ViziT BVD-432RCB Operating instructions

ViziT
Brand
ViziT
Model
BVD-432RCB
Type
Operating instructions

ViziT BVD-432RCB is a door station that operates with the Control Unit BUD-420M in VIZIT multi-apartment doorphones and video doorphones of Series 400. It features a keypad, microphone, concierge call button, LCD, camera, illumination for the camera, speaker, and RF-keys reader. The device can be wall-mounted and has dimensions of 190 x 150 x 41 mm. It operates on a voltage of 16 VDC and consumes 3 W of power. The camera has a lens with a view angle of 76 degrees (diagonal), uses the PAL color system, and has a resolution of 380 TVL.

ViziT BVD-432RCB is a door station that operates with the Control Unit BUD-420M in VIZIT multi-apartment doorphones and video doorphones of Series 400. It features a keypad, microphone, concierge call button, LCD, camera, illumination for the camera, speaker, and RF-keys reader. The device can be wall-mounted and has dimensions of 190 x 150 x 41 mm. It operates on a voltage of 16 VDC and consumes 3 W of power. The camera has a lens with a view angle of 76 degrees (diagonal), uses the PAL color system, and has a resolution of 380 TVL.

BVD-432RCB
BVD-432RCB BUD-420M VIZIT
R
С
В
Doorstation operates together with Control Unit in multi apartment doorphones and
video doorphones of Series 400.
Abbreviations used:
- RFID Reader (PROXIMITY, 125 kHz);
- Colour Camera;
- Board Lens.
PARTS LIST
Figure 1 - Outward appearance and controls layout
1
2
3
4RF-keys Reader
Speaker
Illumination for the Camera
Camera Keypad
6
7
8
5
LCD
Concierge CALL Button
Microphone
5
6
7
8
2
3
4
1
Screw 4х30 Concrete Insert 6х30
x 4 x 4
Gag
x 8
Operating
Instruction
x 1x 1 BVD-432RCB
SAFETY INSTRUCTIONS
INSTALLATION
The product does not contain voltage above .
Take care not to spill any liquids or chemically active substances on the product.
Unplug the Control Unit before cleaning the doorstation. Clean by wiping with dry soft cloth.
Do not use any liquid cleaners, aerosol cleaners or abrasive agents.
Do not perform any connections or repair when the power is on!
Do not modify the product design and circuits yourself.
Refer to a Qualified Service Personnel.
Before mounting, examine carefully the operating instruction for the installation order and wiring diagrams.
Acceptable cross-sections of wires are given in the Control Unit BUD-420M Operating Instruction.
18V
WARNING
§
§
Connect the grounding wire of the doorstation to the protective ground.
Figure 2 - Doorstation Wall-mounting
1
2
3
4
5
Wall recess for the doorstation, 155 x 125 x 35 mm
Hole ( ) 6 mm diameter, 30 mm depthх4
Concrete Insert 6х30 ( )х4
Doorstation
Screw 4х30 ( )х4
6Gag ( )х4
Mounting items (3,5,6) are supplied.
155
125
35
6
2
3
5
4
1
Abbreviations used on Figures :
VO - VIDEO OUT;
VG - VIDEO GROUND;
CUD - Control Unit Data;
DSD - Doorstation Data;
+Е - Doorstation Supply Voltage;
MIC - Microphone;
SP-, SP+ - Speaker;
ТМ - TM-reader ;
GND - GROUND.
4-7
(reserved)
50 cm
76°
- direct rays of sun or other light sources
- direct hit of rain and snow
Locate the doorstation to avoid:
150 cm
50 cm
Figure 3 - Recommended doorstation position and camera field of view
To protect the doorstation from sun, rain and snow, MK-432 Mounting Kit is recommended to be installed.
Figure 4 - Terminals layout
VO
VG
TM
SP+
SP-
MIC
GND
+E
DSD
CUD
WIRING DIAGRAMS
To commutators
LINE
GND
SEL1
Ek
USE
Evk
GND
GND
SEL0
+DL
-DL
OP
TM
SP+
SP-
MIC
GND
+E
DSD
CUD
12387
6
5
4
MLEL
LOCK
Red
Green
White
Black
Blue
EXIT 300
Button
Electromagnetic Lock
VIZIT-ML400
Control Unit
BUD-420М
8
7
6
5
4
3
2
1
Doorstation
BVD-432RCB
VO
VG
TM
SP+
SP-
MIC
GND
+E
DSD
CUD
Figure 5 - Doorstation ,BVD-432RCB -420М
VIZIT-ML400 EXIT 300
with Control Unit electromagnetic lock
and button
BUD
Figure Doorstation with Control Unit electromagnetic lock
and button for exit
BVD BUD6 - ,-432RCB -420М
VIZIT-ML400
Electromagnetic Lock
VIZIT-ML400
Button
for exit
To commutators
LINE
GND
SEL1
Ek
USE
Evk
GND
GND
SEL0
+DL
-DL
OP
TM
SP+
SP-
MIC
GND
+E
DSD
CUD
123 87
6
5
4
MLEL
LOCK
8
7
6
5
4
3
2
1
VO
VG
TM
SP+
SP-
MIC
GND
+E
DSD
CUD
Doorstation
BVD-432RCB
Control Unit
BUD-420М
Figure Doorstation with Control Unit
and electromechanical lock
BVD BUD7 - -432RCB -420М
Electromechanical lock
To commutators
LINE
GND
SEL1
Ek
USE
Evk
GND
GND
SEL0
+DL
-DL
OP
TM
SP+
SP-
MIC
GND
+E
DSD
CUD
123 87
6
5
4
MLEL
LOCK
1N4007
Imax=1.5 A
8
7
6
5
4
3
2
1
VO
VG
TM
SP+
SP-
MIC
GND
+E
DSD
CUD
Doorstation
BVD-432RCB
Control Unit
BUD-420М
SPECIFICATIONS
Operating voltage,
Power consumption,
Dimensions,
Weight,
Camera parameters
Operating Conditions:
Ambient temperature range from to
Relative humidity of air up to at .
Content of doorphone (video doorphone) system, its features, order of programming and operation are described
in the Control Unit BUD-420M Operating Instruction.
VDC 16
W3
mm 190 x 150 x 41
kg 0.85
-30°C 45°C
98% 25°C
Lens
View angle (diagonal),°
Colour system
Scanning system
Resolution, TVL
Output voltage,
at 75 OhmVpp
Minimum illumination of an
object at 50 cm distance from
the camera, Lux
Board
³120
PAL
СCIR
380
0.1
1 ± 0.15
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

ViziT BVD-432RCB Operating instructions

ViziT
Brand
ViziT
Model
BVD-432RCB
Type
Operating instructions

ViziT BVD-432RCB is a door station that operates with the Control Unit BUD-420M in VIZIT multi-apartment doorphones and video doorphones of Series 400. It features a keypad, microphone, concierge call button, LCD, camera, illumination for the camera, speaker, and RF-keys reader. The device can be wall-mounted and has dimensions of 190 x 150 x 41 mm. It operates on a voltage of 16 VDC and consumes 3 W of power. The camera has a lens with a view angle of 76 degrees (diagonal), uses the PAL color system, and has a resolution of 380 TVL.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents