Diebold Nixdorf EPC 7G Operating instructions

Brand: Diebold Nixdorf

Model: EPC 7G

Type: Operating instructions

Diebold Nixdorf EPC 7G

is a versatile and powerful device that offers a wide range of capabilities to meet your needs. With its compact size and sleek design, the EPC 7G is perfect for use in a variety of settings, from home offices to large businesses.

Some of the key features of the EPC 7G include:

High performance: The EPC 7G is powered by a quad-core processor and 8GB of RAM, providing plenty of power for even the most demanding tasks.
Versatile connectivity: The EPC 7G offers a variety of connectivity options, including Gigabit Ethernet, USB 3.0, and HDMI. This makes it easy to connect to a variety of devices, including monitors, printers, and storage devices.

Diebold Nixdorf EPC 7G

Some of the key features of the EPC 7G include:

High performance: The EPC 7G is powered by a quad-core processor and 8GB of RAM, providing plenty of power for even the most demanding tasks.
Versatile connectivity: The EPC 7G offers a variety of connectivity options, including Gigabit Ethernet, USB 3.0, and HDMI. This makes it easy to connect to a variety of devices, including monitors, printers, and storage devices.

EPC 6G

Operator Manual

01750304871A

This document contains proprietary information of Diebold Nixdorf, Incorporated or its subsidiaries (col-

lectively “Diebold Nixdorf”) and may include information that is protected by copyright, trademark and

patent laws in the US, Germany, and globally. All rights, including rights created by patent grants or reg-

istration of a utility model or design, are reserved.

•No part of this document may be translated, reproduced, stored in a retrieval system, or trans-

mitted, in any form or by any means: electronic, mechanical, photocopying, recording, or oth-

erwise, without prior written permission from Diebold Nixdorf. Any violations of the foregoing

may give rise to a claim for damages.

•If the document pages state the information is confidential (or words of similar import), then

this document is intended solely for the use of the employees or other personnel of Diebold

Nixdorf unless expressly authorized in writing by Diebold Nixdorf. Other uses of this informa-

tion without the express written consent of Diebold Nixdorf are prohibited.

•This document should be treated as confidential material for security reasons. Any unautho-

rized disclosure or use of confidential material may violate the U.S. Theft of Trade Secrets

provisions of Section 1832 of Title 18 of the United States Code as well as comparable laws in

other jurisdictions throughout the world, and may be punishable by fine and imprisonment.

This document and the information contained herein are provided AS IS AND WITHOUT WAR-

RANTY. In no event shall Diebold Nixdorf or its suppliers be liable for any special, indirect, or

consequential damages of any nature resulting from the use of information in this manual. The in-

formation contained in this document is subject to change without notice. When using the document for

system implementation, please call your authorized Diebold Nixdorf sales or service representative for

any applicable changes.

Any trademarks, service marks, product names or company names not owned by Diebold Nixdorf, that

appear in this document are used for informational purposes only, and Diebold Nixdorf claims no rights

thereto, nor does such use indicate any affiliation with or any endorsement of Diebold Nixdorf or Diebold

Nixdorf products by the owners thereof.

Your use of this document and/or any of the information contained herein constitutes your agreement to

all of the terms stated on this page.

01750304871A ii

Table of contents

1Manufacturer´s Certification .......................................................................................... 1-1

2Important notes............................................................................................................... 2-1

2.1 ESD................................................................................................................................... 2-1

2.2 System maintenance ........................................................................................................ 2-1

2.3 Safety instructions............................................................................................................. 2-1

2.4 Recycling .......................................................................................................................... 2-2

3Introduction ..................................................................................................................... 3-1

3.1 About This Manual ............................................................................................................ 3-1

4Installation and commissioning .................................................................................... 4-1

4.1 Before switching on........................................................................................................... 4-1

5Wiring the EPC ................................................................................................................ 5-1

5.1 Basic setting...................................................................................................................... 5-2

6External view ................................................................................................................... 6-1

6.1 Interfaces .......................................................................................................................... 6-2

6.1.1 On/Off button .................................................................................................................... 6-2

6.1.2 DP1, DP2, DP3 ................................................................................................................. 6-2

6.1.3 USB (Universal Serial Bus) A 2.0, 3.0 .............................................................................. 6-2

6.1.4 LAN1, LAN2 ...................................................................................................................... 6-3

6.1.5 3.5 mm jack bush (In/Out/microphone)............................................................................. 6-3

6.1.6 Light emitting diode(s)....................................................................................................... 6-4

7Equipment options ......................................................................................................... 7-1

7.1 DVD drive.......................................................................................................................... 7-1

7.2 Switch-on button and LED ................................................................................................ 7-1

7.3 Additional USB interfaces ................................................................................................. 7-3

8Inside view....................................................................................................................... 8-1

9Disengaging cables ........................................................................................................ 9-1

10 Setting up the device...................................................................................................... 10-1

10.1 Vertical installation ............................................................................................................ 10-2

11 Opening the EPC_6G...................................................................................................... 11-1

12 Putting into service......................................................................................................... 12-1

13 Appendix.......................................................................................................................... 13-1

13.1 Technical Data .................................................................................................................. 13-1

13.2 Interfaces (N1/N2 motherboard) ....................................................................................... 13-2

13.3 Nominal connected load interfaces................................................................................... 13-2

13.4 Motherboard...................................................................................................................... 13-3

01750304871A iii

Table of contents

01750304871A iv

1 Manufacturer´s Certification

This device meets the requirements of the EU Guidelines 2014/30/EU "Electromagnetic

Compatibility" and 2011/65/EU "Restriction of Hazardous Substances".

For this, it bears the CE label on the rear side or the icon is printed on the packaging.

The device is approved for use in North America

(USA, Canada).

01750304871A 1-1

2 Important notes

The device may be repaired only by authorized qualified personnel. Improper repairs will

lead to the loss of any liability claims.

2.1

2.1 ESD

Sub-assemblies with ElectroStatic Discharge-sensitive components (ESD) can be marked

with this label.

When installing sub-assemblies or modules, please observe the following information that applies to all

sub-assemblies with ESD:

• Ensure that the device is disconnected from the power supply before you plug in, unplug or install

sub-assemblies with ESD.

• Always use anti-static equipment (anti-static mat with ground cable with integrated leakage resis-

tance of 1 Mohm, anti-static armband with connection to the mat, anti-statically equipped tools). The

anti-static mat must be connected to a suitable grounding point via the leakage resistance. Pull the

power plug before you plug in, unplug or install sub-assemblies with ESD.

• Place all sub-assemblies with ESD on a suitable anti-static base.

• Touch sub-assemblies with ESD only at their edges and do not touch any components.

• Do not touch any connector pins or conductor paths on an electrostatic-discharge-sensitive assem-

bly.

2.2

2.2 System maintenance

2.3

2.3 Safety instructions

The EPC_G6 corresponds to the pertinent safety precautions pertaining to data processing facilities.

• If this device is moved from a cold environment into its working environment, condensation may oc-

cur. The device must be absolutely dry prior to commissioning, therefore allow for an acclimatization

time of at least two hours before putting it into operation.

• The device must be fully disconnected from the supply voltage when performing any work at the de-

vice and when inserting or removing data cables.

• The EPC_6G is permitted to be connected only to a power supply unit certified in accordance with

IEC/ENUL 60950-1 or IEC/EN/UL 62368-1. Ensure that the power supply unit is compatible to the

power requirements of the EPC mentioned in chapter “Appendix, Technical Data”. The power supply

unit used must be approved for a use of up to 5000 m (16,404 feet) above sea level.

• USB devices (e.g. monitor, devices connected via LAN) may be connected to the EPC or removed

from it during ongoing operations if these devices comply with the specifications pursuant to usb.org.

01750304871A 2-1

Important notes

• Before you begin any assembly work on the device, you should discharge yourself, e.g. by touching a

grounded object.

• Please make sure that no objects (e.g. paperclips) are able to enter the inside of the device, as this

may result in electrical shocks or short circuits.

• Keep the air slots of the device free to ensure proper ventilation and please observe the installation

instructions for the EPC. This prevents excessive increases in temperature.

• No data cables may be plugged in or unplugged during storms.

• Protect the device against vibrations, dust, moisture and heat.

• Please guarantee the environmentally friendly disposal of used parts, for example the battery.

• In the event of emergencies (e.g. damaged housing or damaged power cable, penetration of liquids

or foreign bodies), switch the device off immediately, pull the power plug and inform Technical Cus-

tomer Service at Diebold Nixdorf or the authorized service partner of your dealer.

• An explosion hazard exists if the lithium battery of the device is replaced incorrectly. Only identical

batteries or other types recommended by the manufacturer are permitted to be used to replace the

lithium battery.

• Your EPC system is the result of state-of-the-art technical innovation. Please ensure therefore

equally state-of-the-art constructional and technical ambient conditions to permit flawless and effi-

cient functioning of the system.

• When replacing a storage medium, please ensure that you use only storage media authorized or rec-

ommended by Diebold Nixdorf.

2.4

2.4 Recycling

This product was designed in accordance with our internal standard "Environmentally friendly product

design and development".

The system is manufactured without the use of CFC and CHC and the majority of the components and

materials used in its manufacture are recyclable.

You are helping us with the recycling if you do not attach any labels to the device.

For materials which currently cannot be used for a new purpose, Diebold Nixdorf offers environmentally

friendly disposal at a recycling center that is certified in accordance with ISO 9001 and ISO 14001.

If your system can no longer be used, please send it in for this environmentally friendly and contempo-

rary form of recycling.

Additional information about returns, recycling and disposal of our products can be obtained from your

responsible branch office or from our recycling center in Paderborn.

mailto:[email protected]

We look forward to your E-mail.

01750304871A 2-2

3 Introduction

The EPC_6G is a high-performance system for multifunctional solutions. A powerful and energy-efficient

processor technology ensures a rapid handling of all processes.

The EPC_6G is equipped with a large number of standard PC interfaces for connecting the periphery de-

vices. The type and number of the interfaces ensures very flexible modifications.

The selection of the software is not limited to a particular product. This provides you with a considerable

degree of flexibility when structuring the configuration.

No matter which configuration you need: Diebold Nixdorf offers the suitable solution. This means that

when you wish to expand your EPC_6C, please contact a branch of Diebold Nixdorf or your retailer.

3.1

3.1 About This Manual

NOTE

Notes in the manual are marked by this symbol

CAUTION

Attention notifications are identified by this sign.

As the type and scope of the application programs depend on the specific individual choice of each cus-

tomer, this manual will not address any detailed issues pertaining to software. Dedicated manuals are

available for the peripherals that can be connected. These devices will therefore not be described in

greater detail here. Please inform yourself by consulting the respective manuals on the Internet.

01750304871A 3-1

4 Installation and commissioning

4.1

4.1 Before switching on

Unpack the parts and check whether the scope of supply correspond to the tasks listed on the delivery

note.

If you should you detect any

• transport damage or inconsistencies between package content and the bill of delivery or function de-

fects,

inform your Diebold Nixdorf sales outlet immediately. Please specify delivery note number, delivery note

item number and serial number of the affected device when doing so. The serial number is located on

the label shown here on the front side of the housing.

1Label

The serial number is located on the label below the barcode.

01750304871A 4-1

Installation and commissioning

NOTE

Please do not fail to check the function of the original device before making changes (e.g.

by installing an extension board). Only then may a functional deficiency be recognized as

grounds for complaint.

NOTE

We recommend that you keep the original packaging for any subsequent transport that

may become necessary (protection against jolts and impact).

01750304871A 4-2

5 Wiring the EPC

All of the devices belonging to the system that have a separate power cable must be connected to the

same electric circuit.

• Please ensure that all data cables are plugged in at the system unit and that the peripherals are

plugged in.

• Plug one end of the power supply cable into the EPC socket on the rear of the device.

• Plug the power supply cable into the socket of a power supply unit.

1Voltage cable port (DC in)

2On/Off switch

01750304871A 5-1

Wiring the EPC

Pin assignment DC in

PIN Signal

1 12 V

2 12 V

3 PC-ON (Pushbutton Signal)

4 GND

5 GND

6 GND

To switch the device on and off, briefly switch the On/Off button on the rear side of the device.

When the EPC is installed in an ATM, the ATM system will manage the power state of the ATM. The

power button will not need to be pressed. If this button is pressed to power down the EPC, then entire

ATM will also be powered down.

CAUTION

Never plug in data or power supply cables when the system is switched on!

5.1

5.1 Basic setting

The EPC is configured in accordance with the order when it leaves the factory.

01750304871A 5-2

6 External view

Front view

Rear view

01750304871A 6-1

External view

6.1

6.1 Interfaces

12 x USB 2.0 (for Service personnel only) 2DC in (power supply connector)

3On/Off button 4DP1, DP2, DP3

52x USB 3.0 6LAN2

72 x USB 3.0 8LAN1/AMT

93 x jack bush 3.5 mm (1.38")

6.1.1

6.1.1 On/Off button

If the power supply unit is powered, then the system is switched on by pressing the On/Off button.

6.1.2

6.1.2 DP1, DP2, DP3

The DPx interfaces can be used to connect high-resolution LCD monitors and to transmit video signals

with a max. resolution of max. 4096 x 2304@60 Hz.

Screens can be attached to DP1, DP2 or DP3.

6.1.3

6.1.3 USB (Universal Serial Bus) A 2.0, 3.0

You can connect a variety of USB peripheral devices to these ports (USB-A), e.g. separators, receipt

printers or monitors. USB can provide the required power for devices with low wattage such as phones

or keyboards.

NOTE

Connect only devices and cables which correspond to the valid USB standard specifica-

tions.

01750304871A 6-2

External view

6.1.4

6.1.4 LAN1, LAN2

The cable for the connection to a network (LAN) is plugged in here. The LAN1/AMT interface supports

Active Management Technology (AMT). AMT is available as an orderable option for the EPC_6G. AMT

is not available as an upgrade. AMT enables administration of the system without support of the operat-

ing system.

LEDs

Left LED Constant green Network connection established

Flashes green Data transfer

Right LED off 10 MBit

Constant green 100 MBit

Constant orange 1000 MBit

NOTE

Use only shielded LAN cables marked with CAT5 or CAT5e (for 1000 MBit). These offer

greater protection against malfunctions in the network.

6.1.5

6.1.5 3.5 mm jack bush (In/Out/microphone)

Audio devices such as headphones, loudspeakers and microphones can be connected to these ports.

The three sockets are mechanically identical, although they differ in their function. The blue socket (Line

In) is an audio input. External audio sources can be connected here. The green socket (Line Out) is an

audio output. Headphones or loudspeakers can be connected here. Finally, a microphone can be con-

nected to the pink socket (Mic).

You can adjust the required volume through the software in the operating system or through the operat-

ing system itself (for example, the Windows operating system features a small loudspeaker symbol on

the taskbar which can be used to control the volume).

01750304871A 6-3

External view

6.1.6

6.1.6 Light emitting diode(s)

The light emitting diode on the rear of the system shows the following:

LED lights red Read or write access on HDD/SSD

LED lights green Device is switched on (S0)

The light emitting diodes (optional) at the front of the system are marked:

LED lights up yellow Read or write access on HDD/SSD

LED lights green Device is switched on (S0)

LED flashes green Standby (S3)

01750304871A 6-4

7 Equipment options

The following equipment options are available for the EPC:

• DVD drive

• Switch-on button and LED on the front side

• Two USB2.0 sockets on the front side of the device

• Installation option of a PCle board

• 2nd HDD or hard disk (see Storage media)

7.1

7.1 DVD drive

An installed DVD drive is optionally available to you. This can be installed on the front side or on the

rear side.

1DVD drive (rear side)

7.2

7.2 Switch-on button and LED

The installation of a switch-on button and the LED on the front side of the device is available to you as a

possible option.

01750304871A 7-1

Equipment options

1Switch-on button 2LED

01750304871A 7-2

Equipment options

7.3

7.3 Additional USB interfaces

Two additional USB2.0 interfaces are optionally available which have been installed according to prefer-

ence at either the front or rear side. They are intended exclusively for Service work.

12x USB 2.0 interfaces (front side)

22x USB 2.0 interfaces (rear side)

01750304871A 7-3

8 Inside view

1Housing cover 2DVD drive (optional)

3USB (optional) 4HDD including holder

5Fan 6Air duct

7Cooling element 8ON/OFF switch at front (optional)

9Motherboard 10 Connector side

01750304871A 8-1

Page is loading ...

Diebold Nixdorf EPC 7G Operating instructions

Brand: Diebold Nixdorf

Model: EPC 7G

Type: Operating instructions

Diebold Nixdorf EPC 7G

Some of the key features of the EPC 7G include:

High performance: The EPC 7G is powered by a quad-core processor and 8GB of RAM, providing plenty of power for even the most demanding tasks.
Versatile connectivity: The EPC 7G offers a variety of connectivity options, including Gigabit Ethernet, USB 3.0, and HDMI. This makes it easy to connect to a variety of devices, including monitors, printers, and storage devices.

Download PDF

report

Diebold Nixdorf EPC 7G Operating instructions

Diebold Nixdorf EPC 7G Operating instructions

Related papers

Other documents