Halco Lighting Technologies RHB240/110U/50 10260 Operating instructions

Brand
Halco Lighting Technologies
Model
RHB240/110U/50 10260
Type
Operating instructions

This manual is also suitable for

Halco Lighting Technologies | 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone 770.242.3612 | Fax 800.880.0822 | halcolighting.com | Atlanta | Chicago | Cleveland | Houston | Los Angeles | Phoenix
ProLED
®
Round LED High Bay Gen II
Installation Instructions
®
© 2019 Halco Lighting Technologies, LLC. All rights reserved. Halco is a registered trademark of Halco Lighting Technologies. All sizes and specications are subject to change.
Please read the below articles carefully to see how to use this product safely.
Warning contents and attention contents related to product safety use, please be sure to follow it.
Power
Input Current
Input Voltage
Frequency
Model
Power
Input Current
Input Voltage
Frequency
Model
100W
1.1A
RHB100/110U/XX
0.398A
RHB100/110H/XX
150W
1.65A
AC100-277V
50/60Hz
AC277-480V
50/60Hz
RHB150/110U/XX
0.596A
RHB150/110H/XX
200W
2.2A
RHB200/110U/XX
0.795A
RHB200/110H/XX
240W
2.64A
RHB240/110U/XX
0.954A
RHB200/110H/XX
100W 150W 200W 240W
1. Ring Mount Installation:
1.Lock the ring.
2.Tighten the screw.
(This step can be omitted if there is
no screw hole.)
screw hole
screw
3.Hang up the light.
2. Hook Mount Installation:
1.Lock the hook.
2.Tighten the screw.
(This step can be omitted if there is
no screw hole.)
screw hole
screw
screw
3.Hang up the light.
4.Lock the screw.
© 2019 Halco Lighting Technologies, LLC. All rights reserved. Halco is a registered trademark of Halco Lighting Technologies. All sizes and specications are subject to change.
Halco Lighting Technologies | 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone 770.242.3612 | Fax 800.880.0822 | halcolighting.com | Atlanta | Chicago | Cleveland | Houston | Los Angeles | Phoenix
Warranty Information:
This product is warranted for ve years from the date of purchase.
If this product does not perform to the specications supplied on this package, send an email or write to the address below for product return and
replacement. This replacement is the sole remedy available.
Liability for incidental or consequential damage is expressly excluded.
Visit www.halcolighting.com for full warranty details and compatibility information.
Product Dimension
1. Ring Mount
Ø
10.18“
5.20“
6.92”
100W
Ø
13.91“
6.10“
8.23“
240W
150W
Ø
11.33“
6.12“
8.25“
200W
Ø
13.91“
6.08“
8.21“
2. Hook Mount:
Ø
13.91“
6.10“
8.65“
240W
Ø
11.33“
6.12“
8.67“
150W
5.20“
7.69”
Ø
10.18“
100W
Ø
13.91“
6.08“
8.63“
200W
Dimmer connection ( With dimmable driver.)
Wiring Connection
Turn off the power, connect AC wire. black wire to L, white wire to N, and green wire to E.
this step can be omitted
if with non-dim driver
driver
Round High Bay
The Installation must be carried out by
a qualified
electrician.
  • Page 1 1
  • Page 2 2

Halco Lighting Technologies RHB240/110U/50 10260 Operating instructions

Brand
Halco Lighting Technologies
Model
RHB240/110U/50 10260
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents