ZENEC Z-E1010 User manual

Type
User manual

ZENEC Z-E1010: Experience cutting-edge in-car entertainment and seamless connectivity with our feature-packed multimedia system. Navigate with precision using the pre-installed iGO navigation software, updated with the latest maps for precise guidance. Stay connected with built-in Wi-Fi, enabling access to your favorite apps and online content. Enjoy a vibrant and immersive viewing experience with the high-resolution display, perfect for watching movies or displaying reverse camera footage.

ZENEC Z-E1010: Experience cutting-edge in-car entertainment and seamless connectivity with our feature-packed multimedia system. Navigate with precision using the pre-installed iGO navigation software, updated with the latest maps for precise guidance. Stay connected with built-in Wi-Fi, enabling access to your favorite apps and online content. Enjoy a vibrant and immersive viewing experience with the high-resolution display, perfect for watching movies or displaying reverse camera footage.

1 of 3 January 2022 / RevA
MIB2 – Z-E1010 Update Installation Instructions MainSystem
Requirements
The update consists of a complete MainSystem software update, which must be run from USB data carrier. You will need:
> USB removable storage device (USB stick) with at least 2 GB storage capacity.
> A PC or notebook with Windows operating system.
Please note:
Before you start, the USB stick must be formatted with FAT 32. (Right-click on USB memory device in Windows Explorer.
Select "Format" > FAT 32 > Start.
The ZENEC Z-E1010 restarts several times during the software update and stays off, among other things, for a few seconds
(black screen for approx. 5 ~ 10 sec.) before the device restarts. Please do not operate or switch off the device during the
update process. After successful installation the tuner source will come up.
ATTENTION: After successful software installation, the Z-E1010 device must be set to MIB2 High-Speed CAN data recognition (!)
Installation of the MainSystem software update via USB:
The MainSystem software can be found at: www.zenec.com > Support> Software Updates > Z-E1010
Link: http://www.zenec.com/support/software-updates/e-go-core-z-e1010/?lang=en
1. Download the Software Update "Z-E1010_Core_SW_v3.6.exe".
2. The software package is a self-unzipping executable. Start extraction with a double-click and select your USB stick as target
for the uncompressed  les.
3. You obtain a update  le called „Android7.1.2_20220112.20_zenec_core.img” in the root directory of the USB stick.
4. Connect the USB stick to the Z-E1010 USB-1 connection cable.
5. Go to the device menu:
Settings > System > Software Update and con rm by tapping on the green hook checkbox.
8. The update installs sequentially and the lower part of the display screen informs about the progress. The software installation
takes about 4~5 minutes.
9. After successful software installation, the device reboots serval time and then the MainMenu will show up.
10. Remove the USB stick.
2 of 3 January 2022 / RevA
MIB2 – Z-E1010 Update Installation Instructions MainSystem
6. The update dialog menu is shown. Make sure that, the checkboxes [TUNER DB] and [OS] are selected.
7. Tap on the „YES button to start the update process.
11. Attention: The desired vehicle platform (MIB2) must be set now. To change the platform type to MIB2 a password must be
entered (avoiding accidental change of platform setting).
12. In the device main menu, tap on the icon "Settings” ► “Password Function” and enter 778166. Con rm the password with
“OK. And con rm the "MIB2 platform update" popup window with "YES".
13. The device does install the (MIB2-MCU) software and performs a reboot – platform switch changes to MIB2.
14. After successful MIB platform con guration (MIB-2 software installation) the main menu is displayed.
MIB2 – Z-E1010 Update Installation Instructions MainSystem
Version control
After installing the software update a version check needs to be carried out. In the device menu:
Settings > System > Software Version Info.
Version: v3.6
If the version differs from the target version, install the update anew.
3 of 3 January 2022 / RevA
16. Version check
Please do not operate or switch off the device during the restart process (duration approx. 3 minutes).
After restart, the MainMenu will show up.
Note: After the loading factory defaults, some personal settings must be set again (such as camera grid lines, audio settings etc.).
Improvements – bug xes and function updates:
MAINSYSTEM
Improved system stability and performance
NEW: Abalta Weblink 2.0 runnable integration, i.e. Youtube, ShoutCast and Android audio / video player connectivity.
NEW: Wi logic change that enables Wi use again.
iGO protocol update to x the roundabout exit number ickering in the MFA*
*In combination with the latest iGO navigation software. Update is available via Naviextras Toolbox www.naviextras.com
TUNER
NEW: Local tuner slideshow database update to v1.21
CAN-BUS / CAR-MENU / MFA – (MIB-2 vehicle models)
Added headlight range control for VW Passat, Skoda Octavia und other VW/Skoda vehicles, adjustable via Car Menu.
Added ambient light control, adjustable via Car Menu.
Integration of Webasto auxiliary heating, particular days can be set now.
Added setup of dynamic damper control inside the Drive Mode feature, adjustable via Car Menu.
Improved Drive Mode, button at dashboard will open the Drive Mode prole page with current selected mode. Current
supported proles: Eco, Comfort, Normal, Sport, Individual.
Added support for steering wheel heating.
Added control button for electrical front window heating via AC menu.
Added control buttons for seat ventilation via AC menu.
Added setting for driver alert system
Added setting for rear trafc alert
Added setting for lower passenger side mirror while reversing
Fix for activating the lane assist
Activated the road sign detection feature at multifunction display (MFD) by using the front camera*
*road sign detection will work only by the base of data provided by front camera, currently the navigation map data from Zenec
device is not used to be compared for this feature. Due to this you might get the hint on your MFD “Road sign detection limited”.
CAMERA
Added support of the 360° VW OE camera systems / bird view camera feature
MEDIA PLAYER
Bugx for last playback issue sometimes on USB-2
BLUETOOTH
Font and brightness improvements in various Bluetooth pages
15. Make a RESET by press and hold the "RST" button for 2~3 seconds with using of a pointed object.
  • Page 1 1
  • Page 2 2
  • Page 3 3

ZENEC Z-E1010 User manual

Type
User manual

ZENEC Z-E1010: Experience cutting-edge in-car entertainment and seamless connectivity with our feature-packed multimedia system. Navigate with precision using the pre-installed iGO navigation software, updated with the latest maps for precise guidance. Stay connected with built-in Wi-Fi, enabling access to your favorite apps and online content. Enjoy a vibrant and immersive viewing experience with the high-resolution display, perfect for watching movies or displaying reverse camera footage.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI