Angelo Decor AD29080 Operating instructions

Angelo Decor
Brand
Angelo Decor
Model
AD29080
Type
Operating instructions
Thank you for buyin
g
an An
g
elo Decor Fountain!
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need mor
e
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
Fi
rst un
p
ac
k
carton care
f
u
lly
, arran
gi
n
g
p
arts sa
f
e
ly
i
n
y
our wor
ki
n
g
area.
The pump and cord seal Feed the power cord through Align with the groove
are pre-installed. Ensure the the bowl, riser and the base. at the bottom.
cord seal is tight.
Twist and lock the riser to the base. Twist and lock the bowl to the riser. Put the nozzle into the pump cover.
(short nozzle shown)
Set the pump cover into place and make sure
the nozzle is straight.
Please note: Two nozzles are included for your choice of
water effect. The large nozzle is shown here and the
short one is shown above.
Now sim
p
l
y
fill with clean water and
p
lu
g
into a
g
rounded GFCI outle
t
W
e recommen
d
k
ee
pi
n
g
b
ow
l
3/4
f
u
ll
o
f
water to avo
id
p
um
p
b
urnout.
Your fountain will work better, and last longer, when kept clean using a soft cloth and mild soap on a regular basis.
This item should be stored properly for harsh winters, as water left to freeze in the bowl may cause cracking,
which is not covered by warranty. May we suggest you disassemble the unit for the winter months,
removing pump and all water, and store in the garage or shed for best results.
  • Page 1 1

Angelo Decor AD29080 Operating instructions

Angelo Decor
Brand
Angelo Decor
Model
AD29080
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents