Diebold Nixdorf DA53 Operating instructions

DA53 Multi I/O Hub

Operator Manual

01750365615 B

Confidential External

Only Diebold Nixdorf and entities that are granted an express written license by Diebold Nixdorf may

possess or use this material. Unauthorized possession or use is illegal. If you do not have a written

license agreement with Diebold Nixdorf, the Documentation License terms at dnlegalterms.com apply.

This document contains proprietary information of Diebold Nixdorf, Incorporated or its subsidiaries (col-

lectively “Diebold Nixdorf“) and may include information that is protected by copyright, trademark and

patent laws in the US, Germany, and globally. All rights, including rights created by patent grants or reg-

istration of a utility model or design, are reserved.

No part of this document may be translated, reproduced, stored in a retrieval system, or transmit-

ted, in any form or by any means: electronic, mechanical, photocopying, recording, or otherwise,

without prior written permission from Diebold Nixdorf. Any violations of the foregoing may give

rise to a claim for damages.

If the document pages state the information is confidential (or words of similar import), then this

document is intended solely for the use of the employees or other personnel of Diebold Nixdorf

unless expressly authorized in writing by Diebold Nixdorf. Other uses of this information without

the express written consent of Diebold Nixdorf are prohibited.

This document should be treated as confidential material for security reasons. Any unauthorized

disclosure or use of confidential material may violate the U.S. Theft of Trade Secrets provisions

of Section 1832 of Title 18 of the United States Code as well as comparable laws in other jurisdic-

tions throughout the world, and may be punishable by fine and imprisonment.

This document and the information contained herein are provided AS IS AND WITHOUT WARRANTY.

In no event shall Diebold Nixdorf or its suppliers be liable for any special, indirect, or consequential dam-

ages of any nature resulting from the use of information in this manual. The information contained in this

document is subject to change without notice. When using the document for system implementation,

please call your authorized Diebold Nixdorf sales or service representative for any applicable changes.

Any trademarks, service marks, product names or company names not owned by Diebold Nixdorf, that

appear in this document are used for informational purposes only, and Diebold Nixdorf claims no rights

thereto, nor does such use indicate any affiliation with or any endorsement of Diebold Nixdorf or Diebold

Nixdorf products by the owners thereof.

Your use of this document and/or any of the information contained herein constitutes your agreement to

all of the terms stated on this page.

Confidential External

01750365615 B

ii

Table of Contents

1 Introduction ................................................................................................................................ 1-1

1.1 Symbols used in this Manual ............................................................................................1-1

1.2 Section-Specific Warning Notes.........................................................................................1-2

1.3 Type plates.........................................................................................................................1-3

1.4 Certifications of the Manufacturer ......................................................................................1-4

2 Safety Precautions..................................................................................................................... 2-1

3 Description ................................................................................................................................. 3-1

3.1 Interfaces ...........................................................................................................................3-2

3.2 Dimensions ........................................................................................................................3-4

3.3 AC Power Adapter .............................................................................................................3-5

3.4 LAN Port LED Indications ..................................................................................................3-6

3.5 Technical Data ...................................................................................................................3-7

3.5.1 Total Available Power ......................................................................................... 3-8

4 Installation .................................................................................................................................. 4-1

4.1 Mount hub to stand ............................................................................................................4-1

4.2 Mount hub on wall ..............................................................................................................4-3

4.3 Cabling ...............................................................................................................................4-5

5 Disposal ...................................................................................................................................... 5-1

Confidential External

01750365615 B

iii

Table of Contents

List of Figures

Figure 1-1 Type plates.............................................................................................................1-3

Figure 3-1 DA53 Multi I/O Hub ................................................................................................3-1

Figure 3-2 HUB-Interfaces, front..............................................................................................3-2

Figure 3-3 Hub-Interfaces, back ..............................................................................................3-3

Figure 3-4 Dimensions DA53 I/O Hub .....................................................................................3-4

Figure 3-5 AC power adapter ..................................................................................................3-5

Figure 4-1 Secure I/O hub with two screws.............................................................................4-1

Figure 4-2 Connect the cable ..................................................................................................4-1

Figure 4-3 Cover on hub..........................................................................................................4-2

Figure 4-4 Mount wall holder ...................................................................................................4-3

Figure 4-5 Mount the hub ........................................................................................................4-4

Figure 4-6 4-pin power supply connector ................................................................................4-5

Figure 4-7 RJ connection.........................................................................................................4-6

Figure 4-8 USB port.................................................................................................................4-6

Figure 4-9 USB-C port .............................................................................................................4-7

Confidential External

01750365615 B

iv

Table of Contents

List of Tables

Table 3-1 Technical Data .......................................................................................................3-7

Table 3-2 Total power available .............................................................................................3-8

Confidential External

01750365615 B

v

1

1 Introduction

This operator manual is intended to make it easier for you to get to know the component in question and

for you to use its range of applications.

This manual contains important information regarding how to operate the component in a safe, appropri-

ate and economical manner. Your attention will help to reduce hazards, repair costs and downtime, as

well as to increase the reliability and service life of the respective product.

Existing national regulations for accident prevention and environmental protection are also valid.

The operator should ensure that every person working on or with the component reads and utilizes this

manual.

This manual must be kept in a designated and easily accessible location and it must be referred to in the

event of even the slightest doubt.

1.1

1.1 Symbols used in this Manual

●Text following a bullet point represents an item in a list.

‚‘ Text in simple quotation marks relates to components/mounting parts which are in-

cluded in the delivery package.

Prerequisite that must be fulfilled before an action.

1.

2.

n.

Numbered instructions describe activities which must be carried out in the specified se-

quence

Intermediate result of an action.

Action successfully completed.

Confidential External

01750365615 B

1-1

Introduction

1.2

1.2 Section-Specific Warning Notes

DANGER

This warning note describes a hazard with a high degree of risk which, if not avoided,

will result in death or grave bodily injury.

WARNING

This warning note describes a hazard with a medium degree of risk which, if not

avoided, could result in death or grave bodily injury.

CAUTION

This warning note describes a hazard with a low degree of risk which, if not avoided,

could result in slight or minor bodily injury.

NOTE

This note provides application tips and information that help prevent errors and material

damage.

Confidential External

01750365615 B

1-2

Introduction

1.3

1.3 Type plates

Figure1-1: Type plates

The type plates of the different DA53 Multi I/O Hub versions are shown.

Confidential External

01750365615 B

1-3

Introduction

1.4

1.4 Certifications of the Manufacturer

The device complies with the requirements of the EU directives 2014/30/EU with

regard to “Electromagnetic compatibility” and, if applicable, 2014/35/EU “Low

Voltage Directive” and 2011/65/EU "Restriction of Hazardous Substances".

Therefore, you will find the CE mark on the device or packaging.

The device is approved for the USA and Canada.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Responsible Party in the U. S.: Diebold Nixdorf

Address: 5995 Mayfair Road

N. Canton, OH 44720 / USA

Contact: [email protected]

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area may cause harmful interference in which case the user will be required to correct the

interference at his expense. Modifications not authorized by the manufacturer may void user’s authority

to operate this device.

This class A digital apparatus complies with Canadian ICES-003.

This device must accept any interference received, including interference that may cause undesired op-

eration.

Confidential External

01750365615 B

1-4

2

2 Safety Precautions

DANGER

Repairs

Repair work on the system or on the components may be carried out only by authorized

specialist staff. Unauthorized opening of the system or repair work carried out improp-

erly could result in considerable danger to the user.

In case of noncompliance, Diebold Nixdorf excludes all liability.

Confidential External

01750365615 B

2-1

3

3 Description

Figure3-1: DA53 Multi I/O Hub

The DA53 Multi I/O Hub provides a large number of classic peripheral interfaces for the required devices

and thus serves as a service point for each individual POS workplace.

This means that the POS-specific peripherals are connected to the POS system via the Multi Interface

Hub with only one cable (USB-C).

In the event of an error and replacement of the POS system, all peripherals remain on the hub. Replac-

ing the POS system is therefore particularly quick.

Whatever configuration you need, Diebold Nixdorf offers the right solution.

For questions about your DA53 Multi I/O Hub or other Diebold Nixdorf products and solutions, visit us on

the Internet.

Confidential External

01750365615 B

3-1

Description

3.1

3.1 Interfaces

Interfaces, front

1

2

3

4

5

6

7

8

Figure3-2: HUB-Interfaces, front

1 1 x USB C

(with PD 5 V/12 V + DisplayPort)

5 1 x USB power source

(24 V PUSB)

2 1 x Network Interface RJ45 6 1 x RJ12 Cash Drawer

3 2 x USB 3.0 type A 7 1 x power supply connector 24 V

4 1 x USB power source

(12 V PUSB)

8 1x USB C uplink connection

incl. 24 V for system unit

Confidential External

01750365615 B

3-2

Description

Interfaces, back

1

2

3

Figure3-3: Hub-Interfaces, back

1 3 x RJ50 (powered / unpowered, adjustable)

Confidential External

01750365615 B

3-3

Description

3.2

3.2 Dimensions

Figure3-4: Dimensions DA53 I/O Hub

Confidential External

01750365615 B

3-4

Description

3.3

3.3 AC Power Adapter

Figure3-5: AC power adapter

1DC power out 2Power indicator

3AC power adapter 4AC power plug

The external power supply is applicable for common line voltage.

It automatically adjusts itself to the particular voltage.

Confidential External

01750365615 B

3-5

Description

3.4

3.4 LAN Port LED Indications

NOTE

USB 3.1 Gen 2 devices can only be used for data storage.

We strongly recommend that you connect USB 3.1 Gen 2 devices to USB

3.1 Gen 2 ports for faster and better performance from your USB 3.1 Gen 2 devices.

Due to the design of the Intel® 300 series chipset, all USB devices connected to the

USB 2.0 and USB 3.1 Gen 2 ports are controlled by the xHCI controller. Some legacy

USB devices must update their firmware for better compatibility.

Confidential External

01750365615 B

3-6

Description

3.5

3.5 Technical Data

NOTE

Maximum load

Please note that a maximum load of 105 W is permitted for each combination of inter-

face connections.

Table3-1: Technical Data

Port Description

USB ports: 1 x USB type C 3.0 DFP (with PD 5 V/12 V and DisplayPort support)

1 x USB type C 3.0 DRP (uplink connection to the system with PD 5 V/24 V)

2 x USB-A 3.0 connections

PUSB connections 1 x powered USB 2.0 12 V

1 x powered USB 2.0 24 V for external printer use

COM port 3 x RJ50 connectors (power is applied/power is not applied, adjustable)

LAN connection 1 x LAN 10/100/1000 Mbit

Cash drawer 1 x till drawer (supports 12 V/24 V)

DC jack 24 V power supply connector

Confidential External

01750365615 B

3-7

Description

3.5.1

3.5.1 Total Available Power

The total output available for the external I/O ports depends on the power of the power supply unit used.

Below is the Diebold Nixdorf approved AC adapter for the DA53 Multi I/O Hub.

Table3-2: Total power available

Part number Model name Rated power Total power available

External I/O interfaces

1750266555 ADC029-280G 120 W 105 W

Type Port name Voltage Current strength Max. total power consumption (W)

USB 3.0 USB1 5 V 0.9 A

105 W

USB 2 5 V 0.9 A

USB Type C

USB C

DFP

5 V 3A

12 V 3 A

USB C

DRP

5 V 3A

24 V 4 A

Powered

COM

COM 5

COM 6

COM 7

5 V 1 A (combined)

12 V 1 A (combined)

Powered

USB

PUSB 12 V 12 V 3.0 A

PUSB 24 V 24 V 3.0 A

Confidential External

01750365615 B

3-8

4

4 Installation

NOTE

External installation

The I/O hub can be used without a stand. The 3.0 m USB-C cable can be used and con-

nected to the system.

4.1

4.1 Mount hub to stand

Figure4-1: Secure I/O hub with two screws

1. Place the I/O hub on the stand as shown.

2. Mount the I/O hub to the stand (1) using two

M3x4 screws.

Figure4-2: Connect the cable

3. Connect the USB-C cable to the I/O hub (1).

4. Connect all other required cables to the I/O

hub.

5. Route the cable along the side brace up to the

system.

Confidential External

01750365615 B

4-1

Installation

1

Figure4-3: Cover on hub

6. Place the cover (1) on the I/O hub from

above.

Confidential External

01750365615 B

4-2

Page is loading ...

Diebold Nixdorf DA53 Operating instructions

Related papers

Other documents