Deagostini MIG 29 Operating instructions

Brand: Deagostini

Model: MIG 29

Type: Operating instructions

PACK 8PACK 8

STAGE PAGE

36 Forward starboard fuselage frame 91

37 Fuselage nose bottom frame 93

38 Port afterburner fairing 96

39 Port afterburner nozzle 98

40 Port afterburner 100

Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.

Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.

Warning: Not suitable for children under the age of 14.

is product is not a toy and is not designed or intended for use in play.

Items may vary from those shown.

Your parts

D060 - Forward starboard fuselage frame

BM screws (25 pcs.)

Stage 36:

Forward starboard

fuselage frame

Assembly

D060

1 Connect the forward starboard fuselage frame

(D060) to the rest of the forward fuselage frame,

aligning the holes of both. Secure them together with

two BM screws.

D058D060

D011

2 Align the holes of the forward fuselage frame to those of the middle frame, as shown. Secure the parts with 10 BM

screws, following the sequence shown.

3 Here is how the fuselage should look now.

4 Fix the upper part of the fuselage removed in Stage 31 (D011) to the top of the middle fuselage frame using eight

BM screws. This stage is now complete.

D052

D058 D056











Your parts

1. D061 - Fuselage nose

bottom frame

2. D062 - Bracket

3. D063 - Bar

BM screws

SM screws

MM screws

Stage 37: Fuselage nose

bottom frame

Assembly

CM MM

D061

D062

D063

1 Place the bar (D063) in the indicated position in the fuselage

frame and secure there with two BM screws. You may want to

remove the antenna before ﬁtting the bar.

2 Fix the bracket (D062) on the inside of

the nose, as shown, with a BM screw.

D063

D001

D062

3 Insert the fuselage frame into the nose of the fuselage, pressing it in on both sides. The frame should be ﬂush with

the edge of the fuselage.

4 Press the frame into the fuselage, in the gap between the bracket and the sidewalls, as shown.

5 Secure the

frame to the

fuselage with

two MM

screws.

D060D001

D059

D057

D061

D053

D061

D054

D061

6 Place the fuselage nose bottom frame (D061) over

the bottom of the nose frame. Secure in place with

six MM screws.

7 Secure the end of the frame with four BM screws,

as shown.

8 Fix the stringer (D053) to the underside of the

fuselage frame, aligning the holes at either end.

Tighten a CM screw into each of the holes.

9 Then ﬁx the stringer (D054) onto the other side

of the frame with two CM screws. This stage is now

complete.

Your parts

1. P095 - Afterburner ﬂange.

2. P101 - Fairing ﬂaps (6 pcs.)

FP screws (15 pcs.)

Stage 38:

Port afterburner fairing

P101

P095

Assembly

1 Fix the six fairing ﬂaps (P101) to the afterburner ﬂange (P095) using two FP screws per ﬂap, as shown.

P101

Your parts

1. P102 - Afterburner

ducting.

2. P108 - Afterburner

nozzle (6 pcs.).

3. P110 - Cap.

FP screws

Stage 39:

Port afterburner nozzle

Assembly

P108

P110

P102

1 Fix one of the afterburner nozzle pieces (P108) onto the afterburner ducting (P102) with an FP screw.

P102

P108

2 Continue to ﬁt the rest of the afterburner nozzle parts to the duct.

100

Your parts

P109 - Afterburner.

FP screws

GP screws

Stage 40:

Port afterburner

Assembly

FP GP

P109

1 For this stage you will need

the assemblies form Stages

38 and 39, as well as the

part and screws supplied

with this stage. Insert the

afterburner duct (Stage 39)

inside the nozzle ﬂaps and

into the ﬂange (Stage 38).

P101P102

101

2 Place the afterburner

(P109) onto the afterburner

duct. Secure it in place with

a GP screw.

3 Secure the afterburner

(P109) to the ﬂange with

three FP screws, as shown.

P109

P095

Deagostini MIG 29 Operating instructions

Deagostini MIG 29 Operating instructions

Deagostini MIG 29 Operating instructions

Related papers

Other documents