Deagostini MIG 29 Operating instructions

Brand: Deagostini

Model: MIG 29

Type: Operating instructions

PACK 18PACK 18

STAGE PAGE

86 Port lower fuselage panel 206

87 Starboard lower fuselage panel 208

88 Starboard lower fuselage panel 210

89 Port wing frame 212

90 Port wing ribs 214

Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.

Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.

Warning: Not suitable for children under the age of 14.

is product is not a toy and is not designed or intended for use in play.

Items may vary from those shown.

206

Stage 86: Port lower

fuselage panel

Your parts

1. D092 - Port lower fuselage panel

2. Р046 - Landing gear ﬂap

DM, FM and HM screws

Assembly

1 Retrieve the

assembly from

the previous stage.

Carefully remove

the previously

installed part P046.

2 Then install the new

part P046 supplied

with this stage.

P046

D092

DM FM HM

P046

207

3 Fix parts D091 and

D092 together with

two FM screws.

4 Make sure there are

no screws in these

two indicated holes.

5 Fit the two panels

on the rest of the

fuselage, as shown.

6 Secure the panels

with ﬁve DM screws

and two HM

screws.

D091D092

D092 D091

HMHM

208

Stage 87: Starboard

lower fuselage panel

Your parts

1. D093 - Landing gear ﬂap

2. Р229 - Mounting plate

3. P230 - Mounting plate

4. D094 - Starboard lower fuselage panel

FM screws

D093

P229

D094

P230

209

Assembly

1 Insert the landing

gear ﬂap (D093)

into the starboard

lower fuselage

panel (D094),

as shown.

D094

P229

P230

D093

D094

2 Fix mounting plate

(P229) over the

front of the ﬂap

with a FM screw.

3 Secure the second

mounting plate

(P230) over the

rear of the ﬂap

with another

FM screw.

210

Stage 88: Starboard

lower fuselage panel

Your parts

1. D095 - Starboard lower

fuselage panel

2. Р056 - Landing gear ﬂap

DM, FM and HM screws

Assembly

1 Retrieve the lower fuselage

assembly. Carefully remove the

previously installed part P056.

2 Then install the new part P056

supplied with this stage.

P056

D095

P056 DM FM HM

211

3 Fix panels D091 and D092

together with two FM screws.

4 Make sure there are no screws

in these two indicated holes.

5 Fit the two panels on the rest of

the fuselage, as shown.

6 Secure the panels with ﬁve

DM screws

7 Then tighten two HM screws

into the indicated holes.

D095

D094 D095

212

Stage 89:

Port wing frame

Your parts

1. D096 - Port wing frame

2. D097 - Hydraulic jack

3. P231 - Hydraulic hinge

FM and MM Screws

D096

P231

D097

213

Stage 89:

Port wing frame

Assembly

1 Insert the hydraulic jack (P231) into the hinge(D097), as shown and secure them together with an MM screw.

2 Then secure the hinge to the port wing frame (D096) with an FM screw.

P231 D097

D097 D096

214

Stage 90:

Port wing ribs

Your parts

1. P232 - Rib

2. P233 - Rib

3. P234 - Rib

Assembly

1 Prepare the port wing assembly from the previous stage. Take rib (P232) and place it over the spars at the deepest

point of the wing frame.

P232

D096

P232

P233

P234

215

2 Then install rib (P233) in the next available slots in the port wing.

3 Install the last rib (P234) into the next slots in the wing.

D096

P233

P234

Deagostini MIG 29 Operating instructions

Deagostini MIG 29 Operating instructions

Deagostini MIG 29 Operating instructions

Related papers

Other documents