Vitek VT-08HD2A-NH User guide

VT-08HD2A-NH
Vitek
Brand
Vitek
Model
VT-08HD2A-NH
Category
Digital Video Recorders (DVR)
Type
User guide

This manual is also suitable for

VITEK
OnCue Series
Advanced CMS
QUICK START GUIDE
OnCue: Advanced CMS Quick Guide
2
1. Installation
Execute it by double-click on the setup file, and the program will start the installation.
Click on Next to continue.
The CMS will be installed in its default folder of “C:\Program Files (x86)\OnCueCMS”. If the folder needs to be changed,
click on “Browse…” button and then select a different folder.
If you select the folder to be installed, click the button to continue.
OnCue: Advanced CMS Quick Guide
3
And the program will start the installation.
You can execute ‘CMS’ immediately by checking the check box, ‘Launch CMS’.
Click the ‘OK’ button to finish the CMS installation.
OnCue: Advanced CMS Quick Guide
4
2. Log-in
2.1 [Administrator’s password]
At first execution, administrator’s password has to be registered and keep the password in mind. You can refer
the below picture. There is no way to recover once if administrator’s password is forgotten.
2.2 [Log-in]
After checking user account and password, CMS loading screen like below appears and CMS is going to be
ready.
OnCue: Advanced CMS Quick Guide
5
DVR INFORMATION: The ‘DVR List’ shows the DVRs registered using the ‘CONNECTION
MANAGER’. On the DVR List panel, you can connect/disconnect the DVR, execute the Player for
the remote searching and playback, and see the status information of DVR.
VIEW LIST: Display the main window and sub window
ü Name : Input the title of sub window
ü ADD : add the sub window (Max.4 window)
ü Delete : deleted the sub window
LIVE MONITOR: The transferred live camera video are monitored in this window,
DVR STATUS: This window shows the health and the status of DVR.
1
2
3
4
OnCue: Advanced CMS Quick Guide
6
2.3 Connection
1.1 Add the DVR (CONNECTION MANAGER)
This provides the way to register the DVR/NVRs into the DVR/NVR list, remove the
DVR/NVR from the DVR/NVR list and editing the DVR/NVR connection information.
DVR Name: The name which you give to the DVR/NVR which has the following
OnCue: Advanced CMS Quick Guide
7
connection information.
DVR Address : specify the IP address of the DVR/NVR
DVR Port: the port number for DVR/NVR connection. The value should be same
as the one specified port number of your DVR/NVR.
USER : user ID to be used in the login
PASSWORD: password for the selected user.
User name and password is case-sensitive.
DVR SCAN: scan the local network and show the detected DVR/NVRs in the list.
Ø MAC Address :show the MAC address of DVR/NVR resulted from scanning
Ø IP Address: show the IP address of DVR/NVR resulted from scanning.
Ø PORT: show the PORT number of DVR/NVR which has the above MAC and
IP address.
Ø NVR Name: show the name of DVR/NVR which has the above MAC and IP
address. This is named as a value of ‘SYSTEM NAME’ under the
‘MANAGEMENT’ page of ‘SYSTEM’ menu.
Ø Re-scan: execute scanning the LAN again.
Ø Add: register the selected DVR/NVR into the DVR/NVR list of CONNECTION
MANAGER.
Ø Add All: register all the scanned DVR/NVR into the DVR/NVR list of
CONNECTION MANAGER.
Ø Close: Close the DVR/NVR SCAN window.
OnCue: Advanced CMS Quick Guide
8
OnCue: Advanced CMS Quick Guide
9
2.4 Connect
Clicking the DVR/NVR name in the DVR/NVR list pops up the menu to
connect/disconnect DVR/NVR or execute the Player for search & playback such
as below picture.
Ø CONNECT: Connect the DVR/NVR selected
Ø DISCONNECT: Dis-connect the DVR/NVR Manager from the DVR/NVR
Ø RUN PLAYER: Execute the Player for the remote search & playback.
Ø DVR WEB MENU: link the DVR/NVR web menu.
Ø REBOOT DVR: Remote reboot the DVR/NVR.
OnCue: Advanced CMS Quick Guide
10
Similarly, you can drag & drop the DVR/NVR from the ‘DVR Information’ window to the ‘Live Monitor’
window as shown in the below screen.
2.5 Add the Sub Window
OnCue: Advanced CMS Quick Guide
11
Name: Input the title of Sub window.
Add: Add the sub window. (Max. 4 window)
Delete: Delete the sub window.
Similarly, you can drag & drop the DVR/NVR from the ‘DVR Information’ window to the ‘Live Monitor’
window as shown in the below screen.
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
VITEK LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. Digital recording and storage products are
also warranted for 3 years except for the hard drives which carry their own independent factory
warranty from the hard drive manufacturer. VITEK warrants to the purchaser that products manufac-
tured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner
intended, will be free of defects in materials and workmanship for a period of three (3) years, or as
otherwise stated above, from the date of purchase by the end user. This warranty is non-transferable
and extends only to the original buyer or end user customer of a Vitek Authorized Reseller.
This warranty shall not apply to repairs or replacements necessitated by any cause beyond the control
of VITEK, including but not limited to, acts of nature, improper installation, excess moisture, misuse,
lack of proper maintenance, accident, voltage fluctuations, or any unauthorized tampering, repairs or
modifications. This warranty becomes VOID in the event of alteration, defacement, or removal of serial
numbers.
Within the first 6 months of purchase, VITEK will replace or credit any defective product at the request
of the customer (subject to availability) with a new product that equals or exceeds the performance
of the original product purchased.
Within the first 6 months of purchase, at its sole discretion, VITEK may issue an advance replacement
for a defective product; however, all related costs including, but not limited to shipping and/or delivery
charges will be the responsibility of the customer. If upon return inspection a product is determined
to be in good working order or shows evidence of misuse, the customer will be responsible for full
payment of the original product purchased as well as the replacement product.
Beyond the first 6 month period for the remainder of the warranty, VITEK’S responsibility shall be
limited to repairing the defective product, including all necessary parts and related labor costs. At its
sole discretion, VITEK may choose to either exchange a defective product or issue a merchandise
credit towards future product purchases. Any replacement parts furnished in connection with this
warranty shall be warranted for a period not to exceed the remaining balance of the original equip-
ment warranty.
A Return Authorization number or “RA” number must be obtained prior to the return of any item for
repair, replacement, or credit. VITEK requires that this “RA” number be clearly printed on the outside
of the shipping carton to avoid refusal of said shipment. The Return Authorization number expires
after 30 days. Products returned after the 30 day period will be subject to refusal. Shipping charges,
if any, must be prepaid. A copy of the bill of sale (or invoice of purchase), together with a complete
written explanation of the problem must accompany all returns.
Vitek makes no warranty or guarantee whatsoever with respect to products sold or purchased through
unauthorized sales channels. Warranty support is available only if product is purchased through a
Vitek Authorized Reseller.
Version 1.0
January 2017
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Vitek VT-08HD2A-NH User guide

VT-08HD2A-NH
Vitek
Brand
Vitek
Model
VT-08HD2A-NH
Category
Digital Video Recorders (DVR)
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents