2. Angelo Decor
  3. AD93326

Angelo Decor AD93326 Operating instructions

  • Hello, I'm your chat assistant. I've reviewed the Angelo Décor Fountain user manual, specifically for the AD93326 model. This document provides detailed instructions on unpacking, assembling, and operating the fountain, including how to connect the tubing and position the pump. I'm ready to answer any questions you have regarding the instructions or the fountain itself.
  • What should I do if I have issues with the fountain?
    What should I do with the fountain in the winter?
    How full should the bowls be with water?
Thank you for buying an Angelo Décor Fountain!
We hope you will find these instructions helpful in setting up your fountain.
If
y
ou have an
y
issues with this item, please DO NOT return the unit to place of purchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First unpack carton carefully, arranging parts safely in your working area.
Arrange all parts in Feed the tubing from the top bowl Slide the top bowl into place The top bowl should look
the work area. through the opening as shown. as illustrated above. like this when set in place.
Slide the middle bowl into place. Slide the final bowl into place as Connect the pump to the tubing
shown above. from the top section of the fountain.
Place the pump inside the reservoir.
Install the pump access door.
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend keeping bowl 3/4 full of water to avoid pump burnout
The final assembly
should look like this
We
recommend
keeping
bowl
3/4
full
of
water
to
avoid
pump
burnout
.
Product must be properly stored for winter.
/