Deagostini MIG 29 Operating instructions

Type
Operating instructions
PACK 20
STAGE PAGE
96 Port wing pylons 231
97 Port wing aileron 233
98 Port wing ap 235
99 Starboard wing frame 238
100 Starboard wing ribs 240
Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.
Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.
All rights reserved © 2021
Warning: Not suitable for children under the age of 14.
is product is not a toy and is not designed or intended for use in play.
Items may vary from those shown.
231
Stage 96:
Port wing pylons
Your parts
1. Р251 - Port wing under panel
2. Р252 - Fairing
3. D103 - Plug (3 pcs.)
4. D106 - Plug (3 pcs.)
CM screws
MM screws
OM screws
Assembly
1 For this stage you will need the parts from
this stage and Stage 95. Install the fairing
(P252) to the port wing under panel (P251),
as shown.
P252 D103 D106
OM
MM
CM
P251
2 Install plugs (D103) and (D106) on pylons (D100), as shown.
Fix them in place with OM screws.
P251
P252
D103
D103
D103
D106
D100
D100
D100
D106
D106
232
D100 D100 D100
P251
P251
P251
3 Then install the
pylons (D100) on
the port wing under
panel (P251) in the
postition shown.
4 Fix the pylons from
inside of the panel
with MM screws.
5 Secure the fronts of
the pylons with three
more CM screws.
233
Stage 97:
Port wing aileron
Your parts
1. Р253 - Aileron lower half
2. P254 - Aileron upper half
3. D107 - Jack
4. D108 - Hinge
NM screws
QM screws
LP screws
Assembly
1 Prepare the parts from Stage 96. Connect
the aileron lower (P253) and upper (P254)
halves and secure them with two LP screws.
Then fix the hinge (D108) to the aileron with
two LP screws.
2 Then mount the assembled aileron onto the left
wing assembly.
P253
D108
P253
D096
P253 P254
D107
D108 NM LP
QM
P254
234
3 Install the port wing
under panel onto
the wing assembly.
For ease of
installation, you may
want to first remove
the fairing to pass
the hydraulic jack
through the aileron.
4 Secure the panel to
the wing with nine
NM screws.
5 Secure the end of the
jack to the hinge with
a QM screw.
P231
D107
D096P251
D108
P231P251
235
Stage 98:
Port wing flap
Your parts
1. Р255 - Lower flap half
2. Р256 - Upper flap half
3. D109 - Shaft housing
4. D110 - Shaft housing
LP screws
RM screws
Assembly
1 For this stage you will need the
parts supplied with stage and
Stages 97 and 88. Secure the
two halves of the flap together
with two LP screws.
2 Then install shaft housing (D109) to the underside of the wing with two
LP screws.
P255
P256
D109
P255
D109
D110
LP RM
P256
236
P255
P255D110
D109
3 Install the
assembled flap
into the housing.
4 Then fit shaft
housing (D110)
onto the shaft
of the flap and
secure to the
wing with two
LP screws.
5 Connect the
electrical wiring
from the wing to
the main fuselage.
237
D012
D111
6 Then carefully
place the wires
in the fuselage.
7 Carefully connect
the wing to the
fuselage, as shown.
8 Then fix the
wing to the
fuselage
with three
RM screws.
238
1 Insert the hydraulic jack
(P257) into the hinge
(D112). Secure with an
MM screw.
Stage 99:
Starboard wing frame
Assembly
Your parts
1. D111 - Starboard wing frame
2. D112 - Hydraulic hinge
3. Р257 - Hydraulic jack
FM screws
MM screws
D112
P257
FM MM
P257 D112
D111
239
D111
D112
2 Then secure the hinge to the wing frame with and FM screw.
D111
D112
240
1 Prepare the
starboard wing
frame from the
previous stage.
Fit the first rib
(P259) into the
spars of the
wing frame.
Stage 100:
Starboard wing ribs
Assembly
Your parts
Р258 - Ribs
Р259 - Ribs
Р260 - Ribs
P258
P259
P260
D111
P259
241
2 Then install the second rib (P260) in place in the right wing frame.
3 Fit the last rib (P258) into place on the wing frame.
D111
D111
P260
P258
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Deagostini MIG 29 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI