Thank you for buying an Angelo Décor Fountain!
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need mor
e
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information
.
First un
p
ack carton carefull
y
, arran
g
in
g
p
arts safel
y
in
y
our workin
g
area.
Adjust pump to the desired setting. Connect tubing to the pump.
cord seal. Check to ensure the cord seal
is tight.
Run tubing through riser section. Twist and lock riser to pump house. Connect the tubing to the top
section by metal slip fit.
Twist and lock riser to top. Install spill bucke
t
Apply silicone as needed
using grooves. to seal bucket into
Position bucket so it place.
will spill forward.
Final Assembly should look like this
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend kee
p
in
g
bowl 3/4 full of water to avoid
p
um
p
burnout.
Your fountain works better and lasts longer when kept clean using mild soap and soft cloth on a regular basis.
Pump comes pre-installed with
/
