Mystique Fountain
AD95227
Mystique Fountain
AD95227
Thank you for buying an Angelo Décor Fountain!
Thank you for buying an Angelo Décor Fountain!
We hope you will find these instructions helpful in setting up your fountain.
We hope you will find these instructions helpful in setting up your fountain.
If you have any issues with this item please DO NOT return the unit to place of purchase
If you have any issues with this item, please DO NOT return the unit to place of purchase.
Please visit our web site, www.angelodecor.com, for assistance and warranty information.
Please visit our web site, www.angelodecor.com, for assistance and warranty information.
First unpack carton carefully arranging parts safely in your working area
First unpack carton carefully, arranging parts safely in your working area.
Arrange all pieces in
Pass the cord from the
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace.
Pass the cord from the
light through the
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace.
Pass the cord from the
light through the
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
Place the pump inside the fountain so that the
The pump is set to full
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
Place the pump inside the fountain so that the
The pump is set to full
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
i ht) Att h th t bi t th fitti th
The pump is set to full
strength. Adjust as
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
btt fth liht
The pump is set to full
strength. Adjust as
needed if splash is a
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
Align the power cords
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush Align the power cords
with the grove and
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush
with the reservoir.
Align the power cords
with the grove and
install the pump access
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush
with the reservoir.
Align the power cords
with the grove and
install the pump access
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush
with the reservoir.
Align the power cords
with the grove and
install the pump access
door.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush
with the reservoir.
Align the power cords
with the grove and
install the pump access
door.
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush
with the reservoir.
Align the power cords
with the grove and
install the pump access
door.
The final assembly should
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush
with the reservoir.
Align the power cords
with the grove and
install the pump access
door.
The final assembly should
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush
with the reservoir.
Align the power cords
with the grove and
install the pump access
door.
The final assembly should
look like this
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush
with the reservoir.
Align the power cords
with the grove and
install the pump access
door.
The final assembly should
look like this
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Arrange all pieces in
your workspace. Pass the cord from the
light through the
opening at the front as
shown above.
Attach the included
tubing to the pump. Place the pump inside the fountain so that the
tubing sticks out through the front (see above
right). Attach the tubing to the fitting on the
bottom of the light.
Press the LED light into
hole so that it sits flush
with the reservoir.
Align the power cords
with the grove and
install the pump access
door.
The final assembly should
look like this
The pump is set to full
strength. Adjust as
needed if splash is a
concern.
Attach the cord from the light to the transformer.
Now simply fill with clean water and plug into a grounded GFCI outlet
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend keeping bowl 3/4 full of water to avoid pump burnout
We recommend keeping bowl 3/4 full of water to avoid pump burnout.
Product must be properly stored for winter.
Product must be properly stored for winter.
/