Diebold Nixdorf EPC 7G Operating instructions

EPC 7G

Operator Manual

01750370440 B

Confidential External

Only Diebold Nixdorf and entities that are granted an express written license by Diebold Nixdorf may

possess or use this material. Unauthorized possession or use is illegal. If you do not have a written

license agreement with Diebold Nixdorf, the Documentation License terms at dnlegalterms.com apply.

This document contains proprietary information of Diebold Nixdorf, Incorporated or its subsidiaries (col-

lectively “Diebold Nixdorf“) and may include information that is protected by copyright, trademark and

patent laws in the US, Germany, and globally. All rights, including rights created by patent grants or reg-

istration of a utility model or design, are reserved.

No part of this document may be translated, reproduced, stored in a retrieval system, or transmit-

ted, in any form or by any means: electronic, mechanical, photocopying, recording, or otherwise,

without prior written permission from Diebold Nixdorf. Any violations of the foregoing may give

rise to a claim for damages.

If the document pages state the information is confidential (or words of similar import), then this

document is intended solely for the use of the employees or other personnel of Diebold Nixdorf

unless expressly authorized in writing by Diebold Nixdorf. Other uses of this information without

the express written consent of Diebold Nixdorf are prohibited.

This document should be treated as confidential material for security reasons. Any unauthorized

disclosure or use of confidential material may violate the U.S. Theft of Trade Secrets provisions

of Section 1832 of Title 18 of the United States Code as well as comparable laws in other jurisdic-

tions throughout the world, and may be punishable by fine and imprisonment.

This document and the information contained herein are provided AS IS AND WITHOUT WARRANTY.

In no event shall Diebold Nixdorf or its suppliers be liable for any special, indirect, or consequential dam-

ages of any nature resulting from the use of information in this manual. The information contained in this

document is subject to change without notice. When using the document for system implementation,

please call your authorized Diebold Nixdorf sales or service representative for any applicable changes.

Any trademarks, service marks, product names or company names not owned by Diebold Nixdorf, that

appear in this document are used for informational purposes only, and Diebold Nixdorf claims no rights

thereto, nor does such use indicate any affiliation with or any endorsement of Diebold Nixdorf or Diebold

Nixdorf products by the owners thereof.

Your use of this document and/or any of the information contained herein constitutes your agreement to

all of the terms stated on this page.

Confidential External

01750370440 B

ii

Table of Content

1 Introduction ................................................................................................................................ 1-1

1.1 Symbols used in this Manual ............................................................................................ 1-2

1.2 Section-Specific Warning Notes ........................................................................................ 1-3

1.3 Signs, Markings and Symbols ........................................................................................... 1-4

1.4 Manufacturer´s Certification............................................................................................... 1-5

2 Description ................................................................................................................................. 2-1

2.1 Equipment options ............................................................................................................. 2-1

2.1.1 Switch-on button and LED .................................................................................. 2-2

2.1.2 USB interfaces for service purposes .................................................................. 2-3

2.2 External view ..................................................................................................................... 2-4

2.2.1 Front view ........................................................................................................... 2-4

2.2.2 Rear view............................................................................................................ 2-5

2.2.3 Interfaces ............................................................................................................ 2-6

2.3 Inside view ......................................................................................................................... 2-10

2.4 Technical Data................................................................................................................... 2-11

2.5 Interfaces (T1/T2 motherboard)......................................................................................... 2-12

2.6 Nominal connected load interfaces.................................................................................... 2-12

2.7 Motherboard ...................................................................................................................... 2-12

3 Start-up ....................................................................................................................................... 3-1

3.1 Setting up the device ......................................................................................................... 3-1

3.1.1 Vertical installation.............................................................................................. 3-2

3.2 Wiring the EPC .................................................................................................................. 3-3

3.3 Before switching on ........................................................................................................... 3-5

4 Disengaging cables ................................................................................................................... 4-1

5 Disposal ...................................................................................................................................... 5-1

Confidential External

01750370440 B

iii

Table of Content

Table of Figures

Figure 2-1 Switch-on Button ................................................................................................... 2-2

Figure 2-2 USB-Interfaces ...................................................................................................... 2-3

Figure 2-3 Interfaces............................................................................................................... 2-6

Figure 2-4 USB Interfaces ...................................................................................................... 2-7

Figure 2-5 Inside View ............................................................................................................ 2-10

Figure 3-1 Minimum distance.................................................................................................. 3-1

Figure 3-2 EPC cabeling......................................................................................................... 3-3

Figure 3-3 Pin assignment DC in ............................................................................................ 3-4

Figure 3-4 Label Location ....................................................................................................... 3-5

Confidential External

01750370440 B

iv

1

1 Introduction

This operator manual is intended to make you acquainted with the system and its intended use. Please

refer to the Safety chapter for the corresponding intended use (see Intended use).

This manual contains important information regarding how to operate the system in a safe, appropriate

and economical manner. Compliance with this manual will help to reduce hazards, repair costs and

downtime, as well as to increase the reliability and service life of the system. Existing national regula-

tions for accident prevention and environmental protection are also valid. The operator must ensure that

every person working on or with the system reads and utilizes this manual.

This manual must be kept in a designated and easily accessible location and it must be referred to in the

event of even the slightest doubt.

This manual contains the following information:

• A description of the system and the components used (see Description).

• Steps that are required for correct operation of the system and access to components of the system

chassis, fascia and safe (see Operation).

• Steps and information about cleaning and maintaining the system (see Maintenance).

• Information regarding disposal of the system (see Section5).

• Information about how to access corresponding documentation (see Corresponding documentation).

Further information can be found in the operator manuals of the individual components, which are listed

in the chapter "Corresponding documentation".

This operator manual is intended to make it easier for you to get to know the component in question and

for you to use its range of applications.

This manual contains important information regarding how to operate the component in a safe, appropri-

ate and economical manner. Your attention will help to reduce hazards, repair costs and downtime, as

well as to increase the reliability and service life of the respective product.

Existing national regulations for accident prevention and environmental protection are also valid.

The operator should ensure that every person working on or with the component reads and utilizes this

manual.

This manual must be kept in a designated and easily accessible location and it must be referred to in the

event of even the slightest doubt.

Confidential External

01750370440 B

1-1

Introduction

1.1

1.1 Symbols used in this Manual

●Text following a bullet point represents an item in a list.

‚‘ Text in simple quotation marks relates to components/mounting parts which are in-

cluded in the delivery package.

Prerequisite that must be fulfilled before an action.

1.

2.

n.

Numbered instructions describe activities which must be carried out in the specified se-

quence

Intermediate result of an action.

Action successfully completed.

Confidential External

01750370440 B

1-2

Introduction

1.2

1.2 Section-Specific Warning Notes

DANGER

This warning note describes a hazard with a high degree of risk which, if not avoided,

will result in death or grave bodily injury.

WARNING

This warning note describes a hazard with a medium degree of risk which, if not

avoided, could result in death or grave bodily injury.

CAUTION

This warning note describes a hazard with a low degree of risk which, if not avoided,

could result in slight or minor bodily injury.

NOTE

This note provides application tips and information that help prevent errors and material

damage.

Confidential External

01750370440 B

1-3

Introduction

1.3

1.3 Signs, Markings and Symbols

Table1-1: Warning signs used

Warning signs

General

warning sign

Warning of

electrical voltage

Warning of

hot surface

Warning of

hand injuries

Warning of

counter-rotating

rollers

Warning of

sharp

object

Warning of

laser radiation

Warning of

obstacles

in the head area

Table1-2: Mandatory signs used

Mandatory signs

Observe

the manual

Wear

eye protection

Wear

foot protection

Wear

hand protection

Pull

main plug

Wear

ear protection

Ground

before use

Confidential External

01750370440 B

1-4

Introduction

1.4

1.4 Manufacturer´s Certification

NOTE

This device meets the requirements of the EU Guidelines 2014/30/EU "Electromagnetic

Compatibility" and 2014/35/EU “Low Voltage Directive” and 2011/65/EU "Restriction of

Hazardous Substances".

For this, it bears the CE label on the rear side or the icon is printed on the packaging.

NOTE

The device is approved for use in the US and Canada.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Responsible Party in the U.S.

Contact:

Diebold Nixdorf

Address: 5995 Mayfair Road

N. Canton, OH 44720 / USA

mailto:[email protected]

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area may cause harmful interference in which case the user will be required to correct the

interference at his expense. Modifications not authorized by the manufacturer may void user’s authority

to operate this device.

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numerique de la classe A est conforme à la norme NMB-003 du Canada. (2) this device

must accept any interference received, including interference that may cause undesired operation

Confidential External

01750370440 B

1-5

2

2 Description

2.1

2.1 Equipment options

The following configuration options are available for the EPC:

• Optional Switch-on button and LED on the front side

• Two USB2.0 sockets on the front or rear side of the device

• Installation option of a PCle board

Confidential External

01750370440 B

2-1

Description

2.1.1

2.1.1 Switch-on button and LED

The installation of a switch-on button and the LED on the front side of the device is available to you as a

possible option.

1

2

Figure2-1: Switch-on Button

1Switch-on button 2LED

Confidential External

01750370440 B

2-2

Description

2.1.2

2.1.2 USB interfaces for service purposes

Depending on the installation situation of the EPC, two USB2.0 ports are mounted either on the front or

on the rear side.

They are intended exclusively for Service work.

1

2

Figure2-2: USB-Interfaces

12x USB 2.0 interfaces (front side) 22x USB 2.0 interfaces (rear side)

Confidential External

01750370440 B

2-3

Description

2.2

2.2 External view

2.2.1

2.2.1 Front view

Confidential External

01750370440 B

2-4

Description

2.2.2

2.2.2 Rear view

Confidential External

01750370440 B

2-5

Description

2.2.3

2.2.3 Interfaces

1235

6

4

Figure2-3: Interfaces

1Power jack 4LAN1/AMT, LAN2

2On/Off button 53x audio jack 3.5 mm (1.38")

3DP1, DP2, DP3

Confidential External

01750370440 B

2-6

Description

13

4

2

Figure2-4: USB Interfaces

12x USB 2.0 (for Service personnel only) 32x USB 3.0

26x USB 2.0

2.2.3.1

2.2.3.1 On/Off button

If the power supply unit is powered, then the system is switched on by pressing the On/Off button.

2.2.3.2

2.2.3.2 DP1, DP2, DP3

The DPx interfaces can be used to connect high-resolution LCD monitors and to transmit video signals

with a max. resolution of max. 4096 x 2304@60 Hz.

Screens can be attached to DP1, DP2 or DP3.

Confidential External

01750370440 B

2-7

Description

2.2.3.3

2.2.3.3 USB (Universal Serial Bus) A 2.0, 3.0

You can connect a variety of USB peripheral devices to these ports (USB-A), e.g. separators or receipt

printers.

NOTE

Connect only devices and cables which correspond to the valid USB standard specifica-

tions.

2.2.3.4

2.2.3.4 LAN1, LAN2

The cable for the connection to a network (LAN) is plugged in here. The LAN1/AMT interface supports

Active Management Technology (AMT).

AMT is available as an orderable option for the EPC_7G. AMT is not available as an upgrade. AMT en-

ables administration of the system without support of the operating system.

LEDs

Left LED Constant green Network connection established

Flashes green Data transfer

Right LED off 10 MBit

Constant green 100 MBit

Constant orange 1000 MBit

NOTE

Use only shielded LAN cables marked with CAT5 or CAT5e (for 1000 MBit). These offer

greater protection against malfunctions in the network

2.2.3.5

2.2.3.5 3.5 mm audio jack (In/Out/microphone)

Audio devices such as headphones, loudspeakers and microphones can be connected to these ports.

The three sockets are mechanically identical, although they differ in their function. The blue socket (Line

In) is an audio input. External audio sources can be connected here. The green socket (Line Out) is an

audio output. Headphones or loudspeakers can be connected here. Finally, a microphone can be con-

nected to the pink socket (Mic).

You can adjust the required volume through the software in the operating system or through the operat-

ing system itself (for example, the Windows operating system features a small loudspeaker symbol on

the taskbar which can be used to control the volume).

Confidential External

01750370440 B

2-8

Description

2.2.3.6

2.2.3.6 Light emitting diode(s)

The light emitting diode on the rear of the system shows the following:

LED lights red Read or write access on HDD/SSD

LED lights green Device is switched on (S0)

The light emitting diodes (optional) at the front of the system are marked:

LED lights up yellow Read or write access on HDD/SSD

LED lights green Device is switched on (S0)

LED flashes green Standby (S3)

Confidential External

01750370440 B

2-9

Description

2.3

2.3 Inside view

1

3

4

5

6

7

8

9

2

Figure2-5: Inside View

1Housing cover 2USB (optional at rear or front)

3Motherboard 4Fan

5Air duct 6Heat sink

7ON/OFF switch at front (optional) 8Connector side

Confidential External

01750370440 B

2-10

Description

2.4

2.4 Technical Data

Size

Width 295 mm (11.6")

Depth 215 mm (8.46")

Height 95 mm (3.74")

Weight approx. 2.9 kg

Ambient conditionsen

Climate class 3K3 DIN IEC 721-3-3

Climate class 2K2 DIN IEC 721-3-2

Climate class 1K2 DIN IEC 721-3-1

Temperature

Operation (3K3) without condensation 0°C to +50°C (32°F to 122°F)

Transport (2K2) -25°C to +60°C (-13°F to +140°F)

Storage (1K4) - 10°C to + 60°C (+50°F to +140°F) for four weeks, after-

wards as with operation

Processor

DN-670-T1 Motherboard (Alder Lake) Intel Core i5-12500E

Intel Core i7-12700E

DN-670-T2 Motherboard (Alder Lake) Intel Core i3-12100E

Intel Core i5-12500E

Intel Core i7-12700E

Intel Celeron G6900E

Input voltage DC 12 V (+8/-6%)

Power consumption Max. 8 A

T1/T2: Intel Q670E Chipset

Confidential External

01750370440 B

2-11

Page is loading ...

Diebold Nixdorf EPC 7G Operating instructions

Diebold Nixdorf EPC 7G Operating instructions

Related papers

Other documents