Page is loading ...
PackPack
1616
STAGE PAGE
76 Caravan parts 258
77 Rear inner caravan wall 261
78 Front inner caravan wall 264
79 Front caravan window 267
80 Right sunvisor 270
Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.
Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.
All rights reserved © 2020
Warning: Not suitable for children under the age of 14.
is product is not a toy and is not designed or intended for use in play.
Items may vary from those shown.
258
Your parts:
76A. Rearview mirror holder
76B. Rearview mirror housing
76C. Rearview mirror
76D. Caravan license plate light
76E. Caravan license plate
AP. 1.7 x 3mm screws
HP. 1.5 x 3 x 2.5mm screws
LP. 1.2 x 3mm screws
Stage 76: Caravan parts
259
2Secure the assembly with an LP screw.
1Insert the shorter end of the rearview mirror holder (76A) into the
hole in the rear of the mirror housing (76B).
3Remove the backing from the rearview mirror (76C). 4Align the rearview mirror with the rearview mirror housing and
press into place.
260
7Secure the caravan license plate (76E) underneath the light with
two HP screws.
Here is how your assembly should look at the end of this stage. Keep any
assemblies, unused parts and spares labelled to one side for later use.
5 Insert the caravan license plate light (76D) into the two indicated
holes in the rear of the caravan. 6Secure the license plate light with two AP screws from the inside
of the caravan.
261
Your parts:
77A. Interior light
77B. Rear inner caravan wall
IP. 2 x 4mm screws
Stage 77: Rear inner caravan wall
262
2Lead the caravan rear lights cable along the back wall, as shown.
Make sure it is not in the way of any holes. The ends should bend
away from the lights at 90 degrees.
1Insert the rearview mirror holder into the hole in the interior
light (77A).
3Mount the rear inner caravan wall (77B) onto the inside of the
rear wall. 4Secure the inner wall with five IP screws.
263
Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.
264
Your parts:
78A. Roof inner
78B. Front inner caravan wall
FP. 2 x 3mm screws
Stage 78: Front inner caravan wall
265
2Fit the front inner caravan wall (78B) into the front of the caravan,
aligning the holes of both parts.
1 Install the interior light and mirror into the recess at the front
of the roof inner (78A).
3Turn the caravan over and connect the front inner wall to the
left wall with two FP screws. 4Fix the front wall to the right wall with two FP screws.
266
Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.
267
Your parts:
79A. Left sunvisor
79B. Left sunvisor hinge
79C. Front caravan window
MP. 1.7 x 3 x 2.5mm screws
EP. 1.7 x 2.5 x 5mm screws
Stage 79: Front caravan window
268
2Fix the sunvisor to the roof inner with two MP screws.
1 Install the left sunvisor hinge (79B) into the space in the left
sunvisor (79A).
3Place the front caravan window (79C) on the inside of the
front wall over the opening. Align the corresponding holes
of both parts.
4Secure the window with four EP screws.
269
Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.
270
Your parts:
80A. Right sunvisor
80B. Right sunvisor hinge
80C. Caravan handles
MP. 1.7 x 3 x 2.5mm screws
IP. 2 x 4mm screws
Stage 80: Right sunvisor
271
2Fix the hinge to the roof inner with two MP screws.
1Connect the right sunvisor hinge (80B) with the right
sunvisor (80A).
3Insert the caravan handles (80C) into holes in the front of
the caravan. 4Secure the handles from the inside of the caravan with
IP screws.
272
Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.
/
