Thank you for buying an Angelo Decor Fountain!
We ho
e
ou will find these instructions hel
ful in settin
u
our fountain. If
ou need mor
information to
ro
erl
care for
our fountain,
lease DO NOT return the unit to
lace of
urchase.
Please visit our web site, www.an
elodecor.com, for assistance and warrant
information.
First un
ack carton carefull
, arran
in
arts safel
in
our workin
area
Pump and cord seal come pre-installed. Install riser, twist and lock in place. Connect the pump tubing
Check to ensure seal is tight and secure. as shown.
Slide middle riser in place. Connect the pump to the Connect the tubing from Slide top section int
Pump tubing down to pump. tubing. the top piece to the middle place.
as shown.
Final assembly
should look like
this
Pump should sit as Insert pump access Ensure top is secure and
as shown. door. firmly in place.
Now sim
l
fill with clean water and
lu
into a
rounded GFCI outle
We recommend kee
in
bowl 3/4 full of water to avoid
um
burnout.
Your fountain will work better, and last longer, when kept clean using a soft cloth and mild soap on a regular basis.
This item should be stored properly for harsh winters, as water left to freeze in the bowl may cause cracking, which
is not covered by warranty. May we suggest you disassemble the unit for the winter months,
removing pump and all water, and store in the garage or shed for best results.