, and photos with the built-in media player. You can also connect your smartphone via Bluetooth or USB to access your music library or stream audio apps like Spotify.

ZENEC Z-E1010 is a multimedia device that combines navigation, entertainment, and communication features to enhance your driving experience. With its large touchscreen display, you can easily access a variety of functions, including:

  • Navigation: Get turn-by-turn directions, real-time traffic updates, and points of interest with the pre-installed iGO navigation software.

  • Entertainment: Enjoy your favorite music, videos, and photos with the built-in media player. You can also connect your smartphone via Bluetooth or USB to access your music library or stream audio apps like Spotify.

1 of 3 December 2021 / RevA
MIB1 – Z-E1010 Update Installation Instructions MainSystem
Requirements
ATTENTION: The Z-E1010 device must be prepared for operation and software installation with a frame kit-/ power cable suitable
for MIB1 vehicles.
After successful software installation, the Z-E1010 device must be set to MIB1 Low-Speed CAN data recognition (!) This is done
by changing a switch in the device setup of the Z-E1010.
Note: With the factory setting of the CAN data recognition in the device setup menu to MIB2, the Z-E1010 in MIB1 vehicles
receives no power when connected in the vehicle, since MIB1 low-speed CAN data are not recognized by the device.
The update consists of a complete MainSystem software update, which must be run from USB data carrier. You will need:
> USB removable storage device (USB stick) with at least 2 GB storage capacity.
> A PC or notebook with Windows operating system.
Please note:
• Before you start, the USB stick must be formatted with FAT 32. (Right-click on USB memory device in Windows Explorer.
Select "Format" > FAT 32 > Start.
• The ZENEC Z-E1010 restarts several times during the software update and stays off, among other things, for a few seconds
(black screen for approx. 5 ~ 10 sec.) before the device restarts. Please do not operate or switch off the device during the
update process. After successful installation the tuner source will come up.
Installation of the MainSystem software update via USB:
The MainSystem software can be found at: www.zenec.com > Support> Software Updates > Z-E1010
Link: http://www.zenec.com/support/software-updates/e-go-core-z-e1010/?lang=en
1. MIB1 power cable prepare for software installation – see MIB1 > MIB2 Setup Instructions
EGO_CORE_MIB1-MIB2_Setup_EN_RevA (Quadlock II cable harness preparation). Connect the female “ACC” bullet
connector to its male “ACC” counterpart. See  gure.
3. The software package is a self-unzipping executable. Start extraction with a double-click and select your USB stick as target
for the uncompressed  les.
4. You obtain a update  le called „Android7.1.2_20211130.1542_zenec_core.img” in the root directory of the USB stick.
5. Connect the USB stick to the Z-E1010 USB-1 connection cable.
2. Download the Software Update "Z-E1010_Core_SW_v3.4.exe".
9. The update installs sequentially and the lower part of the display screen informs about the progress. The software installation
takes about 4~5 minutes.
10. After successful software installation, the device reboots serval time and then the MainMenu will show up.
11. Remove the USB stick.
2 of 3 December 2021 / RevA
MIB1 – Z-E1010 Update Installation Instructions MainSystem
7. The update dialog menu is shown. Make sure that, the checkboxes [TUNER DB] and [OS] are selected.
8. Tap on the „YES“ but ton to start the update process.
12. Attention: The desired vehicle platform (MIB1) must be set now. To change the platform type to MIB1 a password must be
entered (avoiding accidental change of platform setting).
13. In the device main menu, tap on the icon "Settings” ► “Password Function” and enter 808135. Con rm the password with
“OK”. And con rm the "MIB1 platform update" popup window with "YES".
14. The device does install the (MIB1-MCU) software and performs a reboot – platform switch changes to MIB1.
6. Go to the device menu:
Settings > System > Software Update and con rm by tapping on the green hook checkbox.
MIB1 – Z-E1010 Update Installation Instructions MainSystem
Version control
After installing the software update a version check needs to be carried out. In the device menu:
Settings > System > Software Version Info.
Version: v3.4
If the version differs from the target version, install the update anew.
3 of 3 December 2021 / RevA
Please do not operate or switch off the device during the restart process (duration approx. 3 minutes).
After restart, the MainMenu will show up.
Improvements – bug xes and function updates:
MAINSYSTEM
• Improved system stability and performance
• NEW: Abalta Weblink 2.0 runnable integration, i.e. Youtube, ShoutCast and Android audio / video player connectivity.
• iGO protocol update to x the roundabout exit number ickering in the MFA*
*In combination with the latest iGO navigation software. Update is available via Naviextras Toolbox www.naviextras.com
TUNER
• Local tuner slideshow database update to v1.21
MEDIA PLAYER
• Bugx for last playback issue sometimes on USB-2
BLUETOOTH
• Font and brightness improvements in various Bluetooth pages
15. After successful MIB platform conguration (MIB-1 software installation) the main menu is displayed.
16. Now disconnect the cables with the "ACC" ag on the wiring harness.
17. Version check
  • Page 1 1
  • Page 2 2
  • Page 3 3

ZENEC Z-E1010 User manual

Z-E1010
ZENEC
Brand
ZENEC
Model
Z-E1010
Type
User manual

ZENEC Z-E1010 is a multimedia device that combines navigation, entertainment, and communication features to enhance your driving experience. With its large touchscreen display, you can easily access a variety of functions, including:

  • Navigation: Get turn-by-turn directions, real-time traffic updates, and points of interest with the pre-installed iGO navigation software.

  • Entertainment: Enjoy your favorite music, videos, and photos with the built-in media player. You can also connect your smartphone via Bluetooth or USB to access your music library or stream audio apps like Spotify.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents