ViziT BVD-311R Operating instructions

ViziT
Brand
ViziT
Model
BVD-311R
Type
Operating instructions
BVD-311(R)
Doorstation BVD-311(R) is intended for joint operation with Control Unit BUD-301M, BUD-301K,
BUD-302 in multi-apartment doorphones VIZITof Series 300, and provides duplex intercom, keypad codes and
TM-keys (iButton) and RF-keys controller's functions.
The following versions of BVD-311 are available:
Content of the doorphone system, it's features, order of programming and operation are fully described
in Control Unit operating instruction.
SPECIFICATIONS
Capacity: up to 100 subscribers
Operating voltage, VDC 15
Power consumption, W max 2
Dimensions, mm 90x180x28
Weight, kg 0.5
Operating conditions
- ambient temperature range from -40 up to +45°C;
- relative humidity of air up to 98% at 25 °C.
Only VIZIT-RF2 keys (125 KHz ) are supported.
Only VIZIT-TM keys (DS1990A / iButton® from Dallas Semiconductor) are supported.
PARTS LIST
Doorstation BVD-311(R) 1 pc.
Mounting kit 1pc.
Operating instruction 1pc.
Package 1pc.
The rest of equipment needed for multi-apartment doorphones VIZIT is available upon request.
SAFETY INSTRUCTIONS
The doorstation does not contain voltage above 18 VDC.
Connect the grounding wire of the doorstation to the protective ground.
To avoid damage do not make any connections or repair when the power is on.
INSTALLATION
ATTENTION! To maximize the reliability of this product, do not expose it to rain, snow or direct sun rays!
Before mounting, examine carefully the operating instruction for the installation order and wiring diagrams.
Make holes in the mounting box (supplied) to draw the wires through. Fix the doorstation on a door or
on a wall, following the directions on Figures 4- 7. Use the screws from the mounting kit.
Drive the gags (supplied) into mounting holes.
Perform all connections according to the examples of wiring diagrams on Figures 1, 2and 3.
Abbreviations used on Figures 1- 3:
GND - GROUND; +DL, -DL - Door Lock;
TM - TM-Button Reader; OP - OPEN;
SP - Speaker; LN - Intercom line;
+E - Doorstation Supply Voltage; Ek - Code & Supply Voltage for
MIC - Mic Amp Output; Commutators;
DSD - Doorstation Data; SEL - SELECT.
Name
BVD-311
BVD R-311
Reader
ü
RFID TM-button
ü
Figure 1 - Doorstation BVD-311(R) with control unit BUD-302,
electromagnetic lock VIZIT-ML400 and EXIT button
Figure 2 - Doorstation BVD-311(R) with control unit BUD-302,
electromagnetic lock VIZIT-ML400 and button with N.O. contacts for exit
Figure 3 - Doorstation BVD-311(R) with control
unit BUD-302 and electromechanical lock
RX
SP-
TX
Control unit
BUD-302
45
+DL
-DL
OP
TM
SP+
GND
MIC
+E
DSD
13
RED
GREEN WHITE
BLACK
BLUE
62
Electromagnetic
lock VIZIT-ML400
Button
“EXIT 300”
2TM
3SP
5 MIC
1 GND
4+E
6 DSD
1 2 365
4
Doorstation
-311( )BVD R
LINE
GND
Ek
SEL
to commutators
RX
SP-
TX
Control unit
BUD-302
45
+DL
-DL
OP
TM
SP+
GND
MIC
+E
DSD
1362
2TM
3SP
5 MIC
1 GND
4+E
6 DSD
1 2 365
4
Doorstation
-311( )BVD R
LINE
GND
Ek
SEL
to commutators
Button
for exit
Electromagnetic
lock VIZIT-ML400
RX
SP-
TX
Control unit
BUD-302
45
+DL
-DL
OP
TM
SP+
GND
MIC
+E
DSD
1362
2TM
3SP
5 MIC
1 GND
4+E
6 DSD
1 2 365
4
Doorstation
-311( )BVD R
LINE
GND
Ek
SEL
to commutators
Electromechanical
lock
Imax=1.5 A
1N4007
67
0#
987
654
321
180
28
160
145
17
90
Figure 4. Doorstation mounting dimensions Figure 5. Mounting box
Figure 6. Doorstation wall-mounting Figure 7. Doorstation door-mounting
43
78
13
32
160
174
14
2,5
4,5
125
Æ5,5
Hole
Male screws Ì5 Screws 3
  • Page 1 1
  • Page 2 2
  • Page 3 3

ViziT BVD-311R Operating instructions

ViziT
Brand
ViziT
Model
BVD-311R
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents