Vitek VT-16HD2A-NH User guide

Brand: Vitek

Model: VT-16HD2A-NH

Type: User guide

This manual is also suitable for

Vitek On Cue App Quick Guide for iPhone

Use our ‘DVR Networking Guide’ to network your DVR BEFORE attempting to use this

guide!!!

Step 1: Open App Store.

Step 2: Search for ‘Vitek’.

Step 3: Install the ‘Vitek On Cue

Viewer’.

Step 4: Open the On Cue Viewer.

Step 5: Click ‘DVR List’ and select

‘+ New’.

Step 6: Begin by entering a

‘Connection Name’. This can be

any name of your choice.

Step 7: Add the IP Address or

DDNS of your DVR. For example:

12.22.195.26.

Step 8: Enter the Port numbers

from the ‘Network’ page of your

DVR.

Step 9: Enter the ‘User Name’ and

‘Password’ for the DVR. The

default ‘User Name’ is ADMIN and

the default ‘Password’ is 1234

Step 10: Make sure none of the

fields were left blank, then hit

‘Save’.

Step 11: Back at the Viewer DVR

List, You should now see the DVR

you just added. Select it and press

‘Connect’ at the bottom.

Step 12: Connect to your DVR and

enjoy your Hi-Def cameras!

If you have any questions at all about this guide, or if you still haven’t had the chance to

Network your DVR, please checkout our Tech Support FAQ for illustrated guides on

whatever configuration questions you may have.

Tech Support F.A.Q.:

www.vitekcctv.com/Support.asp

VITEK Industrial Video Products, Inc.

Valencia CA, U.S.A.

1
2
3
4
5

Vitek VT-16HD2A-NH User guide

Brand: Vitek

Model: VT-16HD2A-NH

Type: User guide

This manual is also suitable for

Related papers