Deagostini MIG 29 Operating instructions

Brand: Deagostini

Model: MIG 29

Type: Operating instructions

PACK 14PACK 14

STAGE PAGE

66 Lower fuselage section 155

67 Port mainwheel door 157

68 Starboard mainwheel door 159

69 Landing lights 161

70 Port engine cover 163

Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.

Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.

Warning: Not suitable for children under the age of 14.

is product is not a toy and is not designed or intended for use in play.

Items may vary from those shown.

155

Stage 66: Lower

fuselage section

Assembly

Your parts

1. P192 - lower fuselage

section

2. P193 - air intake.

3. P194 - air intake.

KP screws

DM screws

1 Place the two air intakes

(P194 and P193) onto the

lower fuselage section, at the

positions indicated

P194

P192

KP DM

P193

P194

P193

P192

156

2 Carefully connect the

lower fuselage section

(P192) to the assembly

from Stage 65.

3 Turn the assembly

over and secure the

parts together with

four KP screws.

4 Then, secure the parts

from the outside with

two DM screws.

P192

D076

157

Your parts

1. D077 - Port mainwheel door

2. P195 - locking plate

3. P196 - locking plate

MP screws

P195

D077

P196

Stage 67: Port

mainwheel door

158

Assembly

1 Place the port

mainwheel door (D077)

in the side of the lower

fuselage assembly, as

shown, engaging the

pins of the door with the

corresponding grooves

in the fuselage.

D077

P196P184

P192

P192P195

2 Fix the ﬁrst locking plate

(P195) over the door

pin, as shown, with two

MP screws.

3 Install the second

locking plate (P196)

over the pin at the other

end of the door. Secure

with two MP screws.

159

Stage 68: Starboard

mainwheel door

Your parts

1. D078 - Starboard mainwheel door

2. P197 - locking plate

3. P198 - locking plate

MP screws

P197

D078

P198

160

Assembly

1 Place the starboard

mainwheel door (D078)

in the side of the lower

fuselage assembly, as

shown, engaging the

pins of the door with the

corresponding grooves

in the fuselage.

D078

P197

P198

P189P192

P192

2 Fix the ﬁrst locking plate

(P197) over the door

pin, as shown, with two

MP screws.

3 Install the second

locking plate (P198)

over the pin at the other

end of the door. Secure

with two MP screws.

161

Stage 69: Landing lights

Assembly

Your parts

1. P200 - Landing light housing (2 pcs.)

2. X015 - LED

3. X016 - LED

4. P202 - Brackets (2 pcs.)

FM screws

SM screws

1 Retrieve the lower fuselage assembly from the previous stage. Install a landing light housing (P200) on the inside of

the port mainwheel door, as shown in the picture and secure it with an SM screw.

X015

X016

P200

P202

2 Then insert the LED

(X015) into the hole in the

landing light housing.

D077 X015

P200 P200

162

3 Fix the LED wiring to the

inside of the door with

a bracket (P202) and an

FM screw.

4 Install the landing light

housing (P200) on the

inside of the starboard

mainwheel door.

Secure in place with

an SM screw.

5 Then insert the LED

(X016) into the hole

in the housing.

6 Fix the LED wiring on

the inside of the door

with a bracket (P202)

and an FM screw.

D077P202

P200

P202

P200

D078

X016

163

Stage 70: Port engine

cover

Your parts

1. P203 - Port engine cover

2. P204 - air intake

IP screws

P203

P204

164

Assembly

1 Fit the air intake

(P204) onto the

port engine cover

(P203), as shown.

Align the pins with

the holes and then

press into place.

2 Then connect the lower fuselage assembly and the port engine cover (P203) together, as shown. Fix the pieces

together with two IP screws as shown.

P203

P192

P203

P204

Deagostini MIG 29 Operating instructions

Deagostini MIG 29 Operating instructions

Deagostini MIG 29 Operating instructions

Related papers

Other documents